Originally Posted by kckyle;13428792
ok i'm stuck, using my sig rig mobo, so far i put my usb ibm memory key into the 1st drive under boot priority, with my c300 in 2nd drive. i can see the window 98 screen flash real quickly, then it disappear. and now i'm stuck looking at this screen,
microsoft window 98
(c)copyright microsoft corp 1981-1999
Using the USB flash method from the above post.
Sounds like you don't have the autoexec file on your USB stick, check to be sure it's there. You should see the win98 screen, but right after that the firmware update should start automatically.
Hmm, odd though you have C prompt instead of A, that may be the problem.
You might need to edit the autoexec file to reflect C instead of A for your board.
If when at the above mentioned C prompt, type "Dir/w", do you see all the files on the USB? If so, then please boot into windows and edit the autoexec on the USB Stick and change the "A" Prompt you see to a C instead.
In the autoexec file you will see the following on the second line:
SET dosdir=A:\ << Change that to C instead of A