Overclock.net - Cooling - Recent Changeshttp://www.overclock.net/livefeed.rssTrack the most recent changes to the overclock.net community with this feedenHuddler 0.1Thu, 27 Nov 2014 11:50:04 +0000I'm making the switch and need some help! http://www.overclock.net/t/1526997/im-making-the-switch-and-need-some-help "I'm getting a new case! I'm getting new sleeves! I'm going to top it off with liquid..."threadThu, 27 Nov 2014 04:51:20 +0000FremishThu, 27 Nov 2014 04:51:20 +0000#83742291Supremacy EVO refuses to meet the IHShttp://www.overclock.net/t/1526960/supremacy-evo-refuses-to-meet-the-ihs "Setup: Gigabyte EX58-UD5, i7 980x, and EK Supremacy EVO (nickel/acetal). (Forgot to..."threadThu, 27 Nov 2014 01:18:41 +0000AsterraThu, 27 Nov 2014 01:18:41 +0000#83740385Need advice on rigid acrylic tubinghttp://www.overclock.net/t/1526937/need-advice-on-rigid-acrylic-tubing "I can't find cheap 12/16mm rigid tubing and FrozenCPU has a 1000mm bitspower crystal..."threadWed, 26 Nov 2014 22:49:18 +0000ALT F4Wed, 26 Nov 2014 22:49:18 +0000#83739032EK's waterblock compatibility sheet?http://www.overclock.net/t/1526927/eks-waterblock-compatibility-sheet "Anyone have a link to the whole sheet for GPU waterblock compatibility stuff? I'm kind..."threadWed, 26 Nov 2014 22:26:23 +0000DRT-MaverickWed, 26 Nov 2014 22:26:23 +0000#83738805Does EK 19/13 comp. Fittings fit on Alphacool NexXxoS XP³ ?http://www.overclock.net/t/1526908/does-ek-19-13-comp-fittings-fit-on-alphacool-nexxxos-xp "Can someone confirm or deny?"threadWed, 26 Nov 2014 20:05:41 +0000Duddits11Wed, 26 Nov 2014 20:05:41 +0000#83737269EK-FC7970http://www.overclock.net/t/1526882/ek-fc7970 "Hi everyone! I'm a newbie to water-cooling. I picked these up in a trade, and I'm..."threadWed, 26 Nov 2014 17:39:49 +0000PsistormWed, 26 Nov 2014 17:39:49 +0000#83735754I cannot get all the air bubbles out of my CPU blockhttp://www.overclock.net/t/1526864/i-cannot-get-all-the-air-bubbles-out-of-my-cpu-block " I have tried tilting the case every which way but upside down, I've tapped on the..."threadWed, 26 Nov 2014 15:42:11 +0000aliensbruhWed, 26 Nov 2014 15:42:11 +0000#83734570Anyone have experience with Lian Li PC-A79 case and air coolinghttp://www.overclock.net/t/1526862/anyone-have-experience-with-lian-li-pc-a79-case-and-air-cooling "Hello Is there anyone on the forum with the PC-A79 by Lian Li. I have used my PC9F for..."threadWed, 26 Nov 2014 15:31:22 +0000msqdavbarWed, 26 Nov 2014 15:31:22 +0000#83734440Cooling issues - GTX670http://www.overclock.net/t/1526861/cooling-issues-gtx670 "First a description of my rig so that you have the background: Case: Coolermaster..."threadWed, 26 Nov 2014 15:17:58 +0000o13102Wed, 26 Nov 2014 15:17:58 +0000#83734270Slim 120mm PWM fan recommendations, plus fan control problemshttp://www.overclock.net/t/1526849/slim-120mm-pwm-fan-recommendations-plus-fan-control-problems "My two issues are obtaining a slim fan to replace a 25mm stock fan on an AIO water..."threadWed, 26 Nov 2014 13:59:04 +0000ButtoneerWed, 26 Nov 2014 13:59:04 +0000#83733646Does Ek just resurrect that good old Gt AP-15?http://www.overclock.net/t/1526843/does-ek-just-resurrect-that-good-old-gt-ap-15 "Ek just released the new EK-Vardar series : Limited stock release : mid December..."threadWed, 26 Nov 2014 11:39:46 +0000kichimouWed, 26 Nov 2014 11:39:46 +0000#83732698Thermatake Water 3.0 ultimate http://www.overclock.net/t/1526842/thermatake-water-3-0-ultimate "g'day Can any confirm my suspicion that the Thermaltake Water 3.0 Ultimate CPU..."threadWed, 26 Nov 2014 10:54:17 +0000iscariotWed, 26 Nov 2014 10:54:17 +0000#83732432Restriction within an elaborate loophttp://www.overclock.net/t/1526815/restriction-within-an-elaborate-loop "Long time lurker first time poster here gents. I have committed to doing an all out..."threadWed, 26 Nov 2014 05:06:12 +0000BooffWed, 26 Nov 2014 05:06:12 +0000#83730730User review of the Swiftech H220-Xhttp://www.overclock.net/t/1526779/user-review-of-the-swiftech-h220-x "I know the party started long ago, but I only got this a couple of weeks back after I..."threadWed, 26 Nov 2014 00:51:10 +0000geggegWed, 26 Nov 2014 00:51:10 +0000#83728454Beginning my first water loophttp://www.overclock.net/t/1526774/beginning-my-first-water-loop "<a href="http://i.imgur.com/Z7svvYZ.jpg" target="_blank">http://i.imgur.com/Z7svvYZ.jpg</a> So there's all my goodies for this Thanksgiving..."threadWed, 26 Nov 2014 00:06:26 +0000solarcycle24Wed, 26 Nov 2014 00:06:26 +0000#83728027Laing D5 pump - did I get ripped off?http://www.overclock.net/t/1526763/laing-d5-pump-did-i-get-ripped-off "I recently bought an EK X-RES Vario 100 from Performance PCs. It is already..."threadTue, 25 Nov 2014 22:59:03 +0000AsterraTue, 25 Nov 2014 22:59:03 +0000#83727319Bitspower New Reservoirs Z-Multi Ultra 50/100/150/200/250 (POM Version)http://www.overclock.net/t/1526728/bitspower-new-reservoirs-z-multi-ultra-50-100-150-200-250-pom-version "Yes New high quality reservoirs from Bitspower. BP-WTZMU50P-BKCL Bitspower..."threadTue, 25 Nov 2014 20:10:12 +0000TATHTue, 25 Nov 2014 20:10:12 +0000#83725493MTEC controllerhttp://www.overclock.net/t/1526727/mtec-controller "Does anyone have an extra or know where to find one...I have burnt contacts on "a" side..."threadTue, 25 Nov 2014 19:57:35 +0000ffrazier1961Tue, 25 Nov 2014 19:57:35 +0000#83725346120mm under 20$http://www.overclock.net/t/1526713/120mm-under-20 "Any idea of the best fan under 20$ that will have the most cfm-rpm I seen some noctua..."threadTue, 25 Nov 2014 17:45:13 +0000bonami2Tue, 25 Nov 2014 17:45:13 +0000#83724019Can I add a second GPU to my rig?http://www.overclock.net/t/1526683/can-i-add-a-second-gpu-to-my-rig "Hi, In my old setup I have 2 radiators, a XSPC RS120 and a XSPC RS240. I have an..."threadTue, 25 Nov 2014 14:22:31 +0000shapulTue, 25 Nov 2014 14:22:31 +0000#83722204Changing water, weird colors...http://www.overclock.net/t/1526661/changing-water-weird-colors "Hi everybody ! I have taken my loop apart to change the water, this is the first time..."threadTue, 25 Nov 2014 09:50:54 +0000saberkickTue, 25 Nov 2014 09:50:54 +0000#83720592Quick question about fan hubhttp://www.overclock.net/t/1526641/quick-question-about-fan-hub "Just finalized my rudimentary loop and got most of the air out, and am currently..."threadTue, 25 Nov 2014 06:10:47 +0000AsterraTue, 25 Nov 2014 06:10:47 +0000#83719407WC Fan options Questionhttp://www.overclock.net/t/1526628/wc-fan-options-question "Hi there my motherboard has the following connections for fans My board is Asrock..."threadTue, 25 Nov 2014 04:29:05 +0000mixsetupTue, 25 Nov 2014 04:29:05 +0000#83718735DarkSide (Feser / TFC) Tube + Swiftech Compression Fittingshttp://www.overclock.net/t/1526617/darkside-feser-tfc-tube-swiftech-compression-fittings "Hello, The other day I was all set to put my loop together when I ran into a road..."threadTue, 25 Nov 2014 03:13:49 +0000LickerTue, 25 Nov 2014 03:13:49 +0000#83718020Antec 1200 http://www.overclock.net/t/1526604/antec-1200 "Hey guys I recently got a GeForce 980 GTX and the card is huge. So big its right on..."threadTue, 25 Nov 2014 01:26:47 +0000pun3DTue, 25 Nov 2014 01:26:47 +0000#83717037Reccomended low-profile air coolers less than 65mm highhttp://www.overclock.net/t/1526600/reccomended-low-profile-air-coolers-less-than-65mm-high "Hey guys, for my next build i am plannig on making my own case, as small as possible,..."threadTue, 25 Nov 2014 01:21:56 +0000James4832Tue, 25 Nov 2014 01:21:56 +0000#83716948Help ID a HD 5850 Waterblockhttp://www.overclock.net/t/1526588/help-id-a-hd-5850-waterblock "Hi guys. I could use some help identifying the pictured waterblock. It came with a..."threadTue, 25 Nov 2014 00:40:47 +0000VarioTue, 25 Nov 2014 00:40:47 +0000#83716453Airflow direction?http://www.overclock.net/t/1526573/airflow-direction "So, my actual setup is intake from the bottom/front and exhaust to top/rear, and a side..."threadTue, 25 Nov 2014 00:15:21 +0000ianx47Tue, 25 Nov 2014 00:15:21 +0000#83716183I need 140mm case fan recommendations in the $15 price rangehttp://www.overclock.net/t/1526547/i-need-140mm-case-fan-recommendations-in-the-15-price-range "No more than $15, and the cheaper the better! My build: Phanteks Enthoo..."threadMon, 24 Nov 2014 23:00:18 +0000bakingbread86Mon, 24 Nov 2014 23:00:18 +0000#83715382Air cooler recommendations in antec 300http://www.overclock.net/t/1526534/air-cooler-recommendations-in-antec-300 "I need some recommendations for a good air cooler for my budget build in an antec 300..."threadMon, 24 Nov 2014 22:26:16 +0000matt406regalMon, 24 Nov 2014 22:26:16 +0000#83715011Need suggestions for good HDD Cooling bayhttp://www.overclock.net/t/1526524/need-suggestions-for-good-hdd-cooling-bay "Hi there I'm new here I need suggestions for good Cooling bay for my HDD, one that..."threadMon, 24 Nov 2014 21:29:47 +0000Egozi44Mon, 24 Nov 2014 21:29:47 +0000#83714391case airflow!http://www.overclock.net/t/1526509/case-airflow "Hi everyone im currently with 2 arctic cooling f12 the dual ball bearing server version..."threadMon, 24 Nov 2014 19:43:26 +0000bonami2Mon, 24 Nov 2014 19:43:26 +0000#83713169Condensation inside my case? Leaking radiator?http://www.overclock.net/t/1526492/condensation-inside-my-case-leaking-radiator "Hi I am currently using CM Nepton 280L for 3 months. Today while peering through my..."threadMon, 24 Nov 2014 17:56:25 +0000dansiMon, 24 Nov 2014 17:56:25 +0000#83711851Corsair PWM LED Fans out of spec, too?http://www.overclock.net/t/1526490/corsair-pwm-led-fans-out-of-spec-too "Hey there, I know that the non-LED PWM fans from Corsair (specifically the SP120s)..."threadMon, 24 Nov 2014 17:37:13 +0000Someone09Mon, 24 Nov 2014 17:37:13 +0000#83711665Minimizing noise and dust in the expense of heathttp://www.overclock.net/t/1526478/minimizing-noise-and-dust-in-the-expense-of-heat "Hey all, I'm a user who is not interested in overclocking. I'm interested in building..."threadMon, 24 Nov 2014 16:40:21 +0000findingthelimitMon, 24 Nov 2014 16:40:21 +0000#83711073Are these okay temperatures?http://www.overclock.net/t/1526450/are-these-okay-temperatures "I'm using an Antec Kuhler h2o 920 (<a href="http://www.antec.com/product.php?id=704370&amp;pid=17" target="_blank">http://www.antec.com/product.php?id=704370&amp;pid=17</a>..."threadMon, 24 Nov 2014 13:12:45 +0000jebibowMon, 24 Nov 2014 13:12:45 +0000#83709161Best water cooling setup for my new rig?http://www.overclock.net/t/1526422/best-water-cooling-setup-for-my-new-rig "Hello, I am new to the forums! I have ordered the Phanteks Enthoo Luxe which will..."threadMon, 24 Nov 2014 06:37:10 +0000FantasticDroneMon, 24 Nov 2014 06:37:10 +0000#83706963Boreas chillerhttp://www.overclock.net/t/1526419/boreas-chiller "i bought a silverstone mtec chilled case over 5 yrs ago and still kicking it...to me..."threadMon, 24 Nov 2014 06:14:17 +0000ffrazier1961Mon, 24 Nov 2014 06:14:17 +0000#83706881Coolant temperaturehttp://www.overclock.net/t/1526412/coolant-temperature "I'm running 2 GTX 780TIs with a 240mm rad 45mm thick. Just wondering, my coolant gets..."threadMon, 24 Nov 2014 05:44:35 +0000BoatOnGoatMon, 24 Nov 2014 05:44:35 +0000#83706737Case Fans: 120mm with blue LEDs, PWM and as quiet as possiblehttp://www.overclock.net/t/1526367/case-fans-120mm-with-blue-leds-pwm-and-as-quiet-as-possible "Title of the thread says it all really. I know there are a billion threads out there..."threadSun, 23 Nov 2014 23:22:16 +0000twitchthethirdSun, 23 Nov 2014 23:22:16 +0000#83703531Changing Prebuilt water cooling solution - Novice Questionhttp://www.overclock.net/t/1526366/changing-prebuilt-water-cooling-solution-novice-question "I currently have a Asetek watercooling solution that is over 5 years old while playing..."threadSun, 23 Nov 2014 23:05:46 +0000iscariotSun, 23 Nov 2014 23:05:46 +0000#83703362Pump PWM control issuehttp://www.overclock.net/t/1526352/pump-pwm-control-issue "Just got the EK-DCP 4.0 PWM X-RES with the pump pre-installed to it. First off, this..."threadSun, 23 Nov 2014 21:49:04 +0000BoatOnGoatSun, 23 Nov 2014 21:49:04 +0000#83702401Seasoned watercoolers, I am asking for your input on my loop.http://www.overclock.net/t/1526347/seasoned-watercoolers-i-am-asking-for-your-input-on-my-loop "Here is an attatched picture of how I plan to set up my loop. I have a 240mm, a 360mm..."threadSun, 23 Nov 2014 21:12:42 +0000kurtbackerSun, 23 Nov 2014 21:12:42 +0000#83701971HW Labs GTX560 & GTX480 Thermal Dissipationhttp://www.overclock.net/t/1526337/hw-labs-gtx560-gtx480-thermal-dissipation "My setup is in my Rigbuilder profile- Currently I am hoping to cool just my two 780's..."threadSun, 23 Nov 2014 20:15:00 +0000eleven010Sun, 23 Nov 2014 20:15:00 +0000#83701362Should i replace my cpu cooler/pastehttp://www.overclock.net/t/1526321/should-i-replace-my-cpu-cooler-paste "Doing a few upgrades to my pc at the moment and just wondering if it's worth taking my..."threadSun, 23 Nov 2014 19:11:54 +0000K1NGP1N360GAMERSun, 23 Nov 2014 19:11:54 +0000#83700640Advice on new Resv Tube for systemhttp://www.overclock.net/t/1526253/advice-on-new-resv-tube-for-system "I am currently do an upgrade to my system listed in my signature below and have ran..."threadSun, 23 Nov 2014 05:41:05 +0000HiTekJeffSun, 23 Nov 2014 05:41:05 +0000#83695694The downside of using a Phase change and/or extreme coolinghttp://www.overclock.net/t/1526237/the-downside-of-using-a-phase-change-and-or-extreme-cooling "So, as some of you know I recent built a super nice rig with a phase change cooled..."threadSun, 23 Nov 2014 03:48:20 +0000MunneYSun, 23 Nov 2014 03:48:20 +0000#83694802Can someone verify if my pump and radiators are sufficient?http://www.overclock.net/t/1526221/can-someone-verify-if-my-pump-and-radiators-are-sufficient "This is my first loop, so Im a bit of a noob. read some guides but too confusing... Can..."threadSun, 23 Nov 2014 01:58:15 +0000cptn00bSun, 23 Nov 2014 01:58:15 +0000#83693779Corsair H100i loose screws can't hold fan what to do next?http://www.overclock.net/t/1526208/corsair-h100i-loose-screws-cant-hold-fan-what-to-do-next "Hi guys, I bought my pc in parts in april 2013 most of them from scan computers..."threadSun, 23 Nov 2014 00:22:05 +0000evolut1onSun, 23 Nov 2014 00:22:05 +0000#83692795gpus in parallel shouldn't the temps be close to the same?http://www.overclock.net/t/1526205/gpus-in-parallel-shouldnt-the-temps-be-close-to-the-same "I have two cards in a loop connected with a bridge in parallel. Shouldn't both gpu's..."threadSun, 23 Nov 2014 00:06:37 +0000boredmugSun, 23 Nov 2014 00:06:37 +0000#83692590