Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 325

post #3241 of 9344
Quote:
Originally Posted by dlerch View Post
Get a p8p67 deluxe

What caused your rig to fry? If it was user error, what did you do wrong.

I'll stick with the Pro since I can walk in and get a replacement board any time.
Not going to invest any money in a new Asus board until they get their bugged slabs of plastic fixed.

I turned it on..
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
Mighty-iTX
(12 items)
 
One foot in..
(17 items)
 
mATX
(12 items)
 
CPUMotherboardGraphicsRAM
i7-4770K M7-Impact Strix GTX980 Samsung 
Hard DriveCoolingOSMonitor
Crucial M4 256 Glacer 240L W8.1 K272HUL 
KeyboardPowerCaseMouse
Saitek Seasonic X-650 Prodigy MX518 
CPUMotherboardGraphicsGraphics
4770K/45/43 Maximus VI Extreme R290X R290X 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB RAIDR LSSWM 
CoolingOSMonitorKeyboard
Cooler Master Glacer 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
CPUMotherboardGraphicsRAM
i5-4330 Z87 Gryphon GTX690 G.Skill RipJawsX 
Hard DriveCoolingOSMonitor
WD Blacks Hyper 212 W8.1 ACER 
KeyboardPowerCaseMouse
Logitech Ultra X3 1000w Corsair 230T Orange Razer 
  hide details  
Reply
post #3242 of 9344
Quote:
Originally Posted by grunion View Post
I'll stick with the Pro since I can walk in and get a replacement board any time.
Not going to invest any money in a new Asus board until they get their bugged slabs of plastic fixed.

I turned it on..
I think it's your CPU. Since you took it to work and it fried another MB, maybe your PSU damaged the CPU at home.
    
CPUMotherboardGraphicsGraphics
Intel i7 2600k ASUS P8Z77WS EVGA GTX 980 SC ACX 2.0 EVGA GTX 980 ACX 2.0 
GraphicsRAMPower
EVGA GTX 970 SC ACX 2.0 Mushkin Enhanced Blackline 8GB (2 x 4GB) 240-Pi... FirePower ZX Series 1250W 80Plus Gold 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel i7 2600k ASUS P8Z77WS EVGA GTX 980 SC ACX 2.0 EVGA GTX 980 ACX 2.0 
GraphicsRAMPower
EVGA GTX 970 SC ACX 2.0 Mushkin Enhanced Blackline 8GB (2 x 4GB) 240-Pi... FirePower ZX Series 1250W 80Plus Gold 
  hide details  
Reply
post #3243 of 9344
How do we join the club? Do I need to take some pics?
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
post #3244 of 9344
Quote:
Originally Posted by grunion View Post
LOL

You and I are an exclusive club...."Club user error"

I took my cpu to work today, just to make sure it was dead before I filed an rma with Intel.
I really didn't want to lose this cpu, low volter.

Anyway we stuck it in a Pro board at work, it friggin killed that board.
Now the cpu has scorch marks on the contacts

I so hate SB..
I dunno how the first CPU and Motherboard died without me even overclocking it yet...lol

I already RMA'd the CPU to Intel. Hopefully they don't give me any problems because the CPU and stock fan were RMA'd in perfect condition. I even took a video.
An Angry Robot
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570k Asus P8Z77-V Pro Asus Strix 1070 G Skill Trident 2400mhz 
Hard DriveOptical DriveCoolingOS
Samsung 500gb SSD x 1tb HDD Samsung External Corsair H100i Windows 10 64bit 
MonitorMonitorKeyboardPower
Catleap Q270 Acer Coolermaster Quickfire Rapid (reds) Corsair 750HX 
CaseMouseMouse PadAudio
Corsair 540 Logitech G600 XFX Warpad Asus Xonar Essence STX 
  hide details  
Reply
An Angry Robot
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570k Asus P8Z77-V Pro Asus Strix 1070 G Skill Trident 2400mhz 
Hard DriveOptical DriveCoolingOS
Samsung 500gb SSD x 1tb HDD Samsung External Corsair H100i Windows 10 64bit 
MonitorMonitorKeyboardPower
Catleap Q270 Acer Coolermaster Quickfire Rapid (reds) Corsair 750HX 
CaseMouseMouse PadAudio
Corsair 540 Logitech G600 XFX Warpad Asus Xonar Essence STX 
  hide details  
Reply
post #3245 of 9344
Hi all,

I just got me an Asus P8Z68-V Pro today. I seems to work alright, havent tryed OC yet, but hope to be able to reach 5.4-5.5 as I do with my MSI board. My question is:

Why are Asus AI tools showing temperatures that are completely wrong, or at least 10-15c to low? I mean, I got watercooling, but it shows that CPU temps is like 10c below ambient and thats impossible.

HWmonitor shows around 15c more than AI tools. Is it bad sensors, or do I need to push a button somewhere?

Water-Rig
(25 items)
 
Chiller-Rig
(18 items)
 
work
(11 items)
 
CPUMotherboardGraphicsRAM
4770k MSI Z87 Mpower Max Gigabyte GTX 680 SOC Corsair Dominator GT2133 CL9-10-9-24-2T 
RAMRAMHard DriveHard Drive
Corsair Platinum 2400 CL10-12-12-31-2T  Avexir Core Series 2800 CL12-14-14-35-2T OCZ Vertex 3 MaxIOPS  Corsair Force 2 
OSMonitorKeyboardPower
Windows 7, x64 Ultimate BenQ 24" XL2410T (120hz) SteelSeries 6GV2 Silverstone Strider Gold 750w 
CaseMouseMouse PadAudio
CM Stacker 830 SteelSeries Xai Laser RUSE Gaming SteelSeries Logitech G35 
OtherOtherOtherOther
HWlabs Black-Ice SR-1 420 Radiator 3 x Prolimatech 140mm 3 x Silverstone Airpenetrator 141 3x Silverstone 121FM Fans (gfx) 
OtherOtherOtherOther
1x Swifttech MCP35x + MCP35x reservoir  EK Water Blocks Nichel-Acetal Supr. HF CPU EK Water Blocks Copper-Plexi Supr. HF VGA 2m ½" tube 
CPUMotherboardGraphicsRAM
P4 641 Asus Maximus Formula x38 Nvidia Geforce 7300LE Samsung PC5300 
Hard DriveCoolingCoolingCooling
Seagate 8x TECs, 50x50x41mm (288 couple) 35v 2x Phobya Temperature displays Neoprene tube 19/13 
CoolingCoolingCoolingCooling
4x Dominator GT waterblocks 1x EK CPU Supreme HF 2x EK DC 4 Pump  2x EK basic 250ml cylinder reservoirs 
CoolingCoolingCoolingOS
1x HWlabs GTX360 Scythe 3000 rpm 120x38mm 3x Enermax 120mm fans  Windows XP 
PowerCase
Enermax MaxRevo 1500W Fujitsu Siemens 
  hide details  
Reply
Water-Rig
(25 items)
 
Chiller-Rig
(18 items)
 
work
(11 items)
 
CPUMotherboardGraphicsRAM
4770k MSI Z87 Mpower Max Gigabyte GTX 680 SOC Corsair Dominator GT2133 CL9-10-9-24-2T 
RAMRAMHard DriveHard Drive
Corsair Platinum 2400 CL10-12-12-31-2T  Avexir Core Series 2800 CL12-14-14-35-2T OCZ Vertex 3 MaxIOPS  Corsair Force 2 
OSMonitorKeyboardPower
Windows 7, x64 Ultimate BenQ 24" XL2410T (120hz) SteelSeries 6GV2 Silverstone Strider Gold 750w 
CaseMouseMouse PadAudio
CM Stacker 830 SteelSeries Xai Laser RUSE Gaming SteelSeries Logitech G35 
OtherOtherOtherOther
HWlabs Black-Ice SR-1 420 Radiator 3 x Prolimatech 140mm 3 x Silverstone Airpenetrator 141 3x Silverstone 121FM Fans (gfx) 
OtherOtherOtherOther
1x Swifttech MCP35x + MCP35x reservoir  EK Water Blocks Nichel-Acetal Supr. HF CPU EK Water Blocks Copper-Plexi Supr. HF VGA 2m ½" tube 
CPUMotherboardGraphicsRAM
P4 641 Asus Maximus Formula x38 Nvidia Geforce 7300LE Samsung PC5300 
Hard DriveCoolingCoolingCooling
Seagate 8x TECs, 50x50x41mm (288 couple) 35v 2x Phobya Temperature displays Neoprene tube 19/13 
CoolingCoolingCoolingCooling
4x Dominator GT waterblocks 1x EK CPU Supreme HF 2x EK DC 4 Pump  2x EK basic 250ml cylinder reservoirs 
CoolingCoolingCoolingOS
1x HWlabs GTX360 Scythe 3000 rpm 120x38mm 3x Enermax 120mm fans  Windows XP 
PowerCase
Enermax MaxRevo 1500W Fujitsu Siemens 
  hide details  
Reply
post #3246 of 9344
Quote:
Originally Posted by qwwwizx View Post
Hi all,

I just got me an Asus P8Z68-V Pro today. I seems to work alright, havent tryed OC yet, but hope to be able to reach 5.4-5.5 as I do with my MSI board. My question is:

Why are Asus AI tools showing temperatures that are completely wrong, or at least 10-15c to low? I mean, I got watercooling, but it shows that CPU temps is like 10c below ambient and thats impossible.

HWmonitor shows around 15c more than AI tools. Is it bad sensors, or do I need to push a button somewhere?


Exactly what cooling are you using? I have an H50 and I'm getting about 42c idle OC'd at 4.5Ghz. If you can manage 5.5Ghz I will give you a shiny nickel.
Newest and best
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x ASUS PRIME X370-PRO EVGA GTX 970 SC (X2 IN SLI) Corsair Dominator 32GB 3000Mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 250GB SSD Western Digital Caviar Green 2TB Internal HDD LG WH16NS40 Super Multi Blue Internal SATA 16x ... Corsair Hydro Series H110i Extreme Performance ... 
OSMonitorKeyboardPower
Windows 10 Professional 64 Bit LG Electronics 32LF5600 32-Inch 1080p LED TV Logitech MK710 Desktop Wireless Keyboard EVGA SuperNOVA 1000 G2, 80+ GOLD 1000W, Fully M... 
CaseMouseAudioOther
Rosewill Gaming ATX Full Tower Computer Case wi... Logitech MK710 Desktop Wireless Mouse Logitech Z506 Surround Sound Home Theater Speak... Saitek PS28 X52 Flight Control System 
  hide details  
Reply
Newest and best
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x ASUS PRIME X370-PRO EVGA GTX 970 SC (X2 IN SLI) Corsair Dominator 32GB 3000Mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 250GB SSD Western Digital Caviar Green 2TB Internal HDD LG WH16NS40 Super Multi Blue Internal SATA 16x ... Corsair Hydro Series H110i Extreme Performance ... 
OSMonitorKeyboardPower
Windows 10 Professional 64 Bit LG Electronics 32LF5600 32-Inch 1080p LED TV Logitech MK710 Desktop Wireless Keyboard EVGA SuperNOVA 1000 G2, 80+ GOLD 1000W, Fully M... 
CaseMouseAudioOther
Rosewill Gaming ATX Full Tower Computer Case wi... Logitech MK710 Desktop Wireless Mouse Logitech Z506 Surround Sound Home Theater Speak... Saitek PS28 X52 Flight Control System 
  hide details  
Reply
post #3247 of 9344
Quote:
Originally Posted by christophermcne View Post
Exactly what cooling are you using? I have an H50 and I'm getting about 42c idle OC'd at 4.5Ghz. If you can manage 5.5Ghz I will give you a shiny nickel.
You should upgrade that H50 with an Prolimatech Megahalems v. 2.


I go for 5.4GHz+, up to 5.5GHz. I could make 5.4GHz+ with the same CPU on my MSI P67a-GD65. I think the MSI was limited by its VRMs.

As cooling I use a 3x140mm rad (HW-Labs SR-1), with Prolimatech 140mm push fans, and Silverstone 141AP fans to pull and make ventilation to chipsets etc.

You can see it here:




MSI benchmark with the same CPU:
Water-Rig
(25 items)
 
Chiller-Rig
(18 items)
 
work
(11 items)
 
CPUMotherboardGraphicsRAM
4770k MSI Z87 Mpower Max Gigabyte GTX 680 SOC Corsair Dominator GT2133 CL9-10-9-24-2T 
RAMRAMHard DriveHard Drive
Corsair Platinum 2400 CL10-12-12-31-2T  Avexir Core Series 2800 CL12-14-14-35-2T OCZ Vertex 3 MaxIOPS  Corsair Force 2 
OSMonitorKeyboardPower
Windows 7, x64 Ultimate BenQ 24" XL2410T (120hz) SteelSeries 6GV2 Silverstone Strider Gold 750w 
CaseMouseMouse PadAudio
CM Stacker 830 SteelSeries Xai Laser RUSE Gaming SteelSeries Logitech G35 
OtherOtherOtherOther
HWlabs Black-Ice SR-1 420 Radiator 3 x Prolimatech 140mm 3 x Silverstone Airpenetrator 141 3x Silverstone 121FM Fans (gfx) 
OtherOtherOtherOther
1x Swifttech MCP35x + MCP35x reservoir  EK Water Blocks Nichel-Acetal Supr. HF CPU EK Water Blocks Copper-Plexi Supr. HF VGA 2m ½" tube 
CPUMotherboardGraphicsRAM
P4 641 Asus Maximus Formula x38 Nvidia Geforce 7300LE Samsung PC5300 
Hard DriveCoolingCoolingCooling
Seagate 8x TECs, 50x50x41mm (288 couple) 35v 2x Phobya Temperature displays Neoprene tube 19/13 
CoolingCoolingCoolingCooling
4x Dominator GT waterblocks 1x EK CPU Supreme HF 2x EK DC 4 Pump  2x EK basic 250ml cylinder reservoirs 
CoolingCoolingCoolingOS
1x HWlabs GTX360 Scythe 3000 rpm 120x38mm 3x Enermax 120mm fans  Windows XP 
PowerCase
Enermax MaxRevo 1500W Fujitsu Siemens 
  hide details  
Reply
Water-Rig
(25 items)
 
Chiller-Rig
(18 items)
 
work
(11 items)
 
CPUMotherboardGraphicsRAM
4770k MSI Z87 Mpower Max Gigabyte GTX 680 SOC Corsair Dominator GT2133 CL9-10-9-24-2T 
RAMRAMHard DriveHard Drive
Corsair Platinum 2400 CL10-12-12-31-2T  Avexir Core Series 2800 CL12-14-14-35-2T OCZ Vertex 3 MaxIOPS  Corsair Force 2 
OSMonitorKeyboardPower
Windows 7, x64 Ultimate BenQ 24" XL2410T (120hz) SteelSeries 6GV2 Silverstone Strider Gold 750w 
CaseMouseMouse PadAudio
CM Stacker 830 SteelSeries Xai Laser RUSE Gaming SteelSeries Logitech G35 
OtherOtherOtherOther
HWlabs Black-Ice SR-1 420 Radiator 3 x Prolimatech 140mm 3 x Silverstone Airpenetrator 141 3x Silverstone 121FM Fans (gfx) 
OtherOtherOtherOther
1x Swifttech MCP35x + MCP35x reservoir  EK Water Blocks Nichel-Acetal Supr. HF CPU EK Water Blocks Copper-Plexi Supr. HF VGA 2m ½" tube 
CPUMotherboardGraphicsRAM
P4 641 Asus Maximus Formula x38 Nvidia Geforce 7300LE Samsung PC5300 
Hard DriveCoolingCoolingCooling
Seagate 8x TECs, 50x50x41mm (288 couple) 35v 2x Phobya Temperature displays Neoprene tube 19/13 
CoolingCoolingCoolingCooling
4x Dominator GT waterblocks 1x EK CPU Supreme HF 2x EK DC 4 Pump  2x EK basic 250ml cylinder reservoirs 
CoolingCoolingCoolingOS
1x HWlabs GTX360 Scythe 3000 rpm 120x38mm 3x Enermax 120mm fans  Windows XP 
PowerCase
Enermax MaxRevo 1500W Fujitsu Siemens 
  hide details  
Reply
post #3248 of 9344
Hi guys,

some time ago, I found my 4,8Ghz stable settings and since then I have been very happy with my overclock. It was 17h+ stable in Prime95 custom blend and I have played Crysis 2, Dirt 3 and Witcher 2 several hours without any problems.

Today I had my system suspend to ram. When I woke it up through keypress a few minutes later, I recognized, that It did not show anything. There was a beep combination and POST-Code EA shown on the boards display.
After cold booting it returned to its previous state. I think this is cause it is hybrid standby and the state is also saved to hard disk. When I try to suspend to disk I have exactly the same issue.

After loading the BIOS' optimal defaults, both suspend modes worked correctly. Afterwards I applied my OC'd settings and the problems returned.

These are my BIOS settings:

Ai Tweaker

Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 48
Internal PLL Voltage: Enabled
Memory Frequency: 2133
DRAM Timing Control: CL 9 - 11 - 9 - 28 - 2T
(same like in X.M.P. except the 2T, which is 1T there)
EPU Power Saving MODE: Disabled


Ai Tweaker\\ CPU Power Management >

CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
Long Duration Power Limit: 140 Watt
Long Duration Maintained: 32s
I set those values to prevent my system from clocking down (switching off turbo) frequently under load. Perhaps this has to do with the high RAM voltage of 1.65V
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto


Ai Tweaker (in the DIGI+ VRM section)

Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Offset Mode
Offset Mode Sign: +
CPU Offset Voltage: 0.020V
DRAM Voltage: 1.65V
VCCSA Voltage: Auto
VCCIO Voltage: 1,15V
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Enabled


Advanced\\ CPU Configuration >

CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Auto
CPU C6 Report: Auto

I did not try to change anything by now. Has anyone had same issues and figured out, how to fix this ? I use suspend to ram from time to time, would be very nice if I also could use this feature on this (pretty new) system.

Last, but not least, I have exactly the same issue with my DELL XPS M1530 notebook (Core2Duo T7700 2,4Ghz) with the difference, that this bios is on standard values without OC. Before installing Win 7 (was delivered with vista x86), everything went well.

Perhaps I have a basic configuration problem ? Both are running Windows 7 x64 SP1.
Edited by slimex - 8/20/11 at 1:58pm
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
AMD Turion II Neo N40L 2 x 1.5Ghz HP ProLiant MicroServer Board (AMD RS785E/SB820... Onboard AMD HD4200 VGA 128MB 2 x 2GB Unbuffered DDR3 ECC 800MHz 
Hard DriveHard DriveHard DriveOS
Kingston SSDNow V+200 SSD 60 GB 4x Western Digital Caviar Green 3TB WD30EZRX RA... Samsung EcoGreen F4 2TB HD204UI (2TB Backup) Windows Server 2012 Datacenter 
Other
LSI 3ware 9650SE-4LPML 4-Port SATA Hardware Rai... 
  hide details  
Reply
post #3249 of 9344
Quote:
Originally Posted by slimex View Post
Hi guys,

some time ago, I found my 4,8Ghz stable settings and since then I have been very happy with my overclock. It was 17h+ stable in Prime95 custom blend and I have played Crysis 2, Dirt 3 and Witcher 2 several hours without any problems.

Today I had my system suspend to ram. When I woke it up through keypress a few minutes later, I recognized, that It did not show anything. There was a beep combination and POST-Code EA shown on the boards display.
After cold booting it returned to its previous state. I think this is cause it is hybrid standby and the state is also saved to hard disk. When I try to suspend to disk I have exactly the same issue.

After loading the BIOS' optimal defaults, both suspend modes worked correctly. Afterwards I applied my OC'd settings and the problems returned.

These are my BIOS settings:

Ai Tweaker

Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 48
Internal PLL Voltage: Enabled
Memory Frequency: 2133
DRAM Timing Control: CL 9 - 11 - 9 - 28 - 2T
(same like in X.M.P. except the 2T, which is 1T there)
EPU Power Saving MODE: Disabled


Ai Tweaker\\ CPU Power Management >

CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
Long Duration Power Limit: 140 Watt
Long Duration Maintained: 32s
I set those values to prevent my system from clocking down (switching off turbo) frequently under load. Perhaps this has to do with the high RAM voltage of 1.65V
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto


Ai Tweaker (in the DIGI+ VRM section)

Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Offset Mode
Offset Mode Sign: +
CPU Offset Voltage: 0.020V
DRAM Voltage: 1.65V
VCCSA Voltage: Auto
VCCIO Voltage: 1,15V
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Enabled


Advanced\\ CPU Configuration >

CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Auto
CPU C6 Report: Auto

I did not try to change anything by now. Has anyone had same issues and figured out, how to fix this ? I use suspend to ram from time to time, would be very nice if I also could use this feature on this (pretty new) system.

Last, but not least, I have exactly the same issue with my DELL XPS M1530 notebook (Core2Duo T7700 2,4Ghz) with the difference, that this bios is on standard values without OC. Before installing Win 7 (was delivered with vista x86), everything went well.

Perhaps I have a basic configuration problem ? Both are running Windows 7 x64 SP1.
I have seen this problem on 3 different computers now, and concluded that it was something related to the GFX, eventually Nvidia driver but never got it solved. I just disable hibernate.
Water-Rig
(25 items)
 
Chiller-Rig
(18 items)
 
work
(11 items)
 
CPUMotherboardGraphicsRAM
4770k MSI Z87 Mpower Max Gigabyte GTX 680 SOC Corsair Dominator GT2133 CL9-10-9-24-2T 
RAMRAMHard DriveHard Drive
Corsair Platinum 2400 CL10-12-12-31-2T  Avexir Core Series 2800 CL12-14-14-35-2T OCZ Vertex 3 MaxIOPS  Corsair Force 2 
OSMonitorKeyboardPower
Windows 7, x64 Ultimate BenQ 24" XL2410T (120hz) SteelSeries 6GV2 Silverstone Strider Gold 750w 
CaseMouseMouse PadAudio
CM Stacker 830 SteelSeries Xai Laser RUSE Gaming SteelSeries Logitech G35 
OtherOtherOtherOther
HWlabs Black-Ice SR-1 420 Radiator 3 x Prolimatech 140mm 3 x Silverstone Airpenetrator 141 3x Silverstone 121FM Fans (gfx) 
OtherOtherOtherOther
1x Swifttech MCP35x + MCP35x reservoir  EK Water Blocks Nichel-Acetal Supr. HF CPU EK Water Blocks Copper-Plexi Supr. HF VGA 2m ½" tube 
CPUMotherboardGraphicsRAM
P4 641 Asus Maximus Formula x38 Nvidia Geforce 7300LE Samsung PC5300 
Hard DriveCoolingCoolingCooling
Seagate 8x TECs, 50x50x41mm (288 couple) 35v 2x Phobya Temperature displays Neoprene tube 19/13 
CoolingCoolingCoolingCooling
4x Dominator GT waterblocks 1x EK CPU Supreme HF 2x EK DC 4 Pump  2x EK basic 250ml cylinder reservoirs 
CoolingCoolingCoolingOS
1x HWlabs GTX360 Scythe 3000 rpm 120x38mm 3x Enermax 120mm fans  Windows XP 
PowerCase
Enermax MaxRevo 1500W Fujitsu Siemens 
  hide details  
Reply
Water-Rig
(25 items)
 
Chiller-Rig
(18 items)
 
work
(11 items)
 
CPUMotherboardGraphicsRAM
4770k MSI Z87 Mpower Max Gigabyte GTX 680 SOC Corsair Dominator GT2133 CL9-10-9-24-2T 
RAMRAMHard DriveHard Drive
Corsair Platinum 2400 CL10-12-12-31-2T  Avexir Core Series 2800 CL12-14-14-35-2T OCZ Vertex 3 MaxIOPS  Corsair Force 2 
OSMonitorKeyboardPower
Windows 7, x64 Ultimate BenQ 24" XL2410T (120hz) SteelSeries 6GV2 Silverstone Strider Gold 750w 
CaseMouseMouse PadAudio
CM Stacker 830 SteelSeries Xai Laser RUSE Gaming SteelSeries Logitech G35 
OtherOtherOtherOther
HWlabs Black-Ice SR-1 420 Radiator 3 x Prolimatech 140mm 3 x Silverstone Airpenetrator 141 3x Silverstone 121FM Fans (gfx) 
OtherOtherOtherOther
1x Swifttech MCP35x + MCP35x reservoir  EK Water Blocks Nichel-Acetal Supr. HF CPU EK Water Blocks Copper-Plexi Supr. HF VGA 2m ½" tube 
CPUMotherboardGraphicsRAM
P4 641 Asus Maximus Formula x38 Nvidia Geforce 7300LE Samsung PC5300 
Hard DriveCoolingCoolingCooling
Seagate 8x TECs, 50x50x41mm (288 couple) 35v 2x Phobya Temperature displays Neoprene tube 19/13 
CoolingCoolingCoolingCooling
4x Dominator GT waterblocks 1x EK CPU Supreme HF 2x EK DC 4 Pump  2x EK basic 250ml cylinder reservoirs 
CoolingCoolingCoolingOS
1x HWlabs GTX360 Scythe 3000 rpm 120x38mm 3x Enermax 120mm fans  Windows XP 
PowerCase
Enermax MaxRevo 1500W Fujitsu Siemens 
  hide details  
Reply
post #3250 of 9344
Quote:
Originally Posted by qwwwizx View Post
Hi all,

I just got me an Asus P8Z68-V Pro today. I seems to work alright, havent tryed OC yet, but hope to be able to reach 5.4-5.5 as I do with my MSI board. My question is:

Why are Asus AI tools showing temperatures that are completely wrong, or at least 10-15c to low? I mean, I got watercooling, but it shows that CPU temps is like 10c below ambient and thats impossible.

HWmonitor shows around 15c more than AI tools. Is it bad sensors, or do I need to push a button somewhere?

I don't know what it is about Ai Suite II, but I have never seen it show correct temperatures. So, I recommend just uninstalling Ai Suite II (seriously) and only using Real Temp 3.67:

http://www.overclockers.com/forums/s...d.php?t=667250

If you want to keep Ai Suite II installed but make it stop starting with Windows, then let me know. I can show you the trick! It's not as simple as it might sound, but it's still easy to do (because there are only a few simple steps involved).


Quote:
Originally Posted by slimex View Post
Hi guys,

some time ago, I found my 4,8Ghz stable settings and since then I have been very happy with my overclock. It was 17h+ stable in Prime95 custom blend and I have played Crysis 2, Dirt 3 and Witcher 2 several hours without any problems.

Today I had my system suspend to ram. When I woke it up through keypress a few minutes later, I recognized, that It did not show anything. There was a beep combination and POST-Code EA shown on the boards display.
After cold booting it returned to its previous state. I think this is cause it is hybrid standby and the state is also saved to hard disk. When I try to suspend to disk I have exactly the same issue.

After loading the BIOS' optimal defaults, both suspend modes worked correctly. Afterwards I applied my OC'd settings and the problems returned.

These are my BIOS settings:

Ai Tweaker

Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 48
Internal PLL Voltage: Enabled
Memory Frequency: 2133
DRAM Timing Control: CL 9 - 11 - 9 - 28 - 2T
(same like in X.M.P. except the 2T, which is 1T there)
EPU Power Saving MODE: Disabled


Ai Tweaker\\ CPU Power Management >

CPU Ratio: Auto
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
Long Duration Power Limit: 140 Watt
Long Duration Maintained: 32s
I set those values to prevent my system from clocking down (switching off turbo) frequently under load. Perhaps this has to do with the high RAM voltage of 1.65V
Short Duration Power Limit: Auto
Additional Turbo Voltage: Auto
Primary Plane Current Limit: Auto


Ai Tweaker (in the DIGI+ VRM section)

Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Offset Mode
Offset Mode Sign: +
CPU Offset Voltage: 0.020V
DRAM Voltage: 1.65V
VCCSA Voltage: Auto
VCCIO Voltage: 1,15V
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Enabled


Advanced\\ CPU Configuration >

CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Intel Virtualization Technology: Disabled
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Auto
CPU C6 Report: Auto

I did not try to change anything by now. Has anyone had same issues and figured out, how to fix this ? I use suspend to ram from time to time, would be very nice if I also could use this feature on this (pretty new) system.

Last, but not least, I have exactly the same issue with my DELL XPS M1530 notebook (Core2Duo T7700 2,4Ghz) with the difference, that this bios is on standard values without OC. Before installing Win 7 (was delivered with vista x86), everything went well.

Perhaps I have a basic configuration problem ? Both are running Windows 7 x64 SP1.
I don't know.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>