Originally Posted by Julez007;15066493
Thank you, whoever created these settings because i could not get over 4.5ghz until now...
So i took these settings and used an offset of +0.025 to reach 4.7ghz. With Prime95 on blend test for 3hours and still counting my Core Voltage jumps from 1.392 - 1.384... My VID shows 1.3761 and my highest temps have been 70-75-77-71. The temps have gradually lowered because of idle temps getting lower and are now sitting around 65-70-73-68.
Do these settings look okay with these temps or do i need to change any of them? My Memory is set to 1910mhz at 9-11-9-27...
Those are settings I used and my system specs, they work for me I'm glad it helped as always each system varies rarely matching exact settings required but they can be a good starting point for testing stability.
The template is copied from the Asus UEFI bios Ai Tweaker and Advanced pages where all overclocking adjustments are made. If anyone is to be thanked it would be Asus. It was compiled 1st in this thread on this forum at post #2441 and repeated in post 2 by the OP. I typed it up from a printed copy of that post and placed the code tags on it to conserve space in the thread and no thanks is required. Although the screen capture tool (F12) while in the UEFI is fantastic it takes up a lot of space to post them up here and capture all relevant settings to offer peeps help with overclocking. The template captures all relevent settings in the minimal amount of space. All who want to use it are perfectly welcome in any way they see fit unless Asus objects which I doubt.Your temps look fine with Real temp (77c max) but not Core Temp 98c is way to high for normal use what does Probe II say and what cooling are you using
? Looks like you have a decent chip there mine requires a bit more voltage (on auto)
to be stable at that clock. I would make sure to run Prime Blend max memory for a minimum of 10 hours to insure stability. That is the amount of time it takes Prime to run a complete loop of all test.Edited by owcraftsman - 9/26/11 at 5:53am