Overclock.net › Forums › Intel › Intel - General › Sudden Bluescreens and Freezes after months of stability
New Posts  All Forums:Forum Nav:

Sudden Bluescreens and Freezes after months of stability

post #1 of 11
Thread Starter 
I've been getting Freezes and sudden Bluescreen 0x0124's now after quite some time of stability.

I started trying to up the QPI voltage and that didnt work, so I upped the Vcore Voltage aswell, and that didnt work.

Then I Set it all back to Stock by reseting the Bios to default, But I've already gotten a Freeze after that.

Can GPU overclocks make me get 0x0124 BSOD's? Ive reset-ed it, so im waiting for results now.

help please
Edited by Norlig - 4/27/11 at 7:12am
post #2 of 11
I thought 0x0124 was RAM...
Xeno Storm V 1.2
(20 items)
 
RetroPie
(13 items)
 
 
CPUMotherboardGraphicsRAM
ARM Cortex-A7 Raspberry Pi 2 Model B Broadcom VideoCore IV 512MB 
Hard DriveHard DriveCoolingOS
64GB Corsair Voyager Go 16GB Micro SD Aluminum heat spreaders RetroPi 
MonitorKeyboardPowerCase
Samsung 23" LED Logitech Wireless Touch Keyboard K400 Anker 24W PowerPort 2 OneNineDesign RasPi Black 
Other
8Bitdo NES30 Pro Controller 
CPUMotherboardGraphicsRAM
i5 7200U Dell Intel HD 8GB LPDDR3 1866MHz 
Hard DriveOSMonitor
M.2 128GB Windows 10 13.3" FHD AG 
  hide details  
Reply
Xeno Storm V 1.2
(20 items)
 
RetroPie
(13 items)
 
 
CPUMotherboardGraphicsRAM
ARM Cortex-A7 Raspberry Pi 2 Model B Broadcom VideoCore IV 512MB 
Hard DriveHard DriveCoolingOS
64GB Corsair Voyager Go 16GB Micro SD Aluminum heat spreaders RetroPi 
MonitorKeyboardPowerCase
Samsung 23" LED Logitech Wireless Touch Keyboard K400 Anker 24W PowerPort 2 OneNineDesign RasPi Black 
Other
8Bitdo NES30 Pro Controller 
CPUMotherboardGraphicsRAM
i5 7200U Dell Intel HD 8GB LPDDR3 1866MHz 
Hard DriveOSMonitor
M.2 128GB Windows 10 13.3" FHD AG 
  hide details  
Reply
post #3 of 11
Check your memory with memtest+.
Frenchy French
(14 items)
 
Upgrade 2013
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 4670K Asus Z87-A Asus GTX 680 G.Skill Ripjaws XL 
Hard DriveCoolingOSKeyboard
CRUCIAL M4 128 Go SSD Corsair hydro series h60 (2013 Edition) Windows 7 Razer Blackwidow Ultimate 
PowerCaseMouseAudio
Corsair HX 850 W Antec 1200 Razer Mamba Razer Megalodon 
  hide details  
Reply
Frenchy French
(14 items)
 
Upgrade 2013
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 4670K Asus Z87-A Asus GTX 680 G.Skill Ripjaws XL 
Hard DriveCoolingOSKeyboard
CRUCIAL M4 128 Go SSD Corsair hydro series h60 (2013 Edition) Windows 7 Razer Blackwidow Ultimate 
PowerCaseMouseAudio
Corsair HX 850 W Antec 1200 Razer Mamba Razer Megalodon 
  hide details  
Reply
post #4 of 11
Thread Starter 
Ive been using this from my old thread

Originally Posted by jasjeet
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0X00000109 << Not enough or too Much memory voltage
__________________

And I ment QPI volt, not ppl, edited in now

Quote:
Originally Posted by Kerian View Post
Check your memory with memtest+.
I'll do a few passes soon-ish

But since you mention memory, I had my GPU memory at 2250. could that give 0x0124 bluescreens?
Edited by Norlig - 4/27/11 at 7:22am
post #5 of 11
Thread Starter 
I updated the Bios to the latest version (1402) and then ran memtest86+.

I got 0 Errors.
post #6 of 11
Probably CPU degradation. The longer you run increased voltage through something the more likely you are for a failure. Try upping the vCore a touch and see if the problem stops.
post #7 of 11
Thread Starter 
I'll do that after the next crash. just gonna see if the Bios update changed anything . but ive already tried that though
post #8 of 11
Quote:
Originally Posted by pangeltveit View Post
I'll do that after the next crash. just gonna see if the Bios update changed anything . but ive already tried that though
You may have to raise it a bit further than you think. Just give it another shot and report back with your results. Also try raising your VTT voltage a touch. It could be that your IMC was degraded a bit and needs more voltage.
post #9 of 11
First thing to do is to see if you get a BSOD at stock (not necessarily a freeze, but that's bad too). Try running prime95 blend at stock and see where that gets you....
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
post #10 of 11
If at some point you determine your OC is not the cause you might consider data or driver corruption. You could try loading in Safe Mode and see if it occurs. Or you might try Restore at a date before this began to happen.
Edited by Albatross1991 - 4/29/11 at 4:10am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Sudden Bluescreens and Freezes after months of stability