Overclock.net › Forums › Cooling › Water Cooling › What temps should I be getting ?
New Posts  All Forums:Forum Nav:

What temps should I be getting ?

post #1 of 8
Thread Starter 
I have 2 xspc 360 rads, one for gpus, one for cpu. The rads have 3 ap-15's each.

Currently I am getting between 69-73 c max on cpu load, and 46 c on gpu load.

I still may have some air bubbles in my system after I drained everything to change a fitting yesterday.
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
post #2 of 8
What were your temperatures before you changed your fitting?
Neutrality
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 4670K @ 4.5 Gigabyte GA-Z87X-UD4H MSI 290X Gaming 2x4GB Samsung 1.35v Low Profile 
Hard DriveCoolingOSMonitor
2x OZC Arc 100 240GB, 2x Western Digital Caviar... EK Supremacy EVO + EK Thermosphere + Alphacool ... Windows 10 24" Asus VG248QE 144hz 
KeyboardPowerCaseMouse
CM Quickfire Pro MX Black EVGA 1050GS Modified HAF 932 Zowie FK1 
AudioAudio
Audio Technica AD700 Creative Sound Blaster X-Fi Titanium HD 
  hide details  
Reply
Neutrality
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 4670K @ 4.5 Gigabyte GA-Z87X-UD4H MSI 290X Gaming 2x4GB Samsung 1.35v Low Profile 
Hard DriveCoolingOSMonitor
2x OZC Arc 100 240GB, 2x Western Digital Caviar... EK Supremacy EVO + EK Thermosphere + Alphacool ... Windows 10 24" Asus VG248QE 144hz 
KeyboardPowerCaseMouse
CM Quickfire Pro MX Black EVGA 1050GS Modified HAF 932 Zowie FK1 
AudioAudio
Audio Technica AD700 Creative Sound Blaster X-Fi Titanium HD 
  hide details  
Reply
post #3 of 8
Thread Starter 
Quote:
Originally Posted by Buska103 View Post
What were your temperatures before you changed your fitting?
I didnt have AP-15's on before then so I have no idea.

I was running AP-30's (2 each rad) @ 7v before, and was getting about 3c lower.
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
post #4 of 8
Thread Starter 
Just ran my computer upside down and on its side for 4 hours each. All the air is completely out, however temps didn't change at all.

/sigh

I think air cooling gets similar CPU temps.
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
post #5 of 8
I would re-seat the CPU. Those temps are way too high. with my SB chip, even pusing 1.4v or so I didn't hit over 60c at 25c room temperature with an inferior waterblock. The GPU temps seem perfectly normal.

Also, you should check your water's temperature in each loop, just dangle a thermometer into your reservoir to take a reading. That'll tell you if it's that your loop can't keep up or if it's your mounting.
post #6 of 8
2x360 rads and good fans

I'm gonna go with too much TIM. You did not specify the TIM situation.

That was my problem initially. I was up 75c .. cleaned all that **** off and used half the size of a pea (very small dab) in the center. Now at 62c at 27c ambient 4gz and roughly the same voltage you have (i forget exact)
stable again
(25 items)
 
  
CPUCPUMotherboardGraphics
E5-2687W E5-2687W ASUS Z9PED8-WS EVGA GTX 570 (Linux host) 
GraphicsRAMHard DriveHard Drive
EVGA GTX 970 FTW (win7 guest) 64GB G.SKILL 2133 2x Crucial M4 256GB raid1 4x 3TB raid 10 
CoolingCoolingCoolingCooling
2x Apogee HD  2x RX 480 2x MCP 655 RP-452x2 rev2 (new) 
CoolingCoolingOSOS
16x Cougar Turbine CFT12SB4 (new) EK FC 580 Gentoo (host) Gentoo (x23 guests) 
OSMonitorMonitorPower
windows 7 (guest w/ vfio-pci) Viewsonic 23" 1080P Viewsonic 19" Antec HCP Platinum 1000 (new) 
CaseOtherOther
Case Labs TH10 (still the best ever) 2x Lamptron FC-5 IOGEAR 2 way DVI KVM Switch 
  hide details  
Reply
stable again
(25 items)
 
  
CPUCPUMotherboardGraphics
E5-2687W E5-2687W ASUS Z9PED8-WS EVGA GTX 570 (Linux host) 
GraphicsRAMHard DriveHard Drive
EVGA GTX 970 FTW (win7 guest) 64GB G.SKILL 2133 2x Crucial M4 256GB raid1 4x 3TB raid 10 
CoolingCoolingCoolingCooling
2x Apogee HD  2x RX 480 2x MCP 655 RP-452x2 rev2 (new) 
CoolingCoolingOSOS
16x Cougar Turbine CFT12SB4 (new) EK FC 580 Gentoo (host) Gentoo (x23 guests) 
OSMonitorMonitorPower
windows 7 (guest w/ vfio-pci) Viewsonic 23" 1080P Viewsonic 19" Antec HCP Platinum 1000 (new) 
CaseOtherOther
Case Labs TH10 (still the best ever) 2x Lamptron FC-5 IOGEAR 2 way DVI KVM Switch 
  hide details  
Reply
post #7 of 8
On my rs360 i get around 46C while folding with my fans on full with my i5@4.2GHz
BLU
(13 items)
 
  
CPUMotherboardGraphicsRAM
fx-8120 990FXA-UD5 Dual Gigabyte GTX560 Ti  G.Skill Ripjaws X 1600MHz CL8 8Gb 
Hard DriveOSMonitorPower
120gb OCZ Vertex 2, 1 + 2 Tb WD Green Windows 7 Pro Samsung 2233SW 21.5" + 2233 21.5" + ASUS 20" Corsair HX-750 
Case
Custom server case 
  hide details  
Reply
BLU
(13 items)
 
  
CPUMotherboardGraphicsRAM
fx-8120 990FXA-UD5 Dual Gigabyte GTX560 Ti  G.Skill Ripjaws X 1600MHz CL8 8Gb 
Hard DriveOSMonitorPower
120gb OCZ Vertex 2, 1 + 2 Tb WD Green Windows 7 Pro Samsung 2233SW 21.5" + 2233 21.5" + ASUS 20" Corsair HX-750 
Case
Custom server case 
  hide details  
Reply
post #8 of 8
Thread Starter 
Thanks everyone.

I have MX3 on the cpu atm, I don't think I put that much on but I will check.

I will do a reseat in a few days after I do some Lapping !
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500k ASUS P8P67 WS Revolution 2 x Asus GTX470 900/1800/1700 Corsair Vengence 8gb 
Hard DriveOSMonitorPower
120gb ssd, 4 x 1TB F3's Raid 0, 2TB F4 Backup Windows 7 Catleap 27 1440p Enermax Revolution 1050w 
Case
Case Labs M8 with pedestal  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › What temps should I be getting ?