Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 248

post #2471 of 9343
Quote:
Originally Posted by wermad View Post
Absolutely. It's even better than what I recommended because it's faster at basically the same timings!


Quote:
Originally Posted by wermad View Post
For benchmarks, I run 48x 1.355v, pll overvoltage enabled (stability or crashes), speedstep off.

When I game, I have it @ 45x w/ 1.315v, pll disabled, speedstep on.

Right now I'm running everything in auto and 40x w/ pll overvoltage in auto and my idle is in the low 200w range, if I disable it, it will jump 75-100w. At this setting, I have no issues w/ sleep.

edit: I'll get the one you suggested thanks again!
Well, I'm still curious to know what all of your settings are.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #2472 of 9343
Could it be, that my downclocking(turbo off) issues have to do with my memory setup ?

I am using this modules:
http://www.gskill.com/products.php?index=370

They are not listed on the ASUS QVL for this board, but the board is listed on the product page on the ram, so I was confident, that this would be a good match.

Is it possible, that my RAM voltage of 1,65V can cause such problems ? Furthermore this is a 2x4GB kit, which is less optimal than a 2x2GB kit for overclocking, I have heard.
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
post #2473 of 9343
I don't know about 2 x 4GB vs. 2 x 2GB, however I am indeed very curious about why they're claiming a 1.65V kit is designed for this.

For example, this is taken straight from the P8P67 EVO's manual:

"According to Intel spec, DIMM voltage below 1.65V is recommended to protect the CPU."
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #2474 of 9343
Quote:
Originally Posted by TwoCables View Post
Absolutely. It's even better than what I recommended because it's faster at basically the same timings!



Well, I'm still curious to know what all of your settings are.
@ 4.8+
By per core
Pll overrvoltage: enabled
LL calibration: ultra high
Phase and duty: extreme
speedstep: disabled
voltage: 1.355+
Everything else in auto.

I used the xs.org 2500k oc guide as a template for both my old 2500k and my new 2600k.

Im going to pickup the G.Skill ram, thanks again.
Edited by wermad - 7/26/11 at 12:40am
post #2475 of 9343
What is your VCCIO voltage right now? I just learned something that might help save you money.

Thanks to a recent post in another thread by pioneerisloud, I just learned that the DRAM Voltage and the VCCIO voltage should not be more than 0.50V apart from each other and that the default VCCIO voltage is 1.000V. So if your DRAM Voltage is 1.65V right now, then your VCCIO should be increased to at least 1.15000V, or perhaps even 1.15625V.
Edited by TwoCables - 7/26/11 at 1:15am
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #2476 of 9343
Quote:
Originally Posted by TwoCables View Post
I don't know about 2 x 4GB vs. 2 x 2GB, however I am indeed very curious about why they're claiming a 1.65V kit is designed for this.

For example, this is taken straight from the P8P67 EVO's manual:

"According to Intel spec, DIMM voltage below 1.65V is recommended to protect the CPU."
Exactly the same is printed in my P8Z68 Deluxe manual. But there actually is room for interpretation. 1,649V would also be below 1,65V and 1,65V would therefore only be 0,001V higher than a recommended setting

Ok, I should stop splitting hairs , I have heard and read very often, that 1,65V could lower OC potential and is the upper limit the cpu can cope with without taking damage over time.
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
post #2477 of 9343
Quote:
Originally Posted by slimex View Post
Exactly the same is printed in my P8Z68 Deluxe manual. But there actually is room for interpretation. 1,649V would also be below 1,65V and 1,65V would therefore only be 0,001V higher than a recommended setting

Ok, I should stop splitting hairs , I have heard and read very often, that 1,65V could lower OC potential and is the upper limit the cpu can cope with without taking damage over time.
Yeah, but thanks to a recent post in another thread by pioneerisloud, I just learned that the DRAM Voltage and the VCCIO voltage should not be more than 0.50V apart from each other and that the default VCCIO voltage is 1.000V. So if your DRAM Voltage is 1.65V right now, then your VCCIO should be increased to at least 1.15000V, or perhaps even 1.15625V.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #2478 of 9343
Quote:
Originally Posted by TwoCables View Post
Yeah, but thanks to a recent post in another thread by pioneerisloud, I just learned that the DRAM Voltage and the VCCIO voltage should not be more than 0.50V apart from each other and that the default VCCIO voltage is 1.000V. So if your DRAM Voltage is 1.65V right now, then your VCCIO should be increased to at least 1.15000V, or perhaps even 1.15625V.
Oh, thats interesting. My VCCIO Voltage is 1,15V right now, default value shown in uefi, while auto was set, was 1,05, could be that it was 1,047 or something like that.
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
post #2479 of 9343
Quote:
Originally Posted by slimex View Post
Oh, thats interesting. My VCCIO Voltage is 1,15V right now, default value shown in uefi, while auto was set, was 1,05, could be that it was 1,047 or something like that.
Ah ha. So then your wiggle room is between 1.15000V and 1.20000V. Increasing it up from 1.15V without exceeding 1.2V may help increase the stability and perhaps even allow you to use a lower core voltage.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #2480 of 9343
Quote:
Originally Posted by TwoCables View Post
Ah ha. So then your wiggle room is between 1.15000V and 1.20000V. Increasing it up from 1.15V without exceeding 1.2V may help increase the stability and perhaps even allow you to use a lower core voltage.
Ah, I should try this next time I test. Are the 1,2V suitable for 24/7 use ?
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>