Watercool Heatkiller MO-RA3 360 Core
Description:
The MO-RA3 Core utilises a slightly modified cooling design. The cooling fluid passes the tubes in a three-time parallel layout. The fins of the MO-RA3 have been optimised specifically for low-rpm fans. Their enormous surface and effective geometry guarantee excellent cooling performance.
The highly parallel layout and the flow-optimised connection block ensure a low flow-resistance, despite the large size of the heat-exchanger. The connection block improves flexibility as well by providing G1/4" threads in three directions.
The MO-RA3 Core is shipped without casing. It is meant for individual designs and may be used actively or passively. Four M4 threads per side may be used for self-made fan grills or for mounting it on a case. The MO-RA3 fan grills cannot be mounted on the MO-RA3 Core.
The MO-RA3 is produced in Europe. Development and final assembly happen in Germany, like the manufacturing of most of its components.
Description:
The MO-RA3 Core utilises a slightly modified cooling design. The cooling fluid passes the tubes in a three-time parallel layout. The fins of the MO-RA3 have been optimised specifically for low-rpm fans. Their enormous surface and effective geometry guarantee excellent cooling performance.
The highly parallel layout and the flow-optimised connection block ensure a low flow-resistance, despite the large size of the heat-exchanger. The connection block improves flexibility as well by providing G1/4" threads in three directions.
The MO-RA3 Core is shipped without casing. It is meant for individual designs and may be used actively or passively. Four M4 threads per side may be used for self-made fan grills or for mounting it on a case. The MO-RA3 fan grills cannot be mounted on the MO-RA3 Core.
The MO-RA3 is produced in Europe. Development and final assembly happen in Germany, like the manufacturing of most of its components.