Overclock.net › Forums › Intel › Intel - General › Problem after getting a new enclosure
New Posts  All Forums:Forum Nav:

Problem after getting a new enclosure

post #1 of 3
Thread Starter 
I just purchased an Antec Nine Hundred Two V3 case today and have had a hell of a time getting everything in order to run my computer again.

I've never really built a computer before, the most experience I have is upgrading my GPU.


I booted my computer after getting everything hooked up and it loaded into Windows just fine until I went ahead and plugged my Mic and Headphones into the front I/O jacks. As soon as I did that the computer rebooted into a loop. I immediately shut the computer off, unplugged the headset and tried to start the computer again without success. The computer boots up and power is sustained, but I don't get any further than that. There is no signal, it seems, to my monitor from my video card (Nvidia GTX285) as nothing comes up on the monitor so I can't even tell if windows is loading.


Does anyone have some insight into how I can fix this or what happened? Is my computer now fried and unusable? It booted properly before I connected my headset.

Here's my hardware:
intel DQ965GF
Corsair hx650w PSU
Nvidia GTX285
post #2 of 3
What is your motherboard ?
FreeLance Gamer
(18 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k Asus P8P67-Pro Inno3D GTX670 Corsair Vengance  
Hard DriveHard DriveHard DriveOptical Drive
SSD Crucial WD 7200 rpm WD x24 ODD 
CoolingOSMonitorMonitor
Corsair H80 Window 7 ultimate Samsung B2440 Samsung B2440 
MonitorKeyboardPowerCase
Samsung B2440 Razor Black Widow Ultimate Corsair HX-750W Cosmos Pure 
MouseAudio
G700 x-fi Titanium fatality 
  hide details  
Reply
FreeLance Gamer
(18 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k Asus P8P67-Pro Inno3D GTX670 Corsair Vengance  
Hard DriveHard DriveHard DriveOptical Drive
SSD Crucial WD 7200 rpm WD x24 ODD 
CoolingOSMonitorMonitor
Corsair H80 Window 7 ultimate Samsung B2440 Samsung B2440 
MonitorKeyboardPowerCase
Samsung B2440 Razor Black Widow Ultimate Corsair HX-750W Cosmos Pure 
MouseAudio
G700 x-fi Titanium fatality 
  hide details  
Reply
post #3 of 3
Thread Starter 
As far as I can tell it's the Intel DQ965GF according to what's on the mobo layout sticker schematic.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Problem after getting a new enclosure