|
![]() |
Overclock.net - Overclocking.net > Components > Sound Cards and Computer Audio | |
Usb turntable, pointless?
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#11 (permalink) | ||||||||||||
|
Overclocker in Training
|
This has been the most unhelpful thread i've ever made thanks.
__________________
X% of Y have X'd to X. If you are the other X% then Ctrl+C&Ctrl+V
Lets OC the internets.
|
||||||||||||
|
|
|
|
|
#12 (permalink) | |||||||||||||
|
PC Gamer
|
I know someone who has one those turntables and it came w/ some freeware. Here's the link: http://audacity.sourceforge.net/download/
There's a trick to getting the audio to work and here's the info. 1. Launch Audacity: Click on the Start menu on the bottom left of your screen. Select All Programs, then Audacity. 2. In Audacity, click on the Edit menu at the top of the screen. 3. Select Preferences from the Edit menu. The Audacity Preferences window will come up (Figure 2). Choose the Audio I/O tab from the top of the Preferences screen. 4. Set your Playback Device to your internal sound card. Since different computers have different internal sound cards, your selection may be different from the image below (Figure 2). The correct selection, however, will NOT be USB Audio Codec, Microsoft Sound Mapper or Modem. 5. Set your Recording Device to USB Audio Codec. This represents your turntable. Note: The USB turntable may show up with a different name in the Preferences window. This may depend on your computer model and operating system. 99% of the time it will contain “USB” in the Name. 6. Set Channels to 2 (Stereo). 7. Check the box labeled Software Playthrough. 8. Under the Quality tab, set the Default Sample Format to 16- bit. 9. Select OK to save your settings and close the Preferences window. 10. At the top of the main Audacity window, to the right of the play control buttons, you will see the input and output level meters (labeled L and R). Under the output level meter, is an icon that looks like a microphone. Next to the microphone is a black arrow that points down. Click this arrow and select Monitor Input. (If you don't see the input and output level meters, open your Preferences again as described above, select the Interface tab, and make sure that Enable Mixer Toolbar is checked.) You should be all ready to record. Hope this helps out!
__________________
Absolutely graphics when hardware! X-fire username: roosterdewd50% of all statistics can be made to be true 90% of the time. ![]() CPU-Z: http://valid.x86-secret.com/show_oc.php?id=443394 GPU-Z:http://www.techpowerup.com/gpuz/c6349/
|
|||||||||||||
|
|
|
|
|
#13 (permalink) | ||||||||||||
|
Overclocker in Training
|
lol, I use Cool Edit Pro 2.1(though I can't stand no 24-bit recording and lack of asio support.) But that looks really helpful, i'll go try that now, thank you
.As for the quality, do any audiophiles have advice as to which is better recording: 16-bit/48000Hz via usb(digital) or 24-bit/96000Hz via analouge sound card line in.
__________________
X% of Y have X'd to X. If you are the other X% then Ctrl+C&Ctrl+V
Lets OC the internets.
Last edited by Rushnerd : 08-29-08 at 06:00 PM. |
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|