I was checking the voltages on my motherboard`s fan header with a digital multimeter and accidentaly i shorted the pins and caused a spark enough to blow it! I need to know if the transistor supplying the +12volts to the fan is still fine or what SMD compnent has been damaged? The traces on the board are still fine so if someone can tell me how to repair it i will be very grateful! the blown fan header is 4pin PWM type.
here is a screenshot of the blown fan header sys_fan2.
the header still reads the rpm speed but someone on other forums told me the mosfet transistor or the cap maybe be damaged and need to be replaced

Note: this is not a screenshot of my actual board (board is a gigabyte GA-EP45T-UD3P) i got it from google
here is a screenshot of the blown fan header sys_fan2.
the header still reads the rpm speed but someone on other forums told me the mosfet transistor or the cap maybe be damaged and need to be replaced

Note: this is not a screenshot of my actual board (board is a gigabyte GA-EP45T-UD3P) i got it from google





....heheheh
be like 


