Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 479

post #4781 of 9343
Quote:
Originally Posted by TwoCables;15493576 
Hey, I've seen you somewhere before. smile.gif

I would start at like 1.304V (as shown in CPU-Z). Then you can go up or down from there.

Everywhere, actually. lol!

Let me just confirm, the idle VCore in CPU-Z (at desired multi) is always lower than the one set in UEFI, right? Because of VDrop.

And VDroop makes the load VCore in CPU-Z always less than the idle VCore (at desired multi), correct?

Is it recommended to set PLL voltage initially at 1.7V?
post #4782 of 9343
Quote:
Originally Posted by kevindd992002 View Post
Everywhere, actually. lol!
hehe


Quote:
Originally Posted by kevindd992002 View Post
Let me just confirm, the idle VCore in CPU-Z (at desired multi) is always lower than the one set in UEFI, right? Because of VDrop.
Yep!


Quote:
Originally Posted by kevindd992002 View Post
And VDroop makes the load VCore in CPU-Z always less than the idle VCore (at desired multi), correct?
Yes sir! Droopy voltage, but not droopy drawers!


Quote:
Originally Posted by kevindd992002 View Post
Is it recommended to set PLL voltage initially at 1.7V?
I don't know, but I think it's a worth a shot.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #4783 of 9343
Quote:
Originally Posted by TwoCables View Post
hehe



Yep!



Yes sir! Droopy voltage, but not droopy drawers!



I don't know, but I think it's a worth a shot.
With VDroop phenomenon, is idle voltage pertaining to the VCore voltage when it is idling at 1600MHz?

I set my UEFI to manual VCore of 1.3V now and the idle voltage seen in Win7 (at 1600MHz) is 1.304. That's higher than the one set in UEFI, so where is VDrop phenomenon kicking there?
post #4784 of 9343
Quote:
Originally Posted by kevindd992002 View Post
With VDroop phenomenon, is idle voltage pertaining to the VCore voltage when it is idling at 1600MHz?

I set my UEFI to manual VCore of 1.3V now and the idle voltage seen in Win7 (at 1600MHz) is 1.304. That's higher than the one set in UEFI, so where is VDrop phenomenon kicking there?
Hmm.. Which Load-Line Calibration setting are you using?
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #4785 of 9343
Quote:
Originally Posted by TwoCables View Post
Hmm.. Which Load-Line Calibration setting are you using?
Ultra High. I set VCore voltage at UEFI to 1.305 now, rebooted and tried to go into UEFI again. I saw that the VCore voltage monitored there is 1.304/1.312.

I then went back to Win7 and fired up CPU-Z and I noticed that the idle voltage is 1.304/1.312 also. Correct me if I'm wrong but why am I seeing 0 VDrop here? I think that's bad because VDrop is there for protection from overshoot, right?
post #4786 of 9343
Quote:
Originally Posted by kevindd992002 View Post
Ultra High. I set VCore voltage at UEFI to 1.305 now, rebooted and tried to go into UEFI again. I saw that the VCore voltage monitored there is 1.304/1.312.

I then went back to Win7 and fired up CPU-Z and I noticed that the idle voltage is 1.304/1.312 also. Correct me if I'm wrong but why am I seeing 0 VDrop here? I think that's bad because VDrop is there for protection from overshoot, right?
Hmm, sounds like your CPU likes to do a little bit of vRise with Ultra High. Can you try just "High" to see what it does?
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #4787 of 9343
Quote:
Originally Posted by TwoCables View Post
Hmm, sounds like your CPU likes to do a little bit of vRise with Ultra High. Can you try just "High" to see what it does?
I think the monitor value seen in UEFI is approximately the same as the one in CPU-Z, is this correct? Because I've noticed that they roughly give the same value.

Here are my observations:

UEFI Monitor:

Extreme LLC - 1.296/1.304
Ultra High LLC - 1.304/1.312
High LLC - 1.296/1.304

CPU-z idle voltage:

Extreme LLC - 1.296/1.304
Ultra High LLC - 1.304/1.312
High LLC - 1.296/1.304

Isn't it weird that Ultra High produces even more idle voltage than Extreme?
post #4788 of 9343
Quote:
Originally Posted by kevindd992002 View Post
I think the monitor value seen in UEFI is approximately the same as the one in CPU-Z, is this correct? Because I've noticed that they roughly give the same value.

Here are my observations:

UEFI Monitor:

Extreme LLC - 1.296/1.304
Ultra High LLC - 1.304/1.312
High LLC - 1.296/1.304

CPU-z idle voltage:

Extreme LLC - 1.296/1.304
Ultra High LLC - 1.304/1.312
High LLC - 1.296/1.304

Isn't it weird that Ultra High produces even more idle voltage than Extreme?
Everything here must be 100% normal because that's how it is for you and it's working fine.

I didn't mess with Manual voltage enough to notice these things.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #4789 of 9343
Quote:
Originally Posted by TwoCables View Post
Everything here must be 100% normal because that's how it is for you and it's working fine.

I didn't mess with Manual voltage enough to notice these things.
Oh ok. Is having a 0 VDrop or even a reverse VDrop (CPUZ idle voltage higher than what is set in UEFI) good or bad?
post #4790 of 9343
Quote:
Originally Posted by kevindd992002 View Post
Oh ok. Is having a 0 VDrop or even a reverse VDrop (CPUZ idle voltage higher than what is set in UEFI) good or bad?
I don't know if whether or not it should be considered good or bad. At least, I don't know yet.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>