Overclock.net › Forums › Intel › Intel CPUs › First successful OC question
New Posts  All Forums:Forum Nav:

First successful OC question

post #1 of 8
Thread Starter 
So last night I was trying to OC my sig rig and after quite a bit of messing around I stayed at 166 x 22 for a 3.66GHz clock. cpuz is below. At the 166 bus speed, I can match my ram speed at 1333MHz.



However my question is, whenever I try to go higher, it is difficult to match my ram speeds. I only have a x6, x8, and x10 multiplier for my ram. i tried the x6 at 222MHz which will allow me to stay at 1333MHz for my ram speed. But when i test it my computer crashes, i tried upping the voltage to as much as 1.3v but still no go. any suggestions as to what I should do? I want to try and get over 3.66GHz for my cpu but to also match my ram speeds is slightly difficult. and if I am a little under because I also tried 200-210MHz bus speeds it causes my ram to be less than 1333mhz, prime95 detects unstable OC.
Any suggestions as to what I can do?
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
post #2 of 8
Give the RAM a bump to the volt's to handle the higher frequency.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #3 of 8
Thread Starter 
but my ram's speed is stated 1333mhz, shouldn't i keep it below that though?
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
post #4 of 8
Quote:
Originally Posted by chinesethunda View Post
but my ram's speed is stated 1333mhz, shouldn't i keep it below that though?
Well set the RAM multi as low as possible then clock the CPU and then adjust your RAM when the CPU is clocked to were you want it. If your RAM get's up to say 1400 mhz and crashes, give it more volt's till it's stable.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #5 of 8
Thread Starter 
so try and get to a higher speed and oc the ram too?
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
post #6 of 8
Quote:
Originally Posted by chinesethunda View Post
so try and get to a higher speed and oc the ram too?
Just set the RAM to as slow as possible. Then focus on the CPU and get it as high as you can. Then go back and adjust the RAM after the CPU is done.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #7 of 8
Thread Starter 
okay, should I try and aim for the 1333 mark or lower speeds because i have noticed prime95 always telling me its unstable at other ram speeds
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
   
Spare Rigs
(13 items)
 
CPUMotherboardGraphicsRAM
core 2 duo P8700@2.53GHz 2242CTO Intel X4500MHD 4gb 
Hard DriveOptical DriveOSMonitor
fujitsu 320gb dvd rom cd/rw Windows 7 Professional x64 15.4" 
PowerCaseMouse
Panasonic 6-cell + 65W AC adapter lenovo t500 Logitech MX518 
CPUMotherboardGraphicsRAM
Intel i5 760 evga p55 sli MSI gtx460 Hawk corsair dominator 
Hard DriveCoolingOSMonitor
kingston ssdnow hyper 212+ windows 7 professional sam syncmaster 
MonitorKeyboardPowerCase
Acer Razer Blackwidow ocz 650W coolermaster elite 335 
Mouse
Logitech MX518 
  hide details  
Reply
post #8 of 8
Quote:
Originally Posted by chinesethunda View Post
okay, should I try and aim for the 1333 mark or lower speeds because i have noticed prime95 always telling me its unstable at other ram speeds
Yes, set it as low as possible for now and work on the CPU.
If you ask the same question again I am out of here, lol.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › First successful OC question