Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 501

post #5001 of 9370
Quote:
Originally Posted by dujo11 View Post

OK.. after 1 week new mobo arrived from service center... everything works fine...
But the thing is i get tems in load up to 96C , using stock cooler.. Any ideas?

Yep sounds like the cooler is loose. That is if you are not overclocking and at stock speeds that temp is way to high. However the proc has built in protection and it will start throttling down at about 98c. This is not full proof so you must be vigilant watching those temps. Most folks like to keep there Proc below 40c idle and no more than 85c 100% load with any given Overclock. It is somewhat determined by ambient temps but at stock speeds 25-38c idle 75-86c at 100% load with that stock cooler. If you are overclocking an Aftermarket cooler is an absolute must. Consider a Cooler Master Hyper 212+ for a budget friendly solution and if money is no object consider a Thermalright Silver Arrow
Luxe 1
(33 items)
 
Enthoo Primo
(28 items)
 
 
CPUMotherboardGraphicsRAM
i7 7700k MSI Z270 Gaming M7 Asus GTX 1080Ti FE G.SKILL 32GB (4 x 8GB) Ripjaws V Series DDR4 PC... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro M.2 WDC WD1003FZEX-00MK2A0 Seagate Backup+ Desk SCSI Disk Device asus bc-12b1st 
CoolingCoolingCoolingCooling
XSPC Raystorm Pro corsair sp120 high performance led tygon E-1000 1/2 ID x 3/4 OD plasticizer free kryographics Pascal for NVIDIA TITAN X and GTX ... 
CoolingCoolingCoolingCooling
Mayhem Pastel White UV Monsoon center compression fittings  Alphacool NexXxoS XT45 Full Copper 280mm radiator  Alphacool NexXxoS UT60 Full Copper 240mm radiator  
CoolingCoolingCoolingOS
Monsoon Series Two D5 Premium Dual Bay Reservoi... Phanteks PH-F140SP Case Fan Aquacomputer backplate for kryographics Pascal ... Windows 10 Pro x64 
MonitorMonitorKeyboardPower
Asus PG278Q Gsync (Primary) Asus PB278Q (Extended) Corsair Gaming K70 LUX RGB Mechanical Gaming Ke... CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12... 
CaseMouseMouse PadAudio
Phanteks Enthoo Luxe PH-ES614L  Func MS-3 rev2 Razer exactMat X speed Creative Sound Blaster Zx 116dB PCIe Gaming Sou... 
AudioAudioOtherOther
Logitech Z906 5.1 Surround Sound Speaker System... HyperX Cloud II Gaming Headset Darkside dimable LED strips  Modsmart Kobra Cables 
Other
EVGA PowerLink 
CPUMotherboardGraphicsGraphics
i7 4790k @ 4.8 MSI Z97 Gaming 7  Saphire R9 290x (hynix) Saphire R9 290x (Hynix) 
RAMHard DriveHard DriveHard Drive
GSkill Ripjaws Z F3-2400C10D-8GZH 2x Samsung 850 Pro Raid-0  AMD RAMDisk WD1001FALS (Data/Backup) 
Optical DriveCoolingOSMonitor
Asus BC-12B1ST BlueRay Custom Water Cooled Windows 10 Pro x64 Asus PG279Q 
MonitorKeyboardPowerCase
Asus PG278Q Corsair K70 EVGA 1000w G2 Phanteks Enthoo Primo 
MouseMouse PadAudioAudio
FUNC MS-3 rev2  XTRAC PADS Ripper Optical Mouse pad Kingston HyperX Cloud II  Creative Sound Blaster Z PCIe 116dB SNR Gaming ... 
OtherOtherOtherOther
Alphacool NexXxoS UT60 Full Copper 420mm EK Supremacy EVO Alphacool NexXxoS Monsta 360 Radiator EK-FC R9-290X Waterblock - Nickel Acetal (Rev.2.0) 
OtherOtherOtherOther
EK-FC R9-290X backplate Bitspower Dual / Single D5 Top Upgrade Kit 150 ... Bitspower D5 MOD TOP (Black "S" Model) PrimoFlex Advanced LRT 10ft Tubing - 1/2in. ID ... 
  hide details  
Reply
Luxe 1
(33 items)
 
Enthoo Primo
(28 items)
 
 
CPUMotherboardGraphicsRAM
i7 7700k MSI Z270 Gaming M7 Asus GTX 1080Ti FE G.SKILL 32GB (4 x 8GB) Ripjaws V Series DDR4 PC... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro M.2 WDC WD1003FZEX-00MK2A0 Seagate Backup+ Desk SCSI Disk Device asus bc-12b1st 
CoolingCoolingCoolingCooling
XSPC Raystorm Pro corsair sp120 high performance led tygon E-1000 1/2 ID x 3/4 OD plasticizer free kryographics Pascal for NVIDIA TITAN X and GTX ... 
CoolingCoolingCoolingCooling
Mayhem Pastel White UV Monsoon center compression fittings  Alphacool NexXxoS XT45 Full Copper 280mm radiator  Alphacool NexXxoS UT60 Full Copper 240mm radiator  
CoolingCoolingCoolingOS
Monsoon Series Two D5 Premium Dual Bay Reservoi... Phanteks PH-F140SP Case Fan Aquacomputer backplate for kryographics Pascal ... Windows 10 Pro x64 
MonitorMonitorKeyboardPower
Asus PG278Q Gsync (Primary) Asus PB278Q (Extended) Corsair Gaming K70 LUX RGB Mechanical Gaming Ke... CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12... 
CaseMouseMouse PadAudio
Phanteks Enthoo Luxe PH-ES614L  Func MS-3 rev2 Razer exactMat X speed Creative Sound Blaster Zx 116dB PCIe Gaming Sou... 
AudioAudioOtherOther
Logitech Z906 5.1 Surround Sound Speaker System... HyperX Cloud II Gaming Headset Darkside dimable LED strips  Modsmart Kobra Cables 
Other
EVGA PowerLink 
CPUMotherboardGraphicsGraphics
i7 4790k @ 4.8 MSI Z97 Gaming 7  Saphire R9 290x (hynix) Saphire R9 290x (Hynix) 
RAMHard DriveHard DriveHard Drive
GSkill Ripjaws Z F3-2400C10D-8GZH 2x Samsung 850 Pro Raid-0  AMD RAMDisk WD1001FALS (Data/Backup) 
Optical DriveCoolingOSMonitor
Asus BC-12B1ST BlueRay Custom Water Cooled Windows 10 Pro x64 Asus PG279Q 
MonitorKeyboardPowerCase
Asus PG278Q Corsair K70 EVGA 1000w G2 Phanteks Enthoo Primo 
MouseMouse PadAudioAudio
FUNC MS-3 rev2  XTRAC PADS Ripper Optical Mouse pad Kingston HyperX Cloud II  Creative Sound Blaster Z PCIe 116dB SNR Gaming ... 
OtherOtherOtherOther
Alphacool NexXxoS UT60 Full Copper 420mm EK Supremacy EVO Alphacool NexXxoS Monsta 360 Radiator EK-FC R9-290X Waterblock - Nickel Acetal (Rev.2.0) 
OtherOtherOtherOther
EK-FC R9-290X backplate Bitspower Dual / Single D5 Top Upgrade Kit 150 ... Bitspower D5 MOD TOP (Black "S" Model) PrimoFlex Advanced LRT 10ft Tubing - 1/2in. ID ... 
  hide details  
Reply
post #5002 of 9370
Quote:
Originally Posted by james_k_p View Post

Well I read twocables template on the first page and although with + 0.040 with a 48 by all cores, it worked and didn't lock up with a custom prime blend using 1792, It did bsod if I put the offset to -.

The voltage in cpu-z goes from 1.408 - 1.416. I'm guessing this is not good as it should be under 1.4 correct?

I went a changed the by all cores to 47 and it's getting the same voltages.

They stayed in the mid 1.350ish range with a I had it at 45.

Can I just leave it be or do I need to tweak something to get the voltage down a little? Thanks!

1.4+ is to high for 4.7,4.8

for me i only use the xmp profile for my set up for 4.7 am geting 1.35/1.36v .
at 4.8 all i had to do is up the voltage manually to 1.38 and cpu-z shows 1.36-1.39.and my temps don't go above 69 on any cores.i found out if i need to up the ratio i had to up the voltage by 2v
i did hit the 5.0 but the voltage change means i had to pump the voltage to 1.42-1.43 and prime stable for 8 hrs.but to me i think 1.42/1.43 might be on the high side.but the temps are all well below 70

i have noticed that you got 16 gig of memory is their any reason for this? i had 16 gig i down graded to 8 gig becouse at first i had a lot of bsod's untill i went to 8 gig my oc went much better and temps well inproved.

any way am at 4.9 now with 1.38v and 24/7 stable for over 2 months now and the temps @ max and don't go over 69
i really think this is all down to using the xmp memory profile
i would check to see if your memory supports the xmp and am quite sure you will hit 5.0 easy with the 2600k chip and much better voltage:thumb:
post #5003 of 9370
Quote:
Originally Posted by turrican9 View Post

This forum is a total mess now, in my opinion. that is one of the reasons I've not been very active here lately.
I simply do not like what I'm seeing here, and I've lost interest for the forum after the 'upgrade'. I 'struggle' just to write this, without getting 'sick'.
This is a total failure... Sorry OCN...

for any help to you turrican9 and to others who thinks the same i have pm ocn with my concerns about this new upgade lark.
i have viewed my concerns and mentioned that they have lost some top posters like your self & twocables and co leaving alot of newbies like myself who needed help and without your section i would'nt be where i am now with my oc.

am a bit on the old fashion side don't change things when running great in the first time.
personally i think this sad they have done this but it needs more to complain and voice their concerns about this forum set up now:mad:
post #5004 of 9370
If they want to bow out just do it but don't blame the upgraded forum. They are doing what the have to to survive and continue at a high level. Sure it will take some getting used to and a few tweaks here and there but to run away crying like a baby seem a bit melodramatic.
Luxe 1
(33 items)
 
Enthoo Primo
(28 items)
 
 
CPUMotherboardGraphicsRAM
i7 7700k MSI Z270 Gaming M7 Asus GTX 1080Ti FE G.SKILL 32GB (4 x 8GB) Ripjaws V Series DDR4 PC... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro M.2 WDC WD1003FZEX-00MK2A0 Seagate Backup+ Desk SCSI Disk Device asus bc-12b1st 
CoolingCoolingCoolingCooling
XSPC Raystorm Pro corsair sp120 high performance led tygon E-1000 1/2 ID x 3/4 OD plasticizer free kryographics Pascal for NVIDIA TITAN X and GTX ... 
CoolingCoolingCoolingCooling
Mayhem Pastel White UV Monsoon center compression fittings  Alphacool NexXxoS XT45 Full Copper 280mm radiator  Alphacool NexXxoS UT60 Full Copper 240mm radiator  
CoolingCoolingCoolingOS
Monsoon Series Two D5 Premium Dual Bay Reservoi... Phanteks PH-F140SP Case Fan Aquacomputer backplate for kryographics Pascal ... Windows 10 Pro x64 
MonitorMonitorKeyboardPower
Asus PG278Q Gsync (Primary) Asus PB278Q (Extended) Corsair Gaming K70 LUX RGB Mechanical Gaming Ke... CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12... 
CaseMouseMouse PadAudio
Phanteks Enthoo Luxe PH-ES614L  Func MS-3 rev2 Razer exactMat X speed Creative Sound Blaster Zx 116dB PCIe Gaming Sou... 
AudioAudioOtherOther
Logitech Z906 5.1 Surround Sound Speaker System... HyperX Cloud II Gaming Headset Darkside dimable LED strips  Modsmart Kobra Cables 
Other
EVGA PowerLink 
CPUMotherboardGraphicsGraphics
i7 4790k @ 4.8 MSI Z97 Gaming 7  Saphire R9 290x (hynix) Saphire R9 290x (Hynix) 
RAMHard DriveHard DriveHard Drive
GSkill Ripjaws Z F3-2400C10D-8GZH 2x Samsung 850 Pro Raid-0  AMD RAMDisk WD1001FALS (Data/Backup) 
Optical DriveCoolingOSMonitor
Asus BC-12B1ST BlueRay Custom Water Cooled Windows 10 Pro x64 Asus PG279Q 
MonitorKeyboardPowerCase
Asus PG278Q Corsair K70 EVGA 1000w G2 Phanteks Enthoo Primo 
MouseMouse PadAudioAudio
FUNC MS-3 rev2  XTRAC PADS Ripper Optical Mouse pad Kingston HyperX Cloud II  Creative Sound Blaster Z PCIe 116dB SNR Gaming ... 
OtherOtherOtherOther
Alphacool NexXxoS UT60 Full Copper 420mm EK Supremacy EVO Alphacool NexXxoS Monsta 360 Radiator EK-FC R9-290X Waterblock - Nickel Acetal (Rev.2.0) 
OtherOtherOtherOther
EK-FC R9-290X backplate Bitspower Dual / Single D5 Top Upgrade Kit 150 ... Bitspower D5 MOD TOP (Black "S" Model) PrimoFlex Advanced LRT 10ft Tubing - 1/2in. ID ... 
  hide details  
Reply
Luxe 1
(33 items)
 
Enthoo Primo
(28 items)
 
 
CPUMotherboardGraphicsRAM
i7 7700k MSI Z270 Gaming M7 Asus GTX 1080Ti FE G.SKILL 32GB (4 x 8GB) Ripjaws V Series DDR4 PC... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 950 Pro M.2 WDC WD1003FZEX-00MK2A0 Seagate Backup+ Desk SCSI Disk Device asus bc-12b1st 
CoolingCoolingCoolingCooling
XSPC Raystorm Pro corsair sp120 high performance led tygon E-1000 1/2 ID x 3/4 OD plasticizer free kryographics Pascal for NVIDIA TITAN X and GTX ... 
CoolingCoolingCoolingCooling
Mayhem Pastel White UV Monsoon center compression fittings  Alphacool NexXxoS XT45 Full Copper 280mm radiator  Alphacool NexXxoS UT60 Full Copper 240mm radiator  
CoolingCoolingCoolingOS
Monsoon Series Two D5 Premium Dual Bay Reservoi... Phanteks PH-F140SP Case Fan Aquacomputer backplate for kryographics Pascal ... Windows 10 Pro x64 
MonitorMonitorKeyboardPower
Asus PG278Q Gsync (Primary) Asus PB278Q (Extended) Corsair Gaming K70 LUX RGB Mechanical Gaming Ke... CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12... 
CaseMouseMouse PadAudio
Phanteks Enthoo Luxe PH-ES614L  Func MS-3 rev2 Razer exactMat X speed Creative Sound Blaster Zx 116dB PCIe Gaming Sou... 
AudioAudioOtherOther
Logitech Z906 5.1 Surround Sound Speaker System... HyperX Cloud II Gaming Headset Darkside dimable LED strips  Modsmart Kobra Cables 
Other
EVGA PowerLink 
CPUMotherboardGraphicsGraphics
i7 4790k @ 4.8 MSI Z97 Gaming 7  Saphire R9 290x (hynix) Saphire R9 290x (Hynix) 
RAMHard DriveHard DriveHard Drive
GSkill Ripjaws Z F3-2400C10D-8GZH 2x Samsung 850 Pro Raid-0  AMD RAMDisk WD1001FALS (Data/Backup) 
Optical DriveCoolingOSMonitor
Asus BC-12B1ST BlueRay Custom Water Cooled Windows 10 Pro x64 Asus PG279Q 
MonitorKeyboardPowerCase
Asus PG278Q Corsair K70 EVGA 1000w G2 Phanteks Enthoo Primo 
MouseMouse PadAudioAudio
FUNC MS-3 rev2  XTRAC PADS Ripper Optical Mouse pad Kingston HyperX Cloud II  Creative Sound Blaster Z PCIe 116dB SNR Gaming ... 
OtherOtherOtherOther
Alphacool NexXxoS UT60 Full Copper 420mm EK Supremacy EVO Alphacool NexXxoS Monsta 360 Radiator EK-FC R9-290X Waterblock - Nickel Acetal (Rev.2.0) 
OtherOtherOtherOther
EK-FC R9-290X backplate Bitspower Dual / Single D5 Top Upgrade Kit 150 ... Bitspower D5 MOD TOP (Black "S" Model) PrimoFlex Advanced LRT 10ft Tubing - 1/2in. ID ... 
  hide details  
Reply
post #5005 of 9370
Looks like ill be joining the club soon. I just order a P8Z68 DELUXE/GEN3 from amazon. Now I just need to make up my mind if I want to get a 2700K or just get a 2600K thumb.gif
post #5006 of 9370
Quote:
Originally Posted by HiLuckyB View Post

Looks like ill be joining the club soon. I just order a P8Z68 DELUXE/GEN3 from amazon. Now I just need to make up my mind if I want to get a 2700K or just get a 2600K thumb.gif

If you don't care about Hyperthreading (which most of us don't), you should go for the best bang-for-the-buck i5-2500K and spend the extra money somewhere else smile.gif Just IMO, of course.
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
My System
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Asus P8Z68-V/GEN3 EVGA GTX 1080 Ti FTW3 2x8GB G.Skill Trident X (F3-2400C10D-16GTX) @ 2... 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Samsung Spinpoint F3 1TB CPU: Swiftech H220-X Windows 10 x64 Enterprise 
MonitorKeyboardPowerCase
Dell S2716DG Ducky Shine 3 DK9008 MX Brown and Red LED Seasonic P-760 SS-760XP2 Cooler Master HAF 922 
MouseMouse PadAudioAudio
Roccat Savu Steelseries QCK Mass Edifier HCS2330 2.1 Speaker System (using Onboa... HyperX Cloud Revolver Gaming Headset 
Other
APC BR1500GI UPS 
  hide details  
Reply
post #5007 of 9370
Quote:
Originally Posted by chillidog View Post

1.4+ is to high for 4.7,4.8
for me i only use the xmp profile for my set up for 4.7 am geting 1.35/1.36v .
at 4.8 all i had to do is up the voltage manually to 1.38 and cpu-z shows 1.36-1.39.and my temps don't go above 69 on any cores.i found out if i need to up the ratio i had to up the voltage by 2v
i did hit the 5.0 but the voltage change means i had to pump the voltage to 1.42-1.43 and prime stable for 8 hrs.but to me i think 1.42/1.43 might be on the high side.but the temps are all well below 70
i have noticed that you got 16 gig of memory is their any reason for this? i had 16 gig i down graded to 8 gig becouse at first i had a lot of bsod's untill i went to 8 gig my oc went much better and temps well inproved.
any way am at 4.9 now with 1.38v and 24/7 stable for over 2 months now and the temps @ max and don't go over 69
i really think this is all down to using the xmp memory profile
i would check to see if your memory supports the xmp and am quite sure you will hit 5.0 easy with the 2600k chip and much better voltage:thumb:

Thanks for the response. I'm actually using the XMP profile now as I switched out the older regular Ripjaws from GSkill with what they recommended, the Ripjaw X's that is now updated in my profile. Per their instructions, I could and should use XMP, so that part is different from Twocable's settings. And with this, I was getting those voltages. I lowered it back down to 45 for now.

So you're saying I should try it with a manual voltage of 1.38 and forgo the offset? And see where that gets me?

Well, I'm pretty much using this machine only for video capping/encoding and things of that nature, and being RAM is so cheap now, I got the 16gbs. Matter of fact, the Ripjaw X kit I have now comes in a 16gb pack.
I had no idea that more RAM impacted temps.

In closing, you are currently using yours with the voltage manually set to 1.38? I may do that when I have more time this weekend and run more tests. Thanks!
Media Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600K Asus P8Z68-V Pro VisionTek 900369 Radeon HD 6670 16GB G.SKILL Ripjaws X F3-12800CL9Q-16GBXL 
Hard DriveOSMonitorPower
OCZ Solid3 SSD/Intel 510 SSD Win 7 Ultimate 64bit Acer 22" LCD CoolMax 700W 
CaseMouse
Cooler Master Centurion 5 MS Intellimouse 
  hide details  
Reply
Media Server
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600K Asus P8Z68-V Pro VisionTek 900369 Radeon HD 6670 16GB G.SKILL Ripjaws X F3-12800CL9Q-16GBXL 
Hard DriveOSMonitorPower
OCZ Solid3 SSD/Intel 510 SSD Win 7 Ultimate 64bit Acer 22" LCD CoolMax 700W 
CaseMouse
Cooler Master Centurion 5 MS Intellimouse 
  hide details  
Reply
post #5008 of 9370
I can't get my mouse to work in my P8P67 UEFI. It's a G500 and I have the latest drivers (setpoint) installed.

Also, how can I control my 3 pin fans that are plugged into the mobo? Is there software I can use to do this?

One of my fans, (I think my coolit eco) is retardedly loud especially under "load" (never really exceed 60% CPU usage ATM). My define R3 is supposed to be quiet! mad.gif
post #5009 of 9370
Quote:
Originally Posted by kevindd992002 View Post

If you don't care about Hyperthreading (which most of us don't), you should go for the best bang-for-the-buck i5-2500K and spend the extra money somewhere else smile.gif Just IMO, of course.

I do some video editing thats why im going with the i7 thumb.gif Im coming from a i7 875K @4.329GHz, So a i5 seems like I would be going the wrong way in my mind biggrin.gif I sold my 875K and MB to my brother Because he needed an upgrade, And I was board with that setup anyways biggrin.gif
post #5010 of 9370
Hey guys its been a while since I last posted here but I want to OC my SB finally and was wondering if anyone has had good results with ASUS extreme setting in the UEFI or its auto overclock features in the AI suite software. I've read mixed opinions on both while looking for info so I'm not really sure if I should do a manual OC or just use one of these alternatives. I am looking to hit around 4.5 Ghz if possible on my Hyper 212+ or something around that area since I want a 24/7 stable OC for gaming/browsing etc.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>