Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 197

post #1961 of 9343
Quote:
Originally Posted by Stileth View Post
So these are your settings for stable 4.8Ghz? What are your temperatures?
I don't know whether or not it's stable; I haven't even tested it yet (which is why I said "I am not finished testing" and "but I have not yet tested 0.030V").

However, the max temps with the little bit of temporary (quick) testing that I've done already are similar to before: about 70°C.


Quote:
Originally Posted by Durden View Post
Id say its warm at the moment. I may have something at work that i can borrow to just give me an idea hopefully.

I applied about a pea sized tim to the middle of the processof and put alot of pressure. I may try your suggestion of bringing the case out from behind the tv to see if theres any comparable difference.
Then it may also be that there's not enough. Sometimes a pea-sized blob is not enough because it's very easy to use something much smaller than the size of an actual pea due to the small size and surface area of the CPU.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #1962 of 9343
Quote:
Originally Posted by TwoCables View Post
I don't know whether or not it's stable; I haven't even tested it yet (which is why I said "I am not finished testing" and "but I have not yet tested 0.030V").

However, the max temps with the little bit of temporary (quick) testing that I've done already are similar to before: about 70°C.



Then it may also be that there's not enough. Sometimes a pea-sized blob is not enough because it's very easy to use something much smaller than the size of an actual pea due to the small size and surface area of the CPU.
I used this video for the application process and used around this much (the first attempt on there)

post #1963 of 9343
Hmm.. I have similar temperatures like turrican9 posted just I am only at 4.1Ghz and also I have used the pea size method. Now I am thinking to reseat the noctua with spreading the thermal compound with credit card to cover whole CPU.
Also I have used the one included with noctua, but I have also akasa-455 is it better or not?
i7 Beast
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K @3.8GHz ASUS P8P67 PRO B3 ASUS STRIX GAMING RX470 DirectCU II 4GB G.Skill Sniper DDR3 1600MHz 8GB 2x4GB CL9 
RAMHard DriveHard DriveHard Drive
Crucial Ballistix Sport 1600MHz 8GB 2x4GB CL9 Samsung Spinpoint F3 1GB Samsung 850 EVO 500GB TOSHIBA P300 3TB 
Optical DriveCoolingOSMonitor
LG GSA-H30N Noctua NH-D14 Window 10 Pro 24" ViewSonic XG2401 Black 
KeyboardPowerCaseMouse
Gigabyte Aivia K8100 Corsair AX750 Cooler Master Dominator CM-690 II Advanced A4tech Bloody V7 V-Track Core 2 
Mouse PadAudio
A4tech X7-300MP Creative 2.1 Speakers 
  hide details  
Reply
i7 Beast
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K @3.8GHz ASUS P8P67 PRO B3 ASUS STRIX GAMING RX470 DirectCU II 4GB G.Skill Sniper DDR3 1600MHz 8GB 2x4GB CL9 
RAMHard DriveHard DriveHard Drive
Crucial Ballistix Sport 1600MHz 8GB 2x4GB CL9 Samsung Spinpoint F3 1GB Samsung 850 EVO 500GB TOSHIBA P300 3TB 
Optical DriveCoolingOSMonitor
LG GSA-H30N Noctua NH-D14 Window 10 Pro 24" ViewSonic XG2401 Black 
KeyboardPowerCaseMouse
Gigabyte Aivia K8100 Corsair AX750 Cooler Master Dominator CM-690 II Advanced A4tech Bloody V7 V-Track Core 2 
Mouse PadAudio
A4tech X7-300MP Creative 2.1 Speakers 
  hide details  
Reply
post #1964 of 9343
One way which i've tried before in the past (for my ps3 repaires) was to use a plastic bag and finger technique although when reading the little i did with the application of TIM for a processor i thought it didnt need to be as spread.
post #1965 of 9343
Quote:
Originally Posted by Durden View Post
I used this video for the application process and used around this much (the first attempt on there)

http://www.youtube.com/watch?v=EyXLu1Ms-q4
What kind of paste did you use? I mean, I don't know what kind of paste they used that first time, but it looks to me like Arctic Silver needed about 1.5x as much just to spread as far as the "Silicon type".

So if you ever feel up to it (I know I wouldn't), then I recommend checking to see how far it spread just to see if it covered most of the CPU. If not, then you'll need more.

As for applying it fresh: just apply a good sized blob in the center and go for it. There's no need to get fancy. I've always had excellent and consistent results just putting a blob in the center, cranking down the heatsink, removing the heatsink to check the application, fixing if necessary, and then putting the heatsink on.
Edited by TwoCables - 7/17/11 at 3:17pm
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #1966 of 9343
My ambient temps probably hovered between the 21C - 24C range when running Blend in my little computer room. Computer warms up the room if I don't open the Window.

Also, keep in mind if using AS5, it is better to spread the paste using your finger (plastic bag) or a credit card. It has a very thick consistence and will not spread well using other methods.

Personally I have always been spreading the paste using my finger (No plastic bag), and have always had good/normal temps. I have very dry fingers, so would not recommend others doing it this way.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #1967 of 9343
Quote:
Originally Posted by TwoCables View Post
What kind of paste did you use? I mean, I don't know what kind of paste they used that first time, but it looks to me like Arctic Silver needed about 1.5x as much just to spread as far as the "Silicon type".

So if you ever feel up to it (I know I wouldn't), then I recommend checking to see how far it spread just to see if it covered most of the CPU. If not, then you'll need more.
Your going to get me checking it now lol

I used the stuff that came with the cooler. May do it tomorrow though as i'm nursing a really bad hangover and dont think i should be let near equipment just yet haha

Also will get a ambient temp first too as it could be performing great for all we know.
post #1968 of 9343
Quote:
Originally Posted by turrican9 View Post
My ambient temps probably hovered between the 21C - 24C range when running Blend in my little computer room. Computer warms up the room if I don't open the Window.

Also, keep in mind if using AS5, it is better to spread the paste using your finger (plastic bag) or a credit card. It has a very thick consistence and will not spread well using other methods.

Personally I have always been spreading the paste using my finger (No plastic bag), and have always had good/normal temps. I have very dry finger, so would not recommend others doing it this way.
I can def say thats what i've done in the past and everytime i've rechecked the paste its had good contact (finger method) though i thought i wouldnt get my hands dirty with this build
post #1969 of 9343
I thought that it's supposed to be unsafe to get thermal compound on our skin... Like, it might end up looking clean, but it still remains on a microscopic level or something.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #1970 of 9343
Quote:
Originally Posted by TwoCables View Post
I thought that it's supposed to be unsafe to get thermal compound on our skin... Like, it might end up looking clean, but it still remains on a microscopic level or something.
Well, I've been doing it for 15 years, and I'm still up and running
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>