Originally Posted by CartmanTheTub
well the front rad is going to be inside the case. idk why i didnt draw it that way. I tho having fans on the rad are a given so I didnt draw them either. If I do this set up. I will be using hot air to cool the top rad. wouldnt that be bad? I was thinking of using the rear fan as intake to, to bring in "fresh" air
Are your GPU's to be included in this WC loop? If not, the heat exhausted out the rear of these cards will get sucked into the case by the rear case fan if you orient that as an intake.
If the GPU's are included in the WC loop, it shouldn't be much of an issue as you'll be introducing fresh air from the back and bottom of the case (assuming that is an intake as well) which should help mitigate the warm air that comes from the front mounted rad. It won't be ideal, but it will be much better than if you had the front rad as your only intake.
Play around with your fan configurations to see what yields the best loop temps, a little trial and error never hurts in this scenario