Overclock.net › Forums › AMD › AMD - General › 1055t refuses to clock past 3.81ghz
New Posts  All Forums:Forum Nav:

1055t refuses to clock past 3.81ghz - Page 2

post #11 of 19
Stock voltage is 1.375, last I checked... can't really expect to go higher by lowering voltage. I can get mine to 3.8GHz with 1.375v, but then I need 1.43 to get to 4GHz. I don't remember the steps in between, but there ya go. Pump that thing with some voltage. Did a test early on in this build's life and I got to 4.2GHz with 1.45, but the temps were a bit high for comfort (and would burn my house down with current weather).
post #12 of 19
Thread Starter 
well, its not going any higher than 3.8ghz regardless of voltage. Heck, i even tried 1.5 volts. still failed to post. this was tried with a ram set that tops out at 1900mhz, and a hyper 212+
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #13 of 19
Thread Starter 
temps are at 32 deg idle for my current clock speed.pretty damn cool. AS5 TIM
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #14 of 19
Quote:
Originally Posted by R4Z0R View Post
temps are at 32 deg idle for my current clock speed.pretty damn cool. AS5 TIM
There are better TIMs than AS5 and most of them don't have the insane curing time or thermal conductivity
Herp
(1 item)
 
  
Other
Dolla Billz Yall! 
  hide details  
Reply
Herp
(1 item)
 
  
Other
Dolla Billz Yall! 
  hide details  
Reply
post #15 of 19
Thread Starter 
i know. but the best i could get my hands on was AS5.
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #16 of 19
Quote:
Originally Posted by R4Z0R View Post
i know. but the best i could get my hands on was AS5.
It's within 2 degrees of everything but it is such a pain. 200hr cure bleck. Also for everyone here, at a certain point you need to OC your NB to push that CPU any higher.
Herp
(1 item)
 
  
Other
Dolla Billz Yall! 
  hide details  
Reply
Herp
(1 item)
 
  
Other
Dolla Billz Yall! 
  hide details  
Reply
post #17 of 19
Thread Starter 
ohhh i see. LOL i didnt bother with nb oc'ing
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
X6 1055T Gigabyte 990FXA UD3 Gigabyte HD6850 Gigabyte HD6850 
RAMHard DriveOptical DriveCooling
Corsair Vengeance LP White Barracuda 7200RPM 1TB + Spinpoint F3 1TB in RAID 0 Samsung SATA DVDRW Antec Kuhler 620 
CoolingCoolingCoolingOS
2x Bitfenix Spectre intake Gelid Wing 12 PL side panel 140mm Antec Twocool top exhaust Ubuntu 10.4 ,ArchLinux, Red Hat, Windows 7 
KeyboardPowerCaseMouse
Cheapo Microsoft KB Silverstone Strider Plus 750w Antec 100 Logitech MX518 
Mouse Pad
Cheap fabric and rubber mousepad. 
  hide details  
Reply
post #18 of 19
Default voltage is between 1.3-1.4V. 1.325 on mine. For 4Ghz I need 1.425-1.475V depending on the cooling (so if my cooler performs better/can run this chip cooler [i.e. new NH-D14 cooler], I can actually run lower voltage. It's a trend on Phenom II chips)

Of course all chips are different in requirements, but this is my advice.
post #19 of 19
got mine to 3.85 and kinda stuck there. could PROBABLY get a little more if i set and played with it for awhile. but havent had time really. im pretty satisfied where its at. Would like to have 4.0 stable when i get around to it just to say ive done it.
Twisted
(17 items)
 
Twisted HAF
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD Athlon X2 5200+ Asus M2N-SLI MSI HD2600 XT 512MB Kingston HyperX 
Hard DriveOptical DriveCoolingOS
Seagate 500 GB Asus  Cooler MAster Gemin II Windows Vista Business 32-bit 
MonitorKeyboardPowerCase
Panasonic 50" Plasma Remote Mouse App for iPhone & Android Coolmax 700 Watt  Cooler Master 360 
Mouse
Remote Mouse App for iPhone & Android 
  hide details  
Reply
Twisted
(17 items)
 
Twisted HAF
(13 items)
 
 
CPUMotherboardGraphicsRAM
AMD Athlon X2 5200+ Asus M2N-SLI MSI HD2600 XT 512MB Kingston HyperX 
Hard DriveOptical DriveCoolingOS
Seagate 500 GB Asus  Cooler MAster Gemin II Windows Vista Business 32-bit 
MonitorKeyboardPowerCase
Panasonic 50" Plasma Remote Mouse App for iPhone & Android Coolmax 700 Watt  Cooler Master 360 
Mouse
Remote Mouse App for iPhone & Android 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › 1055t refuses to clock past 3.81ghz