Overclock.net › Forums › Intel › Intel CPUs › Figure out what killed my i2500k(ASUS Bios bug)
New Posts  All Forums:Forum Nav:

Figure out what killed my i2500k(ASUS Bios bug) - Page 2

post #11 of 33
Thread Starter 
Quote:
Originally Posted by wupah View Post
I have a question then; what`s the benefit of using offset voltage? I usually just set the vcore manually to something and adjust as I see fit.

Ex: 1.32v BSOD, 1.33v BSOD 1.34v Fine, etc etc


edit: the asus p8p67 pro bios has been flaky for me in the past, had to rma a board because it was continually cycling through the languages at supersonic speeds.

And I din`t mean to emphasize that you killed it.

Mine is opposite, I'll bsod using manual voltages.
1.46v manual = bsod
1.46 offset = stability

Quote:
Originally Posted by Falkentyne View Post
Good catch.
It's frankly best NOT to use offsets in profiles, period.
I've seen my CPU profiles load the wrong settings, or load previous settings (like I choose a 5 ghz profile but the multiplier is 49 still) until I load the profile a second time. This will NEVER happen with manual vcore...the worst that will happen is either the current vcore will be set to the wrong multi, or the new vcore/voltages will use the previous multiplier...
See above
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
post #12 of 33
Anyone want to give me the "Offset Voltages for Dummies" real quickly since I have no idea what it is or how/why to use it..
post #13 of 33
Thread Starter 
Quote:
Originally Posted by grunion View Post
No
A bios bug killed it.



My stock voltage is 1.24v, for me to run 5ghz I need to set a +.105v offset.
1.24v + .105v = 1.34 with ultra llc gives me 1.46v.


I saved the profile, went my 5.4ghz profile and messed around a bit.
Came back and loaded my 5ghz profile and noticed the offset was now at .975
Quote:
Originally Posted by tats View Post
Anyone want to give me the "Offset Voltages for Dummies" real quickly since I have no idea what it is or how/why to use it..
What more do you need to know?
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
post #14 of 33
go to bios. go default. login to windows, run something intensive.

look at voltage. write it down or soemthing

go to bios. then set an offset voltage of + .010 then login to windows, etc. run prime or something and compare the voltages.

i run a -.010 offset to get about 1.25v.

also depends on llc, etc.

in the end, it's basic math
    
CPUMotherboardGraphicsRAM
2600k @ 4.5 1.25v Maximus Iv Extreme Unlocked 6950 @ 976gpu Ridgeback 6-8-6-20-1T @1600Mhz 
Hard DriveOSMonitorPower
C300 64GB + 320GB WD +1TB Blacks Windows 7 64bit Samsung 2343BWX (2048x1152) OCZ ElitexStream 800w 
CaseMouse
Lian Li V2000 G9 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2600k @ 4.5 1.25v Maximus Iv Extreme Unlocked 6950 @ 976gpu Ridgeback 6-8-6-20-1T @1600Mhz 
Hard DriveOSMonitorPower
C300 64GB + 320GB WD +1TB Blacks Windows 7 64bit Samsung 2343BWX (2048x1152) OCZ ElitexStream 800w 
CaseMouse
Lian Li V2000 G9 
  hide details  
Reply
post #15 of 33
So it is the same as adding a manual voltage? Or does it only add the voltage under load? Just wondering what the benefit or use is then.
post #16 of 33
Thread Starter 
Quote:
Originally Posted by Kick View Post
go to bios. go default. login to windows, run something intensive.

look at voltage. write it down or soemthing

go to bios. then set an offset voltage of + .010 then login to windows, etc. run prime or something and compare the voltages.

i run a -.010 offset to get about 1.25v.

also depends on llc, etc.

in the end, it's basic math
That's my offset to run 4.5.
What llc level do you use?
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
post #17 of 33
Thats a good thing that you found this bug. This is really nice OCN community work!
It can prevent others to kill theire chip.
Sad is that you had to learn it the hard way.
I`m glad that you got a new RMA`d chip
Invisible rep+ for you!
/* Redemption*/
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7 3930K Asus Sabertooth Asus GTX 680 8x4GB G.Skill@1337MHz 
Hard DriveOptical DriveCoolingOS
2xM4 64GB/ / F3 - 1TB / 2x2TB Baracudas some LG Modified EK 360 HFX 2x(Win7 x64) 
MonitorKeyboardPowerCase
SyncMaster P2770HD and SyncMaster 940NW Roccat Isku Corsair Gold AX750 NZXT 810 Switch 
MouseMouse Pad
Rocat Kone[+] Razer exactmat X 
  hide details  
Reply
/* Redemption*/
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7 3930K Asus Sabertooth Asus GTX 680 8x4GB G.Skill@1337MHz 
Hard DriveOptical DriveCoolingOS
2xM4 64GB/ / F3 - 1TB / 2x2TB Baracudas some LG Modified EK 360 HFX 2x(Win7 x64) 
MonitorKeyboardPowerCase
SyncMaster P2770HD and SyncMaster 940NW Roccat Isku Corsair Gold AX750 NZXT 810 Switch 
MouseMouse Pad
Rocat Kone[+] Razer exactmat X 
  hide details  
Reply
post #18 of 33
im surprised ultra llc for you is such a huge jump in voltage. How I have my deluxe set up it just stays +/- .01v
    
CPUMotherboardGraphicsRAM
5960x @ 4.4ghz (1.19v) evga x99 micro2 (2) evga gtx 980 ti hybrid 32gb hyperx 2666mhz 
Hard DriveCoolingOSMonitor
samsung 950 pro 512gb NVMe M.2 ssd ek everything win 10 xl2430t / u2515h (x2) / u2913wm 
KeyboardPowerCaseMouse
cm novatouch w/ pbt caps. evga 1200 p2 lian li pc-9f nixeus revel 
Mouse PadAudioOther
steelseries qck heavy gustard U12/X12 -> H10/Lyr presonus 22vsl > mxl770 (mic) 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
5960x @ 4.4ghz (1.19v) evga x99 micro2 (2) evga gtx 980 ti hybrid 32gb hyperx 2666mhz 
Hard DriveCoolingOSMonitor
samsung 950 pro 512gb NVMe M.2 ssd ek everything win 10 xl2430t / u2515h (x2) / u2913wm 
KeyboardPowerCaseMouse
cm novatouch w/ pbt caps. evga 1200 p2 lian li pc-9f nixeus revel 
Mouse PadAudioOther
steelseries qck heavy gustard U12/X12 -> H10/Lyr presonus 22vsl > mxl770 (mic) 
  hide details  
Reply
post #19 of 33
glad i saw this.. i use offset and profiles.
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5g @ 1.4 Maximus IV evga 580 x2 XMS 
Hard DrivePowerCase
intel 510 AX850 Corsair 650D 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5g @ 1.4 Maximus IV evga 580 x2 XMS 
Hard DrivePowerCase
intel 510 AX850 Corsair 650D 
  hide details  
Reply
post #20 of 33
Is there a benefit to using offset as opposed to straight manual volts?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Figure out what killed my i2500k(ASUS Bios bug)