Overclock.net › Components › Fans & Heatsinks › Water Cooling › Watercool Heatkiller MO-RA3 360 Core

Watercool Heatkiller MO-RA3 360 Core

Posted

Pros: good rad, kind of restrictive (but that is expected)

Cons: tough to mount,

I like the rad - looks great and cools pretty well.

The screws they send are not the best... also, you will likely need to buy the mounting rails if you are going to use them w/in a case.
Watercool Heatkiller MO-RA3 360 Core
Description:

The MO-RA3 Core utilises a slightly modified cooling design. The cooling fluid passes the tubes in a three-time parallel layout. The fins of the MO-RA3 have been optimised specifically for low-rpm fans. Their enormous surface and effective geometry guarantee excellent cooling performance. The highly parallel layout and the flow-optimised connection block ensure a low flow-resistance, despite the large size of the heat-exchanger. The connection block improves flexibility as well by providing G1/4“ threads in three directions. The MO-RA3 Core is shipped without casing. It is meant for individual designs and may be used actively or passively. Four M4 threads per side may be used for self-made fan grills or for mounting it on a case. The MO-RA3 fan grills cannot be mounted on the MO-RA3 Core. The MO-RA3 is produced in Europe. Development and final assembly happen in Germany, like the manufacturing of most of its components.

Details:
DetailValue
Models:
Model Name/TypeMPNEAN/UPC
Overclock.net › Components › Fans & Heatsinks › Water Cooling › Watercool Heatkiller MO-RA3 360 Core