Overclock.net banner

Phobya Xtreme 400mm Radiator

620 views 0 replies 1 participant last post by  Overclock Reviews 
#1 ·
Phobya Xtreme 400mm Radiator

Description:
An absolute highend radiator is characterized by a sharp price / performance ratio of these new Phobya radiator. The new Phobya only offer excellent optics and high quality workmanship and absolute top-cooling performance. The Phobya radiators of the new Xtreme series are amongst the absolute high-end heat exchangers. The copper fins are specially designed super silent fan (low capacity). For a very low flow resistance of the parallel channels. Perfect for the slowly rotating huge fan of 180mm and 200mm.

The highlight of this radiator are a removable fan cover. On this panel are several fan M3 threaded holes around the compatibility of various fans and accordingly to allow for housing. Another idea would be to appoint an additional panel and mount them on both sides. Could with less speed and the resulting lower noise, the same cooling performance can be achieved. Conversely, of course, would be out of there at full power even more cooling power!

The Phobya Xtreme 400 radiator can also be operated passively, the performance for medium to large systems is more than sufficient. For this may be the panel to which the fan is screwed, simply omitted, so that the full surface comes into contact with the surrounding air, thus providing even better passive cooling performance!

In the radiator already 4x 1 / 4 inch thread are integrated, allowing the removal of all standard taps. Through the included black nickel-plated plugs, the two unused ports are closed.

Note: The red-brown "deposits" on the fins is not rust. Please note that this is a copper radiator. The complete radiator was covered with black paint, which was applied to the plate just enough that the lens looks good, but the cooling performance is not affected.
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top