Overclock.net › Forums › Case Mods & Cases › Computer Cases › Need a little help with a case
New Posts  All Forums:Forum Nav:

Need a little help with a case

post #1 of 3
Thread Starter 
So last weekend I was doing a full system build in the Xigmatek Pantheon, and a very rare thing happened. While un-installing the system from the case, I found one standoff that was not fully screwed in. So I go whatever and take the board out with the standoff clinging to the screw touching the board. I hold the standoff and take the screw out. But when I tried re-installing the standoff, something odd happened: the middle ATX screw hole IN the case simply didn't work. I tried screws and standoffs, but when I tried to screw them in, they never stopped screwing no matter how much I twisted.

Since it's the middle standoff, I'm thinking it's pretty important. I was thinking of super gluing a stand off on to messed up hole. Would this be fine? Thanks for any help
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
post #2 of 3
Yeah you can do that if you like, or more so, use what a lot of people may refer to as blue loctite, it works well. If you don't have that, you can try gluing the back of the case where the standoff is at.

The thing is, you probably stripped the threads off the socket. But still if you end up not being able to glue it down, just install the standoff it there anyways so there is at least something there to hold down the MB no matter how weak the threads are, and there are 8 other places the motherboard is screwed down, so you are ok.
Dev0
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II x6 1090T @ 3.8 GHz ASUS M4A78-E 790GX PowerColor HD Radeon 7850 2 GB 2x4 GB DDR2 800 
Hard DriveOptical DriveOSMonitor
Crucial M500 240 GB SSD Samsung Super WriteMaster DVD Burner 20x Windows 10 Pro x64 ASUS VH226H 21.5" 
KeyboardPowerCaseMouse
Logitech PC Power & Cooling 500W Antec Three Hundred Modded Microsoft 3-Button Mouse 
Mouse Pad
Cheap Soft Mousepad 
  hide details  
Reply
Dev0
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II x6 1090T @ 3.8 GHz ASUS M4A78-E 790GX PowerColor HD Radeon 7850 2 GB 2x4 GB DDR2 800 
Hard DriveOptical DriveOSMonitor
Crucial M500 240 GB SSD Samsung Super WriteMaster DVD Burner 20x Windows 10 Pro x64 ASUS VH226H 21.5" 
KeyboardPowerCaseMouse
Logitech PC Power & Cooling 500W Antec Three Hundred Modded Microsoft 3-Button Mouse 
Mouse Pad
Cheap Soft Mousepad 
  hide details  
Reply
post #3 of 3
Thread Starter 
Thanks! I'll buy some of this.
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Need a little help with a case