Bought my maximus board etc yesterday
Having same issue on the led : errorcode A2 (IDE Select)
Now moved my SSD connector to AHCI support lane
and my drive to the standard IDE lane
they are also on diff cables, no master slave
Do I have to set anything else on the drive/SSD to make them work?
or also first try to just clear the CMOS with battery removal?
ps: I found out that it rlly stops at the Sata lanes,, removing them just makes it stop at A1 (detecting devices)
pss: I do not hear any beeps on first startup, however my manual says I should hear some within first 30sec and if not maybe crashed on POST
psss: turning on the pc with the powerbutton itself makes my graphics card run at 100% fanspeed
doing so with the start button on the board doesn't, (radeon 6990, man its like a vacuumcleaner!)
Edited by darkzippy - 5/14/11 at 11:36pm