Overclock.net › Forums › Cooling › Water Cooling › [Work log] Project Liquid Death
New Posts  All Forums:Forum Nav:

[Work log] Project Liquid Death - Page 35

post #341 of 1486
QD's are very nice and they not as restrictive as most might think (0.3~ 0.15GPM and VL3N right on the middle )
the 45 DEG ~NZL-DXG-V2 or any similar 45 i would try to avoid or get BP instead ,i think they are very similar to this one

as for pumps ..this is exactly what i was talking about in another thread ,even for a small loop (depends how you run it ~tubing length and the amount of compression,45DEG,flow meters ,etc can add up very quick )
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #342 of 1486
Thread Starter 
I'm honestly not sure because running 6 radiators and 12 blocks will be quite restrictive as is and I would be running ~11 pairs of quick disconnects. They'll cost the same as using bitspower rotaries so that's not an issue, but I'm wondering whether the ease of maintenance is worth the reduced flow and whether the reduced flow will be low enough that I'll "need" more pumps.
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
post #343 of 1486
that's exactly why i want to get flow sensor,love D5's and how quite they are but..
Maximum Head Pressure: 10 ft (3.1 m)...2xD5=(20 ft)
Maximum discharge ~ 317 GPH (1200 LPH)<= this don't mean much want's you install it in your loop

single DDC 3.25
Maximum Head Pressure: 7m (23ft)
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #344 of 1486
Thread Starter 
I'd rather add more D5s than have to resort to any type of DDC. I have DDCs in my current build and they're great, but super ugly and cheap feeling. Uber D5s just feel so solid and industrial. I know even 1 would be enough to pump through the whole system, but I want around 1.2gpm. Too lazy to install flow sensors since I'd have to take them from my current build which is a pain in the butt.
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
post #345 of 1486
This thread needs more pics, imo. With such nice hardware, some people would like more pics with more angles. Oh yes, we would.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.08GHz Asus P6X58D-E EVGA GTX470 @ 825MHz Corsair XMS 6GB PC12800 DDR3 
Hard DriveOptical DriveOSPower
WD VelociRaptor 300GB BD Win7 64 Corsiar HX750 
Case
Corsair Obsidian 800D 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.08GHz Asus P6X58D-E EVGA GTX470 @ 825MHz Corsair XMS 6GB PC12800 DDR3 
Hard DriveOptical DriveOSPower
WD VelociRaptor 300GB BD Win7 64 Corsiar HX750 
Case
Corsair Obsidian 800D 
  hide details  
Reply
post #346 of 1486
First of all, D5 (and multiple D5) ftw. Now that that's settled, as to the QDCs: I highly recommend the Koolance ones, and in your particular case it's worth noting the distinction between VL3/4N. The N designator means 'no-spill' (.1ml freed or something insanely small vs 1ml or so in the non-N variety). So the -4N isn't any more leakproof than the -3N, but it is a wider ID and less restrictive than the -3N.

That said, as you know, you can't mix the 3 and 4 series, and even within those, the -# and -#N aren't to be mixed.



Looks great, keep it coming!

Edit: Also, I suggest that you alternate the fittings at the top and bottom of the GPU stack, so that you can run without them in the loop if needed. I did that for testing and it has worked beautifully, much easier than trying to take the block in and out and having the loop down for troubleshooting.

If this example pic is too much I will happily remove it.


Edited by SaltwaterCooled - 6/20/11 at 6:54pm
AC Mk-800 Cobra
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k ASUS P8P67 WS Revolution Zotac GTX 570 Corsair Vengeance 2x4GB 1600MHz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD WD Red WD AV-GP Samsung CD/DVD Combo 
OSMonitorMonitorKeyboard
Win-7 Pro x64 HP LP3065 30" 2560x1600 Dell 1600x1200 Portrait Monoprice Gaming Keyboard w/ MX Blacks 
PowerCaseMouseAudio
Corsair HX850 Modified Corsair Obsidian 800D Logitech G700 X-Fi Titanium PCIe 
Other
Happauge 2250 Tuner Card 
  hide details  
Reply
AC Mk-800 Cobra
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k ASUS P8P67 WS Revolution Zotac GTX 570 Corsair Vengeance 2x4GB 1600MHz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD WD Red WD AV-GP Samsung CD/DVD Combo 
OSMonitorMonitorKeyboard
Win-7 Pro x64 HP LP3065 30" 2560x1600 Dell 1600x1200 Portrait Monoprice Gaming Keyboard w/ MX Blacks 
PowerCaseMouseAudio
Corsair HX850 Modified Corsair Obsidian 800D Logitech G700 X-Fi Titanium PCIe 
Other
Happauge 2250 Tuner Card 
  hide details  
Reply
post #347 of 1486
Thread Starter 
Quote:
Originally Posted by SaltwaterCooled View Post
First of all, D5 (and multiple D5) ftw. Now that that's settled, as to the QDCs: I highly recommend the Koolance ones, and in your particular case it's worth noting the distinction between VL3/4N. The N designator means 'no-spill' (.1ml freed or something insanely small vs 1ml or so in the non-N variety). So the -4N isn't any more leakproof than the -3N, but it is a wider ID and less restrictive than the -3N.

That said, as you know, you can't mix the 3 and 4 series, and even within those, the -# and -#N aren't to be mixed.



Looks great, keep it coming!

Edit: Also, I suggest that you alternate the fittings at the top and bottom of the GPU stack, so that you can run without them in the loop if needed. I did that for testing and it has worked beautifully, much easier than trying to take the block in and out and having the loop down for troubleshooting.

If this example pic is too much I will happily remove it.

Thanks for the input. I'd have to go with the VL3N since the threaded VL4N fittings are G3/8 instead of G1/4. I have some of them in my current loop, but had a pair rust (what the heck right?) after I took it out which was quite strange. The ones without the N are the old QDCs that let tons of water go when disconnected.

I plan for the loop to go like this:

Res->pumps->140 Rad->560 Rad->280Rad-> 560Rad -> split -> CPU 1/CPU2 -> Ram 1+3 -> Ram 2+4 -> both back to Mobo -> 560 rad -> 280 Rad -> Parallel Gpus 1-4 -> Res

I'd toss in the QDCs before and after the CPUS and then before and after the GPUs to make reseating/ swapping hardware super easy.

I've only used Koolance fittings and I've had a generally awesome experience with them so I think I'm going to stick with them and run all chrome/ koolance blocks except for the kryos .925 cpu blocks.

Thanks for the input SWC. Nice progress on ur build btw, get her finished! Don't hold ur breathe for the completion of this build. 6 months will be a conservative estimate. I might go with a X79 board and cpu then as soon as the "SR-3" board is released along side the Xeons I'll pick that up.
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
post #348 of 1486
Thread Starter 
Thought I'd post a little update. (Seems impossible to get a pic with visible components without funky lighting)

Plans for the left side


Plans for the right side


In order for me to place the GTX 280 rad up top I need to have a new top panel cut and since I'm now planning to go push/pull with the 560 rads I need to have a new bottom panel cut in order to accommodate a 140mm fan at the bottom as exhaust along with the dual pumps positioned next to it as shown in the above pic. The new bottom will also be drilled for 4 more case feet. I figured it'll take some stress off of the panels to have more support and might as well have it tapped while they're at it making me a new panel. I'll be mounting the Phobya Balancer 450 to the fans on the left GTX560 radiator with a custom made acrylic bracket from Danger Den. A 2nd HDD bracket will be ordered as well as soon as I stop being lazy and decide to order it. I also need to get to ordering 4 more HDDs sometime this week. I'll also need to order 13 more fans, but that'll have to wait until I get the radiators in. First thing first.

Some more pics


^ every time I look at the case I am more and more impressed with the build quality. It's turning out much better than I had planned. Just sucks that I have to wait for parts to come back in stock.


^I'm not sure whether I want to pick up some black wire fan grills or just leave the fans as is. Let me know what you all think.


^ I feel as tho the bottom of the case needs the 4 extra feet in order to improve it aesthetically more so than even structurally.

The cable routing will actually be super easy in this case since there is just enough room beside all of the radiators to run fan cables. It'll help keep them all organized with just zipties and without even needing ziptie mounts. This case is really win on all levels so far.

Edit: I've been considering SSDs for this build, but I do not want to use a traditional Sata SSD since it would look ugly having to use the 2.5" to 3.5" adapter so I'll be going with a PCIE SSD such as the OCZ Revo X. Not sure what size I'll be getting or how many, but I'm willing to sacrifice a little bandwidth to my gpus for one or 3.

Comments, suggestions, and ideas are always welcome and appreciated.
Edited by fat_italian_stallion - 6/22/11 at 10:20pm
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
 
Project Atlantis
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3960X w/ EK Supreme HF  Asus Rampage IV Extreme w/ EK full cover Tri SLi EVGA GTX TITAN SC w/ EK full cover & Ba... 64 GB Dominator w/ MIPS Ram Cooler 
Hard DriveHard DriveCoolingCooling
1TB Samsung EVO 850 2x 2TB Western Digital Caviar Black 1x Hardware Labs Black Ice GTX 560  Bitspower Pump Upgrade Kit 
CoolingCoolingCoolingCooling
2x Hardware Labs Black Ice GTX 280 Hardware Labs Black Ice GTX 480 Dual Uber MCP655 Noiseblocker PK-3  
CoolingCoolingCoolingOS
Bitspower Compression Fittings Lamptron FC-8 Noiseblocker PL-2 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Asus PB287Q 4K Steelseries 7G Custum wired EVGA NEX 1500 Caselabs SMA8 
MouseMouse Pad
Rat 7 Razer Goliathus XL 
CPUMotherboardGraphicsRAM
i7 920 c0 @ 4.2 Ghz w/ 1.4v max 4.6ghz @1.55v w... Asus P6T6 WS Revolution w/ koolance nb/sb+mosfe... EVGA GTX 480 x3 w/ Koolance Vid-NX480 12gb Corsair Dominator 1600mhz w/ MIPS Ramcooler 6 
Hard DriveOptical DriveCoolingOS
1.5 Tb Seagate barracuda x3 LG Bluray Burner 2x SR1 360, RX 360, SR1 240, SR1 120, 2x MCP355... Win 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung t260 x3 Razer Black Widow Ultimate Silverstone st1200 Mountain Mods U2UFO w/ MM Pedestal Addition 
MouseMouse PadAudioAudio
Razer Mamba Razer Destructor X-Fi Fata1ity Logitech Z-5500 
CPUGraphicsRAMHard Drive
i7 3840QM 650ti 8GB 1333mhz DDR3 256gb ssd 
OSMonitorPowerCase
OSX Mountain Lion Retina Display 85w Magsafe Power Adapter Aluminum Unibody 
  hide details  
Reply
post #349 of 1486
dam, this is one of the craziest, overkills i have ever seen, hats off to you man

wish my family could support a habbit like that
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
post #350 of 1486
Quote:
Originally Posted by fat_italian_stallion View Post
Thanks for the input. I'd have to go with the VL3N since the threaded VL4N fittings are G3/8 instead of G1/4.

Thanks for the input SWC. Nice progress on ur build btw, get her finished! Don't hold ur breathe for the completion of this build. 6 months will be a conservative estimate.
Sounds good, I've liked my 3N's.
Quote:
Originally Posted by fat_italian_stallion View Post
Edit: I've been considering SSDs for this build, but I do not want to use a traditional Sata SSD since it would look ugly having to use the 2.5" to 3.5" adapter so I'll be going with a PCIE SSD such as the OCZ Revo X. Not sure what size I'll be getting or how many, but I'm willing to sacrifice a little bandwidth to my gpus for one or 3.

Comments, suggestions, and ideas are always welcome and appreciated.
What about the 6:1 Thermaltake SSD adapters like ShtSh00tr is using? I think those look really slick...
AC Mk-800 Cobra
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k ASUS P8P67 WS Revolution Zotac GTX 570 Corsair Vengeance 2x4GB 1600MHz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD WD Red WD AV-GP Samsung CD/DVD Combo 
OSMonitorMonitorKeyboard
Win-7 Pro x64 HP LP3065 30" 2560x1600 Dell 1600x1200 Portrait Monoprice Gaming Keyboard w/ MX Blacks 
PowerCaseMouseAudio
Corsair HX850 Modified Corsair Obsidian 800D Logitech G700 X-Fi Titanium PCIe 
Other
Happauge 2250 Tuner Card 
  hide details  
Reply
AC Mk-800 Cobra
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k ASUS P8P67 WS Revolution Zotac GTX 570 Corsair Vengeance 2x4GB 1600MHz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD WD Red WD AV-GP Samsung CD/DVD Combo 
OSMonitorMonitorKeyboard
Win-7 Pro x64 HP LP3065 30" 2560x1600 Dell 1600x1200 Portrait Monoprice Gaming Keyboard w/ MX Blacks 
PowerCaseMouseAudio
Corsair HX850 Modified Corsair Obsidian 800D Logitech G700 X-Fi Titanium PCIe 
Other
Happauge 2250 Tuner Card 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Work log] Project Liquid Death