Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 380

post #3791 of 9344
Quote:
Originally Posted by Julez007 View Post
I could not get it to boot past the windows load screen with the settings above, and I tried raising the voltage from +0.025 to 0.050 in increments of 0.005.

Is it bad to have the bclk at 102.2?
Quote:
Originally Posted by nawon72 View Post
Your RAM may be unstable because BCLK also affects RAM clock speed. Change the BCLK to 100.0, then make sure your RAM is using its rated clock speed, timings, and voltage. Also, make sure VCCIO is on Auto. If that doesn't work, wait for TwoCables to assist you. Unlike TwoCables, i do sleep every now and then
I tried TwoCables settings and could not get it to post past windows log in with 100 bclk and a multi of 47. i raised offset voltage from +0.025 - 0.050 in increments of 0.005 with no luck.

what i meant by the 102.2 bclk is that i am stable with that setting at 4.7ghz for 14hours of prime blend test.

Is it bad to have the bclk at the setting of 102.2?
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
intel i7 2600k @ 4.9ghz asus p8z68 v pro zotac nvidia gtx 680 2x4gigs patriot 2000mhz 
Hard DriveHard DriveCoolingCooling
Corsair force gt 3 SSD 120g 250GB Xspc Rasa kit 750  Alpha Cool radiator 45mm Dual 120 
CoolingOSMonitorPower
Xspc radiator 35mm Dual 120 Windows 7 Ultimate yamakasi catleap 27inc @ 120hz Corsair Ax850 Gold 
CaseMouse
Cooler Master Storm Trooper razer naga 
  hide details  
Reply
My System
(17 items)
 
  
CPUMotherboardGraphicsRAM
intel i7 2600k @ 4.9ghz asus p8z68 v pro zotac nvidia gtx 680 2x4gigs patriot 2000mhz 
Hard DriveHard DriveCoolingCooling
Corsair force gt 3 SSD 120g 250GB Xspc Rasa kit 750  Alpha Cool radiator 45mm Dual 120 
CoolingOSMonitorPower
Xspc radiator 35mm Dual 120 Windows 7 Ultimate yamakasi catleap 27inc @ 120hz Corsair Ax850 Gold 
CaseMouse
Cooler Master Storm Trooper razer naga 
  hide details  
Reply
post #3792 of 9344
If p8z68-v doesn't have the marvell controller, why does official website provide marvell controller driver? A mistake?
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K 4.5G@1.33V Asus P8Z68-V Sapphire HD 6970 2GB Corsair Vengeance 16GB 
Hard DriveOptical DriveCoolingOS
Crucial M4 64G&WD Black 1T None NH-D14 Win7 pro v64 
MonitorKeyboardPowerCase
Hp ZR24W Cherry G80-3000 Brown Corsair HX850 NZXT H2 
Mouse
G500 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K 4.5G@1.33V Asus P8Z68-V Sapphire HD 6970 2GB Corsair Vengeance 16GB 
Hard DriveOptical DriveCoolingOS
Crucial M4 64G&WD Black 1T None NH-D14 Win7 pro v64 
MonitorKeyboardPowerCase
Hp ZR24W Cherry G80-3000 Brown Corsair HX850 NZXT H2 
Mouse
G500 
  hide details  
Reply
post #3793 of 9344
Quote:
Originally Posted by Julez007 View Post
I tried TwoCables settings and could not get it to post past windows log in with 100 bclk and a multi of 47. i raised offset voltage from +0.025 - 0.050 in increments of 0.005 with no luck.

what i meant by the 102.2 bclk is that i am stable with that setting at 4.7ghz for 14hours of prime blend test.

Is it bad to have the bclk at the setting of 102.2?
As far as i know, using a BCLK of 102.2 or any other settings isnt bad, but is generally harder to get stable. So as long as you are sure your RAM and CPU are stable with a BCLK of 102.2, then it is safe.
post #3794 of 9344
Quote:
Originally Posted by lowirve View Post
If p8z68-v doesn't have the marvell controller, why does official website provide marvell controller driver? A mistake?
I know that is what I was thinking. A first I was like oh it's for the eSata...it is marvell...but then I was like isn't the JMicron controller is for the eSata?

Anyone?
post #3795 of 9344
Quote:
Originally Posted by SeanWebster View Post
I know that is what I was thinking. A first I was like oh it's for the eSata...it is marvell...but then I was like isn't the JMicron controller is for the eSata?

Anyone?
I see it in the storage section, but im not sure what it is. Ill try to google it after i eat.



Edit: Try giving this a read. Im off to eat, so i don't have time to read it.
Edited by nawon72 - 9/27/11 at 9:21pm
post #3796 of 9344
Quote:
Originally Posted by TwoCables View Post
I don't know how to describe them.

Since they are both set to Auto, let's change Load-Line Calibration to Ultra High. This will reduce the vDroop which could eliminate the BSODs.


Note: if you want to say "@mode +", then you can type it like this: +0.010

hi
ran prime for 11 hours and then just for an test ran intellburn on veryhigh settings on 15 runs and both stress tests all passed.realtemp maxed at 73 on core 3.

played bbc2 for 4 hrs and no problems their.
but the problem always seem to start from cold boot up the following morning i get bsod could be memory screen am not sure.i revert back to defaults settings and reran oc again and also reran prime,realtemps etc for 8 hrs all passed.
so i am puzzled into what's going on
post #3797 of 9344
Quote:
Originally Posted by nawon72 View Post
I see it in the storage section, but im not sure what it is. Ill try to google it after i eat.



Edit: Try giving this a read. Im off to eat, so i don't have time to read it.
This is for p8z68-v pro, not p8z68-v.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K 4.5G@1.33V Asus P8Z68-V Sapphire HD 6970 2GB Corsair Vengeance 16GB 
Hard DriveOptical DriveCoolingOS
Crucial M4 64G&WD Black 1T None NH-D14 Win7 pro v64 
MonitorKeyboardPowerCase
Hp ZR24W Cherry G80-3000 Brown Corsair HX850 NZXT H2 
Mouse
G500 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K 4.5G@1.33V Asus P8Z68-V Sapphire HD 6970 2GB Corsair Vengeance 16GB 
Hard DriveOptical DriveCoolingOS
Crucial M4 64G&WD Black 1T None NH-D14 Win7 pro v64 
MonitorKeyboardPowerCase
Hp ZR24W Cherry G80-3000 Brown Corsair HX850 NZXT H2 
Mouse
G500 
  hide details  
Reply
post #3798 of 9344
post #3799 of 9344
Quote:
Originally Posted by Julez007 View Post
I tried TwoCables settings and could not get it to post past windows log in with 100 bclk and a multi of 47. i raised offset voltage from +0.025 - 0.050 in increments of 0.005 with no luck.

what i meant by the 102.2 bclk is that i am stable with that setting at 4.7ghz for 14hours of prime blend test.

Is it bad to have the bclk at the setting of 102.2?
When using a BCLK of 100.0 MHz with a multi of 47, did you select "DDR3-1866MHz" in the UEFI? If not, then select DDR3-1866MHz and try again.

I just want to see what happens.


Quote:
Originally Posted by chillidog View Post
hi
ran prime for 11 hours and then just for an test ran intellburn on veryhigh settings on 15 runs and both stress tests all passed.realtemp maxed at 73 on core 3.

played bbc2 for 4 hrs and no problems their.
but the problem always seem to start from cold boot up the following morning i get bsod could be memory screen am not sure.i revert back to defaults settings and reran oc again and also reran prime,realtemps etc for 8 hrs all passed.
so i am puzzled into what's going on
Did you change LLC to Ultra High as I suggested?

If not, then I recommend it.

If you did, then change C3 and C6 to Disabled.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3800 of 9344
double post
Edited by pg_ice - 9/28/11 at 11:53am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>