Overclock.net › Forums › Cooling › Air Cooling › Asus P8P67 i5 2500k overheat
New Posts  All Forums:Forum Nav:

Asus P8P67 i5 2500k overheat - Page 2

post #11 of 24
Try a reseat.
     
CPUMotherboardGraphicsRAM
Intel Core i7-4870HQ @ 2.5 GHz (Turbo @ 3.7 GHz) Apple Logic Board Nvidia GeForce GT 750M 2GB 16 GB 1600 MHz DDR3 
Hard DriveOSMonitorKeyboard
APPLE SSD SM0512F 500GB macOS Sierra 15" Retina Display (2880 x 1800) Full-size backlit keyboard with 78 (U.S.) keys 
PowerCaseMouseAudio
85W Magsafe 2 Precision Aluminum Unibody Multi-Touch Trackpad Focusrite Scarlett 2i4 2nd Gen 
CPUGraphicsRAMHard Drive
Intel Core i5-3317U @ 1.7GHz (Turbo @ 2.6 GHz) Intel HD Graphics 4000 4 GB 1600 MHz DDR3L SDRAM APPLE SSD TS128E 
OSMonitorKeyboardPower
macOS Sierra 11.6" LCD/LED Backlit IPS Display (1366 x 768) Full-size backlit keyboard with 78 (U.S.) keys 85W Magsafe 2 
CaseMouse
Precision Aluminum Unibody Multi-Touch Trackpad 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i7-4870HQ @ 2.5 GHz (Turbo @ 3.7 GHz) Apple Logic Board Nvidia GeForce GT 750M 2GB 16 GB 1600 MHz DDR3 
Hard DriveOSMonitorKeyboard
APPLE SSD SM0512F 500GB macOS Sierra 15" Retina Display (2880 x 1800) Full-size backlit keyboard with 78 (U.S.) keys 
PowerCaseMouseAudio
85W Magsafe 2 Precision Aluminum Unibody Multi-Touch Trackpad Focusrite Scarlett 2i4 2nd Gen 
CPUGraphicsRAMHard Drive
Intel Core i5-3317U @ 1.7GHz (Turbo @ 2.6 GHz) Intel HD Graphics 4000 4 GB 1600 MHz DDR3L SDRAM APPLE SSD TS128E 
OSMonitorKeyboardPower
macOS Sierra 11.6" LCD/LED Backlit IPS Display (1366 x 768) Full-size backlit keyboard with 78 (U.S.) keys 85W Magsafe 2 
CaseMouse
Precision Aluminum Unibody Multi-Touch Trackpad 
  hide details  
Reply
post #12 of 24
The only reason I'm not so quick to jump on the warped heatsink options is that you had high temps with the stock cooler as well. You said with the stock cooler your idled at 45 and hit 90's under load...at stock clocks.

Something is not right there.


I agree with Corky

Quote:
I am not sure if the 2500K is soldered to the IHS, or if it has thermal paste in between, but my guess is something went wrong at Intel at that point.
Either that or the MB is sending crazy volts to it. Did you check the VCORE at anytime during your tests? If you said you did and I missed, my bad.
Dark Moon (Ryzen)
(25 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 7 1700 (3.9GHz@1.344) ASRock Fatal1ty X370 Professional Gaming EVGA GeForce GTX 1080 Ti FTW3 16GB Corsair LPX (8GBx2) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX300 240GB Intel 330 1TB Seagate 7200.12 Samsung BluRay 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 10 Pro 64bit Overlord Tempest X270OC - Glossy LG 34UM94 Ultrawide Monitor  
KeyboardPowerCaseMouse
Cooler Master MasterKeys Pro M w/Reds EVGA SuperNOVA 650 P2 Corsair C70 Logitech G502 
Mouse PadAudioAudioAudio
EVGA Gaming Surface Optimus Pro X77 Bookshelf Speakers Optimus Pro LX5 Fiio E10 DAC/Headphone Amp 
AudioAudioAudioAudio
Fiio E9K Amp SMSL SA-36A Pro AKG Q701 Sennheiser HD555 
Audio
Audio-Technica ATH-M50 
  hide details  
Reply
Dark Moon (Ryzen)
(25 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 7 1700 (3.9GHz@1.344) ASRock Fatal1ty X370 Professional Gaming EVGA GeForce GTX 1080 Ti FTW3 16GB Corsair LPX (8GBx2) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX300 240GB Intel 330 1TB Seagate 7200.12 Samsung BluRay 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 10 Pro 64bit Overlord Tempest X270OC - Glossy LG 34UM94 Ultrawide Monitor  
KeyboardPowerCaseMouse
Cooler Master MasterKeys Pro M w/Reds EVGA SuperNOVA 650 P2 Corsair C70 Logitech G502 
Mouse PadAudioAudioAudio
EVGA Gaming Surface Optimus Pro X77 Bookshelf Speakers Optimus Pro LX5 Fiio E10 DAC/Headphone Amp 
AudioAudioAudioAudio
Fiio E9K Amp SMSL SA-36A Pro AKG Q701 Sennheiser HD555 
Audio
Audio-Technica ATH-M50 
  hide details  
Reply
post #13 of 24
Thread Starter 
OK, here we are. Less paste, stock heatsink back on. First pic shows CPUz and CoreTemp readings. After that, BIOS pics I took upon initial startup, after CMOS was cleared and default settings loaded. Shows 56C in that configuration.

Booting up, I'm seeing idle around 38-41C, which I still think is a little too hot, even for the stock heatsink. I also ran Prime95 for a few minutes and observed the temps getting into the upper 80's and holding steady before I stopped it. So, that's better than before on the load side, at least. Makes me think I just had too much paste applied originally.

I've also ordered some Arctic Silver that should be here any day. I believe I'm going to exchange the CPU on the pretense it still might have an issue, wait patiently for the aftermarket cooler to arrive, and use the new paste. If I have any further issues, I'll be back. You guys have been great!



Email Checker
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k Asus P8P67 Pro Asus GTS450 Patriot DDR3 1600MHz 
OSPowerCase
Win 7 x64 CM 700W CM 690II Advanced 
  hide details  
Reply
Email Checker
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k Asus P8P67 Pro Asus GTS450 Patriot DDR3 1600MHz 
OSPowerCase
Win 7 x64 CM 700W CM 690II Advanced 
  hide details  
Reply
post #14 of 24
103 is the default BaseClock for your Asus Motherboard?

Those load temps still look too high for a 32nm chip at stock speed.

good luck with a new chip, hopefully you get a normal one.
PowerTrippin@home
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 @ 4.2Ghz 495x8.5@1.39v Gigabyte EP45-UD3P F9 Sapphire Radeon HD 6870 1GB BFG GTX 275 PhysX Corsair Dominators 2x2GB 
Hard DriveOptical DriveCoolingOS
Kingston V Series SSD 64 GB Spinpoint F3 1TB Blu-Ray drive & CD/DVD burner Scythe Mugen II 120mm Ultra Kaze 64bit Windows 7 
MonitorKeyboardPowerCase
Samsung 23" LED 1920x1080 [SyncMaster BX2331] Dell SK-8110 Corsair TX-750 V2 HAF 922 [inside painted black] 
MouseMouse Pad
Logitech Laser G500 Razer Vespula 
  hide details  
Reply
PowerTrippin@home
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 @ 4.2Ghz 495x8.5@1.39v Gigabyte EP45-UD3P F9 Sapphire Radeon HD 6870 1GB BFG GTX 275 PhysX Corsair Dominators 2x2GB 
Hard DriveOptical DriveCoolingOS
Kingston V Series SSD 64 GB Spinpoint F3 1TB Blu-Ray drive & CD/DVD burner Scythe Mugen II 120mm Ultra Kaze 64bit Windows 7 
MonitorKeyboardPowerCase
Samsung 23" LED 1920x1080 [SyncMaster BX2331] Dell SK-8110 Corsair TX-750 V2 HAF 922 [inside painted black] 
MouseMouse Pad
Logitech Laser G500 Razer Vespula 
  hide details  
Reply
post #15 of 24
Since this is sorta pointed towards me i'll help, 1st what is your ambient temperature because i OCed my 2500k on a P8P67 to 4.3Ghz on the stock cooler but i couldn't run Prime95 for more then 5min because it would heat up to 72C+ so make sure your cooler is connected properly to the board (Watch some videos on youtube if you dont know how) and only use a rice size of thermal past on the CPU also reset your bios to default and then see how it goes, also make sure your CPU voltage isn't too high.

Install your mobos drivers so have the AI Suite the P8P67 boards use you can ramp up your CPU fan and chassis fans from there.
post #16 of 24
whyd you smear that junk on the entire cpu!? LOL

look, all sandy bridge products run extremely hot. dont worry about brands of TIM, there is no TIM on the face of the planet that can fix your problem. you have pretty good temps as is, you should have not RMA'd it. i would actually get full refund and wait on BD
testbench#1
(13 items)
 
  
CPUMotherboardGraphicsRAM
PII X6 1090t MSI 790FX-GD70 EVGA GTX570 2x1gb Crucial + 2x2gb Kingston 
Hard DriveOptical DriveMonitorPower
2x Seagate Momentus XT 500gb Raid 0 Generic dvd-rw Samsung 27" Syncmaster P2770HD Ultra LSP 750w 
Case
white Corsair 600T 
  hide details  
Reply
testbench#1
(13 items)
 
  
CPUMotherboardGraphicsRAM
PII X6 1090t MSI 790FX-GD70 EVGA GTX570 2x1gb Crucial + 2x2gb Kingston 
Hard DriveOptical DriveMonitorPower
2x Seagate Momentus XT 500gb Raid 0 Generic dvd-rw Samsung 27" Syncmaster P2770HD Ultra LSP 750w 
Case
white Corsair 600T 
  hide details  
Reply
post #17 of 24
Quote:
Originally Posted by phillyb79 View Post
OK, here we are. Less paste, stock heatsink back on. First pic shows CPUz and CoreTemp readings. After that, BIOS pics I took upon initial startup, after CMOS was cleared and default settings loaded. Shows 56C in that configuration.

Booting up, I'm seeing idle around 38-41C, which I still think is a little too hot, even for the stock heatsink. I also ran Prime95 for a few minutes and observed the temps getting into the upper 80's and holding steady before I stopped it. So, that's better than before on the load side, at least. Makes me think I just had too much paste applied originally.

I've also ordered some Arctic Silver that should be here any day. I believe I'm going to exchange the CPU on the pretense it still might have an issue, wait patiently for the aftermarket cooler to arrive, and use the new paste. If I have any further issues, I'll be back. You guys have been great!
You need to change a few things to manual. Such as BCLK, vcore, and the multiplier. Your board is automatically overclocking and overvolting your chip.

Mine idles at 1600MHz, 0.88v. Yours should be doing the same or less volts. But its not, its sitting at 1.00v. Which tells me load voltage is higher than it needs to be too.
Junkyard
(18 items)
 
NAStradamous
(12 items)
 
HTPC01
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2320 @ 3.1GHz MSI B75MA-E33 HIS HD7970 3GB @ 1050 / 1700, 1.17v Patriot 2x4GB DDR3-1066 
Hard DriveHard DriveOptical DriveCooling
Crucial MX100 256GB WD Green 2TB DVDRW Corsair H50 Push / Pull 
CoolingOSMonitorMonitor
NZXT 120mm fans strapped to stock 7970 cooler Windows 10 Pro Dell 3007WFP Dell 2007FP 
MonitorKeyboardPowerCase
Dell 2007FP Cheap Toshiba (R.I.P. Ducky) PC Power & Cooling Silencer MKIII 950w Cheap Garbage (free) 
MouseAudio
Logitech G602 Yardsale Special 
CPUMotherboardGraphicsRAM
Intel Core i5 3330 Asus H61 MSI GTX 750Ti Low Profile 2x4GB Hynix DDR3-1333 
Hard DriveHard DriveOptical DriveCooling
60GB Kingston SSD 1TB Seagate Samsung DVDRW CoolerMaster Gemin II 
OSMonitorKeyboardPower
Windows 8.1 + Steam Big Picture / Plex HT 50" Insignia LED 1080p Logitech Rosewill Green 530w 
CaseMouseAudioOther
Silverstone HTPC Logitech Pioneer 2.0 tower speakers + 135w RMS Rosewill MCE Remote 
  hide details  
Reply
Junkyard
(18 items)
 
NAStradamous
(12 items)
 
HTPC01
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2320 @ 3.1GHz MSI B75MA-E33 HIS HD7970 3GB @ 1050 / 1700, 1.17v Patriot 2x4GB DDR3-1066 
Hard DriveHard DriveOptical DriveCooling
Crucial MX100 256GB WD Green 2TB DVDRW Corsair H50 Push / Pull 
CoolingOSMonitorMonitor
NZXT 120mm fans strapped to stock 7970 cooler Windows 10 Pro Dell 3007WFP Dell 2007FP 
MonitorKeyboardPowerCase
Dell 2007FP Cheap Toshiba (R.I.P. Ducky) PC Power & Cooling Silencer MKIII 950w Cheap Garbage (free) 
MouseAudio
Logitech G602 Yardsale Special 
CPUMotherboardGraphicsRAM
Intel Core i5 3330 Asus H61 MSI GTX 750Ti Low Profile 2x4GB Hynix DDR3-1333 
Hard DriveHard DriveOptical DriveCooling
60GB Kingston SSD 1TB Seagate Samsung DVDRW CoolerMaster Gemin II 
OSMonitorKeyboardPower
Windows 8.1 + Steam Big Picture / Plex HT 50" Insignia LED 1080p Logitech Rosewill Green 530w 
CaseMouseAudioOther
Silverstone HTPC Logitech Pioneer 2.0 tower speakers + 135w RMS Rosewill MCE Remote 
  hide details  
Reply
post #18 of 24
Quote:
Originally Posted by taystew View Post
whyd you smear that junk on the entire cpu!? LOL

look, all sandy bridge products run extremely hot. dont worry about brands of TIM, there is no TIM on the face of the planet that can fix your problem. you have pretty good temps as is, you should have not RMA'd it. i would actually get full refund and wait on BD
Dark Moon (Ryzen)
(25 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 7 1700 (3.9GHz@1.344) ASRock Fatal1ty X370 Professional Gaming EVGA GeForce GTX 1080 Ti FTW3 16GB Corsair LPX (8GBx2) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX300 240GB Intel 330 1TB Seagate 7200.12 Samsung BluRay 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 10 Pro 64bit Overlord Tempest X270OC - Glossy LG 34UM94 Ultrawide Monitor  
KeyboardPowerCaseMouse
Cooler Master MasterKeys Pro M w/Reds EVGA SuperNOVA 650 P2 Corsair C70 Logitech G502 
Mouse PadAudioAudioAudio
EVGA Gaming Surface Optimus Pro X77 Bookshelf Speakers Optimus Pro LX5 Fiio E10 DAC/Headphone Amp 
AudioAudioAudioAudio
Fiio E9K Amp SMSL SA-36A Pro AKG Q701 Sennheiser HD555 
Audio
Audio-Technica ATH-M50 
  hide details  
Reply
Dark Moon (Ryzen)
(25 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 7 1700 (3.9GHz@1.344) ASRock Fatal1ty X370 Professional Gaming EVGA GeForce GTX 1080 Ti FTW3 16GB Corsair LPX (8GBx2) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX300 240GB Intel 330 1TB Seagate 7200.12 Samsung BluRay 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 10 Pro 64bit Overlord Tempest X270OC - Glossy LG 34UM94 Ultrawide Monitor  
KeyboardPowerCaseMouse
Cooler Master MasterKeys Pro M w/Reds EVGA SuperNOVA 650 P2 Corsair C70 Logitech G502 
Mouse PadAudioAudioAudio
EVGA Gaming Surface Optimus Pro X77 Bookshelf Speakers Optimus Pro LX5 Fiio E10 DAC/Headphone Amp 
AudioAudioAudioAudio
Fiio E9K Amp SMSL SA-36A Pro AKG Q701 Sennheiser HD555 
Audio
Audio-Technica ATH-M50 
  hide details  
Reply
post #19 of 24
Quote:
Originally Posted by taystew View Post
whyd you smear that junk on the entire cpu!? LOL

look, all sandy bridge products run extremely hot. dont worry about brands of TIM, there is no TIM on the face of the planet that can fix your problem. you have pretty good temps as is, you should have not RMA'd it. i would actually get full refund and wait on BD




That right there is worth a negative Rep point
PowerTrippin@home
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 @ 4.2Ghz 495x8.5@1.39v Gigabyte EP45-UD3P F9 Sapphire Radeon HD 6870 1GB BFG GTX 275 PhysX Corsair Dominators 2x2GB 
Hard DriveOptical DriveCoolingOS
Kingston V Series SSD 64 GB Spinpoint F3 1TB Blu-Ray drive & CD/DVD burner Scythe Mugen II 120mm Ultra Kaze 64bit Windows 7 
MonitorKeyboardPowerCase
Samsung 23" LED 1920x1080 [SyncMaster BX2331] Dell SK-8110 Corsair TX-750 V2 HAF 922 [inside painted black] 
MouseMouse Pad
Logitech Laser G500 Razer Vespula 
  hide details  
Reply
PowerTrippin@home
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 @ 4.2Ghz 495x8.5@1.39v Gigabyte EP45-UD3P F9 Sapphire Radeon HD 6870 1GB BFG GTX 275 PhysX Corsair Dominators 2x2GB 
Hard DriveOptical DriveCoolingOS
Kingston V Series SSD 64 GB Spinpoint F3 1TB Blu-Ray drive & CD/DVD burner Scythe Mugen II 120mm Ultra Kaze 64bit Windows 7 
MonitorKeyboardPowerCase
Samsung 23" LED 1920x1080 [SyncMaster BX2331] Dell SK-8110 Corsair TX-750 V2 HAF 922 [inside painted black] 
MouseMouse Pad
Logitech Laser G500 Razer Vespula 
  hide details  
Reply
post #20 of 24
Quote:
Originally Posted by taystew View Post
whyd you smear that junk on the entire cpu!? LOL

look, all sandy bridge products run extremely hot. dont worry about brands of TIM, there is no TIM on the face of the planet that can fix your problem. you have pretty good temps as is, you should have not RMA'd it. i would actually get full refund and wait on BD
LOOOOOOL

Sandy Bridge runs extremely cool.
With a good cooler, I can go 5ghz+ and stay under 75*C
With your phenom you can give 1.55 volt and barely break 4.3 and go sky rocket temps.
And the junk on the CPU isn't the problem obvisouly, even a 7mm TIM wouldn't make those temps go as high.

I can't believe what you just said.
Like if Bulldozer will kill intel xD
Bulldozer will barely take on the current i7 familly, which is about to get more cores and speed with Ivy Bridge.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Asus P8P67 i5 2500k overheat