Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 279

post #2781 of 9343
Yeah you had you DRAM Voltage way too high.

I have the same ram on the way here tomorrow with my new board and brand new i7. Can't wait.
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
post #2782 of 9343
Hmm I wonder if I bumped my DRAM volts a notch or 2 I could run my RAM at its rated specs of 2133. Says its rated for 1.50v @ 2133 but I was getting rounding errors in Prime so I stuck to 1600 for the time being.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz Asus P8P67 Pro EVGA SC GTX 570 G.SKILL Ripjaws X DDR3 2133 8GB [2 x 4GB] 
Hard DriveOSMonitorPower
Crucial M4 128gb, x2 WD6400AAKS Windows 7 Ultimate 64-Bit Samsung SyncMaster T240 Silverstone DA800 800w 
Case
Lian Li PC-A70B 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz Asus P8P67 Pro EVGA SC GTX 570 G.SKILL Ripjaws X DDR3 2133 8GB [2 x 4GB] 
Hard DriveOSMonitorPower
Crucial M4 128gb, x2 WD6400AAKS Windows 7 Ultimate 64-Bit Samsung SyncMaster T240 Silverstone DA800 800w 
Case
Lian Li PC-A70B 
  hide details  
Reply
post #2783 of 9343
Quote:
Originally Posted by orlywutlol View Post
Hmm I wonder if I bumped my DRAM volts a notch or 2 I could run my RAM at its rated specs of 2133. Says its rated for 1.50v @ 2133 but I was getting rounding errors in Prime so I stuck to 1600 for the time being.
Either that or VCCIO. Could have been your memory controller giving you the issues as well.
Junkyard
(18 items)
 
NAStradamous
(12 items)
 
HTPC01
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2320 @ 3.1GHz MSI B75MA-E33 HIS HD7970 3GB @ 1050 / 1700, 1.17v Patriot 2x4GB DDR3-1066 
Hard DriveHard DriveOptical DriveCooling
Crucial MX100 256GB WD Green 2TB DVDRW Corsair H50 Push / Pull 
CoolingOSMonitorMonitor
NZXT 120mm fans strapped to stock 7970 cooler Windows 10 Pro Dell 3007WFP Dell 2007FP 
MonitorKeyboardPowerCase
Dell 2007FP Cheap Toshiba (R.I.P. Ducky) PC Power & Cooling Silencer MKIII 950w Cheap Garbage (free) 
MouseAudio
Logitech G602 Yardsale Special 
CPUMotherboardGraphicsRAM
Intel Core i5 3330 Asus H61 MSI GTX 750Ti Low Profile 2x4GB Hynix DDR3-1333 
Hard DriveHard DriveOptical DriveCooling
60GB Kingston SSD 1TB Seagate Samsung DVDRW CoolerMaster Gemin II 
OSMonitorKeyboardPower
Windows 8.1 + Steam Big Picture / Plex HT 50" Insignia LED 1080p Logitech Rosewill Green 530w 
CaseMouseAudioOther
Silverstone HTPC Logitech Pioneer 2.0 tower speakers + 135w RMS Rosewill MCE Remote 
  hide details  
Reply
Junkyard
(18 items)
 
NAStradamous
(12 items)
 
HTPC01
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2320 @ 3.1GHz MSI B75MA-E33 HIS HD7970 3GB @ 1050 / 1700, 1.17v Patriot 2x4GB DDR3-1066 
Hard DriveHard DriveOptical DriveCooling
Crucial MX100 256GB WD Green 2TB DVDRW Corsair H50 Push / Pull 
CoolingOSMonitorMonitor
NZXT 120mm fans strapped to stock 7970 cooler Windows 10 Pro Dell 3007WFP Dell 2007FP 
MonitorKeyboardPowerCase
Dell 2007FP Cheap Toshiba (R.I.P. Ducky) PC Power & Cooling Silencer MKIII 950w Cheap Garbage (free) 
MouseAudio
Logitech G602 Yardsale Special 
CPUMotherboardGraphicsRAM
Intel Core i5 3330 Asus H61 MSI GTX 750Ti Low Profile 2x4GB Hynix DDR3-1333 
Hard DriveHard DriveOptical DriveCooling
60GB Kingston SSD 1TB Seagate Samsung DVDRW CoolerMaster Gemin II 
OSMonitorKeyboardPower
Windows 8.1 + Steam Big Picture / Plex HT 50" Insignia LED 1080p Logitech Rosewill Green 530w 
CaseMouseAudioOther
Silverstone HTPC Logitech Pioneer 2.0 tower speakers + 135w RMS Rosewill MCE Remote 
  hide details  
Reply
post #2784 of 9343
Thread Starter 
Quote:
Originally Posted by nawon72 View Post
I need to test a little more, but i think the culprit was the DRAM voltage. And of course i need to test the RAM for stability. Ill post again instead of updating when i get the new info.
Nice one!! try 8-9-8-27 with a small voltage bump, 1.55v
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #2785 of 9343
Quote:
Originally Posted by nawon72 View Post


I need to test a little more, but i think the culprit was the DRAM voltage. And of course i need to test the RAM for stability. Ill post again instead of updating when i get the new info.
Try 9-11-9-29-1T. It probably won't work, but that's what my 1866MHz uses for stock timings!
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #2786 of 9343
Quote:
Originally Posted by pioneerisloud View Post
Moar!!! Tighten them timings down, or up your speed to 2133.
Quote:
Originally Posted by munaim1 View Post
Nice one!! try 8-9-8-27 with a small voltage bump, 1.55v
Are you nuts Im already having major stability issues with this memory OC. My computer is randomly freezing(so i restart), and it took me 10min just to get this post typed out. So a realistic OC would be 1866MHz 9-11-9-28-2T @1.5V, but hopefully i can tweak it to get better timings.
Quote:
Originally Posted by TwoCables View Post
Try 9-11-9-29-1T. It probably won't work, but that's what my 1866MHz uses for stock timings!
Ill give it a shot, but with 2T to start out. But before i even do that, i want to see if i can get 2133MHz.

Right now I'm testing to see how high i can get my DRAM voltage(with XMP) before my OC fails.
Edited by nawon72 - 8/4/11 at 9:54pm
post #2787 of 9343
I like Intel Burn Test (IBT) better than prime 95. I will pass tests with flying colors on a relatively conservative OC with IBT, but then get a rounding error in prime95. Then just running my comp, running all my normal programs things are very stable. IBT also pushes the system a little harder too. Yet still can never get large FFTs to work in p95.

Are you raising fsb small increments at a time? If you are too aggressive you may get errors too.
Edited by dlerch - 8/4/11 at 10:39pm
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
post #2788 of 9343
Quote:
Originally Posted by dlerch View Post
I like Intel Burn Test (IBT) better than prime 95. I will pass tests with flying colors on a relatively conservative OC with IBT, but then get a rounding error in prime95. Then just running my comp, running all my normal programs. IBT also pushes the system a little harder too.
That means that Prime95 Blend is superior. Think about it.

....unless you're talking about the Core2 Quad.


Quote:
Originally Posted by dlerch View Post
Are you raising fsb small increments at a time? If you are too aggressive you may get errors too.
We don't have a FSB. We have a BCLK though, but it's better to leave it at 100.0 MHz.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #2789 of 9343
Tried setting my ram to 2133 again. Changed VCCIO to 1.15v and DRAM to 1.52v. Got a rounding error after 56min.

I'm thinking just staying with 1600 and try tighter timings.

Any other suggestions?
Edited by orlywutlol - 8/4/11 at 11:12pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz Asus P8P67 Pro EVGA SC GTX 570 G.SKILL Ripjaws X DDR3 2133 8GB [2 x 4GB] 
Hard DriveOSMonitorPower
Crucial M4 128gb, x2 WD6400AAKS Windows 7 Ultimate 64-Bit Samsung SyncMaster T240 Silverstone DA800 800w 
Case
Lian Li PC-A70B 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 4.6ghz Asus P8P67 Pro EVGA SC GTX 570 G.SKILL Ripjaws X DDR3 2133 8GB [2 x 4GB] 
Hard DriveOSMonitorPower
Crucial M4 128gb, x2 WD6400AAKS Windows 7 Ultimate 64-Bit Samsung SyncMaster T240 Silverstone DA800 800w 
Case
Lian Li PC-A70B 
  hide details  
Reply
post #2790 of 9343
Quote:
Originally Posted by TwoCables View Post
Try 9-11-9-29-1T. It probably won't work, but that's what my 1866MHz uses for stock timings!
What DRAM and VCCIO Voltage do you require for stability?

ATM, i can't even seem to get any stability with my memory OC. Even at 1866MHz 10-11-10-31-2T with 1.55V and 1.125VCCIO. So i need suggestions that don't involve increasing the DRAM voltage much more than 1.55V because it will instantly crash.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>