Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 308

post #3071 of 9343
Please add me to the list!

I'm a proud new owner of an Asus P8Z68 deluxe motherboard.

Thanks
Micma
Sandy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600k 4.8ghz Asus P8Z68 Deluxe 2x nVidia GTX280 Ripjaws X 4x4gb kit 2133mhz 11/11/11/30/2T 1.5v 
Hard DriveOptical DriveOSMonitor
2xCrucial M4 128gb Sata3 raid0, WD black 1TB Sata2 Standard DVD burner Windows 7 Ultimate 64gb NEC M-Sync LCD2690wuxi- Viewsonic VX924 
KeyboardPowerCaseMouse
Standard 104 + Zboard gaming Tt w00133ru 1200 watts Tt A60 Logitech G5 
  hide details  
Reply
Sandy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sandy Bridge 2600k 4.8ghz Asus P8Z68 Deluxe 2x nVidia GTX280 Ripjaws X 4x4gb kit 2133mhz 11/11/11/30/2T 1.5v 
Hard DriveOptical DriveOSMonitor
2xCrucial M4 128gb Sata3 raid0, WD black 1TB Sata2 Standard DVD burner Windows 7 Ultimate 64gb NEC M-Sync LCD2690wuxi- Viewsonic VX924 
KeyboardPowerCaseMouse
Standard 104 + Zboard gaming Tt w00133ru 1200 watts Tt A60 Logitech G5 
  hide details  
Reply
post #3072 of 9343
Add me, I have the ASUS P8Z68 Deluxe. Love the board. I have it running at 4430MHz with no problems.
Sys info
(13 items)
 
  
CPUMotherboardRAMHard Drive
I7 2600k Sandy Bridge 3.4Ghz@4430 Asus P8Z68 Deluxe 16 gigs G.Skill Ripjaws X Series WD Black 2TB In Raid 0 
Optical DriveOSMonitorKeyboard
Sony Blue ray win7 64 bit 2 Samsung 24" Logitech G15 
PowerCaseMouseMouse Pad
roswell 1200 watts coolermaster 830 evo Rat7 wow pad 
  hide details  
Reply
Sys info
(13 items)
 
  
CPUMotherboardRAMHard Drive
I7 2600k Sandy Bridge 3.4Ghz@4430 Asus P8Z68 Deluxe 16 gigs G.Skill Ripjaws X Series WD Black 2TB In Raid 0 
Optical DriveOSMonitorKeyboard
Sony Blue ray win7 64 bit 2 Samsung 24" Logitech G15 
PowerCaseMouseMouse Pad
roswell 1200 watts coolermaster 830 evo Rat7 wow pad 
  hide details  
Reply
post #3073 of 9343
So i've been trying to get my system stable (for the sandy bridge stable club) @ 4.6 ghz over the past few days. The first few times I ran Prime it would 124BSOD and I increased the cpu manual voltage. At 1.325v Prime ran for 2 hours and then 124bsod. I increased voltage to 1.335v and it ran for 10 hours and again 124bsod. Prime95 log shows no failures. I'm wondering if it has something to do w/ the PLL or VCCIO instead of CPU voltage. throughout all the testing PLL was set to 1.75v and VCCIO at 1.175? any input would be appreciated. Should I keep upping the vcore or try something else?

the rest of my settings are as follows:

Ai Tweaker

Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 46
Internal PLL Voltage: Disabled
Memory Frequency: DDR3-1333MHz
DRAM Timing Control: 8-8-8-24-2T
EPU Power Saving MODE: Disabled



Ai Tweaker\\ CPU Power Management >

CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Disabled
Turbo Mode: Enabled
Long Duration Power Limit: Auto
Long Duration Maintained: Auto
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto



Ai Tweaker (in the DIGI+ VRM section)

Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Manual Mode
CPU Manual Voltage: 1.335V
DRAM Voltage: 1.5000V
VCCSA Voltage: Auto
VCCIO Voltage: 1.1750V
CPU PLL Voltage: 1.750V
PCH Voltage: Auto
CPU Spread Spectrum: Disabled



Advanced\\ CPU Configuration >

CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Disabled
Turbo Mode: Enabled
CPU C1E: Disabled
CPU C3 Report: Auto
CPU C6 Report: Enabled

__________________
Sinister
(13 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k @ 4.6ghz 1.335v] [Asus P8Z68-V Pro] [R6950 Unlocked Shaders] [8gb Vengeance 1333 8-8-8-24] 
Hard DriveOSMonitorKeyboard
[WD 10k RPM Raptor] [Windows 7 Ultimate x64] [LG LED 23in] [Logitech G15] 
PowerCaseMouse
[Mushkin 550w] [Lian-Li PC60B] [Logitech G9x] 
  hide details  
Reply
Sinister
(13 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k @ 4.6ghz 1.335v] [Asus P8Z68-V Pro] [R6950 Unlocked Shaders] [8gb Vengeance 1333 8-8-8-24] 
Hard DriveOSMonitorKeyboard
[WD 10k RPM Raptor] [Windows 7 Ultimate x64] [LG LED 23in] [Logitech G15] 
PowerCaseMouse
[Mushkin 550w] [Lian-Li PC60B] [Logitech G9x] 
  hide details  
Reply
post #3074 of 9343
Running Prime95 1792 and 1344 15-minute tests as I lower the Offset value. I've had a very solid 47x100.0 @Offset 0.015, but want to see how low I can go. I'm down to 1.3711 VID and Offset 0.010. I have HT disabled.

I'm noticing that Worker #4 seems to finish the tests almost 1 minute later than the other 3, and sometimes completes 1 less test during the run than the other 3. Could this be due to the CPU not getting enough power? Or is this within normal performance?

I have very little experience with Prime95, and it's probably a dumb question, but thought I toss it out.

Thanks.

Edit:
NM. Found the answer:

"Yes, it is normal. Windows decides what runs on what threads, and it can vary. Anything else running on a thread costs that thread CPU cycles, slowing down that worker just a tiny bit, and it adds up over time. The only thing that matters is if there is an error or the worker stops working."

Edited by jevon - 8/11/11 at 9:47pm
NooBuild
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k [Batch 3103B306 Costa Rica] P8P67 Pro rev 3.1 bios 3602 eVGA GTX580 DS @797MHz 2x4GB Corsair Vengeance DDR3 1600 CL8 8-8-8-24-2T 
Hard DriveOptical DriveOSMonitor
Crucial 512GB M4 SSD LightOn Lightscribe DVD WIN7-64 SP1 Samsung PX2370 @1920x1080 
KeyboardPowerCaseMouse
Logitech G110 Antec CP-1000 Antec Twelve Hundred v.3 Logitech G9X 
Mouse Pad
none 
  hide details  
Reply
NooBuild
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k [Batch 3103B306 Costa Rica] P8P67 Pro rev 3.1 bios 3602 eVGA GTX580 DS @797MHz 2x4GB Corsair Vengeance DDR3 1600 CL8 8-8-8-24-2T 
Hard DriveOptical DriveOSMonitor
Crucial 512GB M4 SSD LightOn Lightscribe DVD WIN7-64 SP1 Samsung PX2370 @1920x1080 
KeyboardPowerCaseMouse
Logitech G110 Antec CP-1000 Antec Twelve Hundred v.3 Logitech G9X 
Mouse Pad
none 
  hide details  
Reply
post #3075 of 9343
Whats the opinion on LLC settings? I'm running on extreme, but I think I might back it down. What is everyone else running on? I backed it down to 4.6, but shooting for 4.8 again, with the newfound PLL lowering knowledge.
Venom (Reborn)
(15 items)
 
  
CPUMotherboardGraphicsRAM
Core i7-2600K @ 4.6 GHz [1.33 vCore] [HT ON] ASUS P8P67 PRO (REV 3.1) EVGA GTX470 8 GB [2x4 GB] G.Skill Ripjaws X Series 1600 CL 9 
Hard DriveHard DriveHard DriveOptical Drive
Crucial C300 64 GB Western Digital 640 GB Samsung 2 TB Lite-On DVD Burner 
OSMonitorPowerCase
Windows 7 x64 Ultimate, Ubuntu 10.04, Arch Acer 22" 1680x1050, Dell 19" Corsair TX650 NZXT Tempest 
MouseMouse Pad
Logitech G500 Some random cloth thing 
  hide details  
Reply
Venom (Reborn)
(15 items)
 
  
CPUMotherboardGraphicsRAM
Core i7-2600K @ 4.6 GHz [1.33 vCore] [HT ON] ASUS P8P67 PRO (REV 3.1) EVGA GTX470 8 GB [2x4 GB] G.Skill Ripjaws X Series 1600 CL 9 
Hard DriveHard DriveHard DriveOptical Drive
Crucial C300 64 GB Western Digital 640 GB Samsung 2 TB Lite-On DVD Burner 
OSMonitorPowerCase
Windows 7 x64 Ultimate, Ubuntu 10.04, Arch Acer 22" 1680x1050, Dell 19" Corsair TX650 NZXT Tempest 
MouseMouse Pad
Logitech G500 Some random cloth thing 
  hide details  
Reply
post #3076 of 9343
Quote:
Originally Posted by Raptor_Jesus View Post
Whats the opinion on LLC settings? I'm running on extreme, but I think I might back it down. What is everyone else running on? I backed it down to 4.6, but shooting for 4.8 again, with the newfound PLL lowering knowledge.
I believe I read somewhere on here not to put that on Extreme just leave it on Ultra High.
Sinister
(13 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k @ 4.6ghz 1.335v] [Asus P8Z68-V Pro] [R6950 Unlocked Shaders] [8gb Vengeance 1333 8-8-8-24] 
Hard DriveOSMonitorKeyboard
[WD 10k RPM Raptor] [Windows 7 Ultimate x64] [LG LED 23in] [Logitech G15] 
PowerCaseMouse
[Mushkin 550w] [Lian-Li PC60B] [Logitech G9x] 
  hide details  
Reply
Sinister
(13 items)
 
  
CPUMotherboardGraphicsRAM
[i7 2600k @ 4.6ghz 1.335v] [Asus P8Z68-V Pro] [R6950 Unlocked Shaders] [8gb Vengeance 1333 8-8-8-24] 
Hard DriveOSMonitorKeyboard
[WD 10k RPM Raptor] [Windows 7 Ultimate x64] [LG LED 23in] [Logitech G15] 
PowerCaseMouse
[Mushkin 550w] [Lian-Li PC60B] [Logitech G9x] 
  hide details  
Reply
post #3077 of 9343
is there a way to manually set cpu fan speed in the bios? all i'm seeing are the different profiles.

i noticed today that one of my fans makes a whirring noise every few seconds on the lower fan speeds when i boot up. my temporary fix is to run prime for a while then turn it off which seems to do the trick.
post #3078 of 9343
Quote:
Originally Posted by gessay View Post
So i've been trying to get my system stable (for the sandy bridge stable club) @ 4.6 ghz over the past few days. The first few times I ran Prime it would 124BSOD and I increased the cpu manual voltage. At 1.325v Prime ran for 2 hours and then 124bsod. I increased voltage to 1.335v and it ran for 10 hours and again 124bsod. Prime95 log shows no failures. I'm wondering if it has something to do w/ the PLL or VCCIO instead of CPU voltage. throughout all the testing PLL was set to 1.75v and VCCIO at 1.175? any input would be appreciated. Should I keep upping the vcore or try something else?
To be honest, I think a VCCIO of 1.175V is way more than is needed for your system because you only have 1333MHz memory.


Quote:
Originally Posted by gessay View Post
the rest of my settings are as follows:

Ai Tweaker

Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 46
Internal PLL Voltage: Disabled
Memory Frequency: DDR3-1333MHz
DRAM Timing Control: 8-8-8-24-2T
EPU Power Saving MODE: Disabled



Ai Tweaker\\ CPU Power Management >

CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Disabled
Turbo Mode: Enabled
Long Duration Power Limit: Auto
Long Duration Maintained: Auto
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto



Ai Tweaker (in the DIGI+ VRM section)

Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Manual Mode
CPU Manual Voltage: 1.335V
DRAM Voltage: 1.5000V
VCCSA Voltage: Auto
VCCIO Voltage: 1.1750V
CPU PLL Voltage: 1.750V
PCH Voltage: Auto
CPU Spread Spectrum: Disabled



Advanced\\ CPU Configuration >

CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Disabled
Turbo Mode: Enabled
CPU C1E: Disabled
CPU C3 Report: Auto
CPU C6 Report: Enabled

__________________
I strongly recommend enabling Enhanced Intel Speedstep Technology, CPU Spread Spectrum, and C1E. With Sandy Bridge, the only time it makes sense to disable these is when you begin adjusting the BCLK. Otherwise, disabling them actually doesn't provide any benefits at all.

I also recommend setting C6 to Auto.

Regarding the VCCIO Voltage: I recommend leaving it on Auto for now since the overclock is small. However, I recommend playing with the CPU PLL Voltage because I thought it was pretty fun.


Quote:
Originally Posted by jevon View Post
Running Prime95 1792 and 1344 15-minute tests as I lower the Offset value. I've had a very solid 47x100.0 @Offset 0.015, but want to see how low I can go. I'm down to 1.3711 VID and Offset 0.010. I have HT disabled.

I'm noticing that Worker #4 seems to finish the tests almost 1 minute later than the other 3, and sometimes completes 1 less test during the run than the other 3. Could this be due to the CPU not getting enough power? Or is this within normal performance?

I have very little experience with Prime95, and it's probably a dumb question, but thought I toss it out.

Thanks.

Edit:
NM. Found the answer:

"Yes, it is normal. Windows decides what runs on what threads, and it can vary. Anything else running on a thread costs that thread CPU cycles, slowing down that worker just a tiny bit, and it adds up over time. The only thing that matters is if there is an error or the worker stops working."
I concur. While I was playing with my CPU PLL Voltage today and drilling the 1344K and 1792K FFTs, I saw Worker #4 complete faster at first for the very first time, and I also saw it perform 1 less test than the other 3.


Quote:
Originally Posted by Raptor_Jesus View Post
Whats the opinion on LLC settings? I'm running on extreme, but I think I might back it down. What is everyone else running on? I backed it down to 4.6, but shooting for 4.8 again, with the newfound PLL lowering knowledge.
I think everyone is using Ultra High. Some people are experimenting, but Ultra High is the recommended setting because it does the best job at reducing vDroop the most. Extreme just causes vRise...
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3079 of 9343
why is this mobo so buggy???
since i cant run settings from bio i tried from ai suite...
ive manage to put up to max performance and with some tunning... but when i open flash program on internet, i get warning that vcore is going up to 1.54v...
i had to restart, go to bios, somehow manage to press f5 for default and get back safely to windows...
SubZero
(15 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 6600k maximus viii hero Asus Strix RX 480 Corsair 
Hard DriveCoolingOSMonitor
Samsung Evo 850 Corsair H55i Windows 7 Ultimate SP1 HP 23xi 
KeyboardPowerCaseMouse
Roccat Isku Corsair CX 750M Corsair 300R Roccat Kiro 
Mouse Pad
Roccat Taito 
  hide details  
Reply
SubZero
(15 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 6600k maximus viii hero Asus Strix RX 480 Corsair 
Hard DriveCoolingOSMonitor
Samsung Evo 850 Corsair H55i Windows 7 Ultimate SP1 HP 23xi 
KeyboardPowerCaseMouse
Roccat Isku Corsair CX 750M Corsair 300R Roccat Kiro 
Mouse Pad
Roccat Taito 
  hide details  
Reply
post #3080 of 9343
If it's going up to 1.54V, then your voltage is on Auto.

However, I recommend not using Ai Suite II because your settings are only applied when Windows automatically launches Ai Suite II during startup. That means your settings are not actually saved in the UEFI (or rather, they're not saved to CMOS).

To see what I mean, make any change in Ai Suite II (like a voltage or something), apply it, reboot into the UEFI and then see if that setting was applied.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>