Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>
New Posts  All Forums:Forum Nav:

>>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>> - Page 858

post #8571 of 9343

Omg.  Do you guys remember how I said that I had my memory voltage set to Auto?  I said that I believed the Auto setting was setting it to 1.5V, but I was wrong.  It turns out it was setting it 1.65V - even when using the X.M.P. profile instead of Manual.  I guess I was just assuming that it was setting it to 1.5V because that's what's in the SPD.

 

So, I have it manually set to 1.5V again.  lol

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #8572 of 9343
Quote:
Originally Posted by TwoCables View Post

Omg.  Do you guys remember how I said that I had my memory voltage set to Auto?  I said that I believed the Auto setting was setting it to 1.5V, but I was wrong.  It turns out it was setting it 1.65V - even when using the X.M.P. profile instead of Manual.  I guess I was just assuming that it was setting it to 1.5V because that's what's in the SPD.

So, I have it manually set to 1.5V again.  lol

Lol. 1.65V isn't too high though but that is if you are overclocking the RAM. I know that you don't overclock the RAM modules so 1.5V is great thumb.gif
post #8573 of 9343
Quote:
Originally Posted by kevindd992002 View Post


Lol. 1.65V isn't too high though but that is if you are overclocking the RAM. I know that you don't overclock the RAM modules so 1.5V is great thumb.gif

 

lol yeah, I know that.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #8574 of 9343
Quote:
Originally Posted by TwoCables View Post

lol yeah, I know that.

Yup, I just reitirated it, lol.
post #8575 of 9343

I'm kind of wondering now if that might have been the reason for some of my strange instabilities.  I remember learning somewhere that sometimes a higher-than-necessary memory voltage can cause some instabilities.

 

I put my settings back down to Medium LLC, Phase Control to Optimized, Duty Control to T. Probe, Offset to +0.065V, and C3 and C6 enabled.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #8576 of 9343
Quote:
Originally Posted by TwoCables View Post

I'm kind of wondering now if that might have been the reason for some of my strange instabilities.  I remember learning somewhere that sometimes a higher-than-necessary memory voltage can cause some instabilities.

I put my settings back down to Medium LLC, Phase Control to Optimized, Duty Control to T. Probe, Offset to +0.065V, and C3 and C6 enabled.

Regarding the Phase Control and Duty Control, I've read before in shadowfax's post that using Optimized and T. Probe, respectively, leads to CPU throttling for his system and IIRC his CPU was only at 4.7GHz (2500K). So I'm going to set mine at Extreme and VRM frequency to 350 again. I don't think T. Probe will be useful in my case also, because my ambient temp is higher than what you guys have so I don't want the motherboard automatically balancing due to temps.
post #8577 of 9343
Quote:
Originally Posted by owcraftsman View Post


It shaves a bit of time off the post for me. For some it gets rid of the double post screen which is annoying at best with the marvel ctrl enabled.  Unless for some reason you need the see the option ROM message or have your system delay looking for it at post why not?  Force Bios I think will force the third party ROM message at post. This option goes way back and was introduced back in the NF2 days as was Keep Current any who I don't use Force Bios and prefer as fast a boot as possible which for me varies between 30-35 sec to a usable desktop from a cold start.

Thanks for the response, I changed it also to ''Keep current'' but can not say I noticed a faster boot. Although my boot is already very fast - around 30 sec also.
Quote:
Originally Posted by kevindd992002 View Post

Regarding the Phase Control and Duty Control, I've read before in shadowfax's post that using Optimized and T. Probe, respectively, leads to CPU throttling for his system and IIRC his CPU was only at 4.7GHz (2500K).

Well for my 4,5 Ghz OC I dont have any problems with throttling while using the exact same settings...
My Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 4,5GHz, 1.33v Asus P8Z68-V Pro Gen3 Sapphire HD7950 OC Edition @ 1130 / 1550, 1.150v 8GB Corsair CML8GX3M2A1600C9 @ DDR3-1600, 9-9-9... 
Hard DriveOptical DriveCoolingCooling
1x Samsung 830 Series Desktop Upgrade Kit Sony Optiarc 24x DVDRW AD-7280S Scythe Mugen 2 Rev. B 2x Front intake fans 
CoolingCoolingOSMonitor
1x Large intake side fan 1x Back exhaust fan Windows 7 Enterprise x64 SP1 Samsung SyncMaster 2494hm 
KeyboardPowerCaseMouse
Logitech Media Keyboard 600 Corsair Enthusiast TX850M Corsair Carbide 500R Black Logitech G5 Laser Mouse 
AudioAudio
Realtek High Definition Audio AMD High Definition Audio Device 
  hide details  
Reply
My Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 4,5GHz, 1.33v Asus P8Z68-V Pro Gen3 Sapphire HD7950 OC Edition @ 1130 / 1550, 1.150v 8GB Corsair CML8GX3M2A1600C9 @ DDR3-1600, 9-9-9... 
Hard DriveOptical DriveCoolingCooling
1x Samsung 830 Series Desktop Upgrade Kit Sony Optiarc 24x DVDRW AD-7280S Scythe Mugen 2 Rev. B 2x Front intake fans 
CoolingCoolingOSMonitor
1x Large intake side fan 1x Back exhaust fan Windows 7 Enterprise x64 SP1 Samsung SyncMaster 2494hm 
KeyboardPowerCaseMouse
Logitech Media Keyboard 600 Corsair Enthusiast TX850M Corsair Carbide 500R Black Logitech G5 Laser Mouse 
AudioAudio
Realtek High Definition Audio AMD High Definition Audio Device 
  hide details  
Reply
post #8578 of 9343
Quote:
Originally Posted by Daffie82 View Post


Thanks for the response, I changed it also to ''Keep current'' but can not say I noticed a faster boot. Although my boot is already very fast - around 30 sec also.
Well for my 4,5 Ghz OC I dont have any problems with throttling while using the exact same settings...

 

If there is a difference, then it would only be in the POST time.

 

I don't have any throttling problems either.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #8579 of 9343
Oh ok. Regarding the VRM frequency, isn´t it bad to leave it at Auto?
post #8580 of 9343
Quote:
Originally Posted by kevindd992002 View Post

Oh ok. Regarding the VRM frequency, isn´t it bad to leave it at Auto?

 

Here's what Juan Jose at ASUS said in his guide on [H]ard|Forum:

 

"Enter a value of 350. This is best for sustaining stability at multis of 48x or above. This is key especially for running unrealistic loading testing such as prime or LinX".

 

Earlier in the guide, he says this:  "VRM Frequency change to 350 – this value will allow for scaling to 50+ multi without issues"

 

I haven't seen anything anywhere in any guide that gives the impression that using Auto is bad.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › >>The Official ASUS P8P67/P8Z68 & P8Z68/GEN3 Series Owners Club>>