Overclock.net › Forums › AMD › AMD - General › another 1090t overclocking help =P
New Posts  All Forums:Forum Nav:

another 1090t overclocking help =P

post #1 of 39
Thread Starter 
ok so im finally overclocking my 1090t yayy! lol im trying to go for 4ghz maybe 4.2 if i feel in the mood for it lol. depends on my temps since im running on air D-14 FTW!
well anyways i need yours guys help with it just to make sure i get this right since this is my second time ocing a pc(first time majorly ocing one) redface.gif

So default settings are as followed:

CPU: 3.2Ghz 16x mult 1.392v

NB: 200mhz 1.140v

HT: 200mhz 1.212v

CPU-NB: 1.187v

SB: 1.122-124( goes up and down a lot between those)

First try:

boost my mult to 19.5 and uped the v one notch. 1.4125
Nb boosted to 2400mhz 1.1875v

booted up fine ran 3dmark 06 fully and got about 17600

second try:
now for 4ghz! =D i might need help on this guys so here goes im trying for

20x 1.425v for now ill boost the volts if it does become stable as i know the max is 1.5.

NB at 1.1875v 2600mhz

i hit enter and i hope it works.... will post update. any advice to make it fully stable or maybe helping me get to 4.2? also i want to oc my ram which ive never done and when i look at it. well my brain crys... lol
post #2 of 39
Thread Starter 
So ive heard messing my your HT is bad so as for now i wont touch it lol!
post #3 of 39
You should just try to over-clock the cpu, by itself. That way if it BSOD then you know that it was the cpu over-clock and not the NB over-clock. Just over-clock 1 thing at a time, so you can narrow don't any problems you might have.
Ronin
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1100T Crosshair III Formula Radeon HD 5850 x2 Mushkin 1600 7-9-7-24 
Hard DriveHard DriveOptical DriveCooling
128GB Plextor ssd 500 GB WD Lite-ON multi-drive Corsair H100 
OSMonitorKeyboardPower
Windows 7 Ultimate 28" Hanns-G G110 Corsair HX850w 
CaseMouseMouse PadAudio
HAF 932 G500 X Trac pad Steelseries 
  hide details  
Reply
Ronin
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1100T Crosshair III Formula Radeon HD 5850 x2 Mushkin 1600 7-9-7-24 
Hard DriveHard DriveOptical DriveCooling
128GB Plextor ssd 500 GB WD Lite-ON multi-drive Corsair H100 
OSMonitorKeyboardPower
Windows 7 Ultimate 28" Hanns-G G110 Corsair HX850w 
CaseMouseMouse PadAudio
HAF 932 G500 X Trac pad Steelseries 
  hide details  
Reply
post #4 of 39
Some 1.4-1.45V should be fine, the NH-D14 keeps x6 cool to the point where voltage requirement is lower smile.gif
Keep the HT link around 2000Mhz
post #5 of 39
lower the bclock alittle then raise the multi
Sandstorm
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k MSI P67A-G45 Sapphire 6870 Patriot 2x2gb 1333mhz 
Hard DriveOptical DriveMonitorPower
500gb Wester Digital Caviar Blue Sony DVD/RW Drive Acer P216HV 21.5in + Acer P205H 20in 730W Raidmax 
Case
NZXT Gamma 
  hide details  
Reply
Sandstorm
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k MSI P67A-G45 Sapphire 6870 Patriot 2x2gb 1333mhz 
Hard DriveOptical DriveMonitorPower
500gb Wester Digital Caviar Blue Sony DVD/RW Drive Acer P216HV 21.5in + Acer P205H 20in 730W Raidmax 
Case
NZXT Gamma 
  hide details  
Reply
post #6 of 39
Thread Starter 
ok thanks guys yea im at 1.42 and it booted fine just waiting for 3dmarks to finish. then ill do a occt 1hr test after work =) btw i see you have gt-15 on your d-14 does it really help? louder than stock?
post #7 of 39
Thread Starter 
anyone recommend some settings i can mess with on my ram? btw deff seeing some better fps just from 3.9CPU 2.4NB to 4.0CPU 2.6NB the parts where 3dmark was dropping fps isn't as much anymore =) funny to see ohh there goes the blue screen lol sigh. ill try uping he nb to 1.2 and try again
Edited by TG_bigboss - 5/13/11 at 12:14pm
post #8 of 39
G.SKILL is not good for OC'ing.....this may be your problem
Sandstorm
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k MSI P67A-G45 Sapphire 6870 Patriot 2x2gb 1333mhz 
Hard DriveOptical DriveMonitorPower
500gb Wester Digital Caviar Blue Sony DVD/RW Drive Acer P216HV 21.5in + Acer P205H 20in 730W Raidmax 
Case
NZXT Gamma 
  hide details  
Reply
Sandstorm
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k MSI P67A-G45 Sapphire 6870 Patriot 2x2gb 1333mhz 
Hard DriveOptical DriveMonitorPower
500gb Wester Digital Caviar Blue Sony DVD/RW Drive Acer P216HV 21.5in + Acer P205H 20in 730W Raidmax 
Case
NZXT Gamma 
  hide details  
Reply
post #9 of 39
Thread Starter 
Quote:
Originally Posted by Celcoid;13492194 
G.SKILL is not good for OC'ing.....this may be your problem

weird cause Ive heard different. I see a lot of ppl oc there g.skill and tighten there timings which is what i want to do later after my oc is stable. i guess its just luck maybe? idk its what ive heard. Its my first time owning g.skill =P
post #10 of 39
yeah gskill can be sketchy try using one stick and see if you get better results what are your timings
Sandstorm
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k MSI P67A-G45 Sapphire 6870 Patriot 2x2gb 1333mhz 
Hard DriveOptical DriveMonitorPower
500gb Wester Digital Caviar Blue Sony DVD/RW Drive Acer P216HV 21.5in + Acer P205H 20in 730W Raidmax 
Case
NZXT Gamma 
  hide details  
Reply
Sandstorm
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k MSI P67A-G45 Sapphire 6870 Patriot 2x2gb 1333mhz 
Hard DriveOptical DriveMonitorPower
500gb Wester Digital Caviar Blue Sony DVD/RW Drive Acer P216HV 21.5in + Acer P205H 20in 730W Raidmax 
Case
NZXT Gamma 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › another 1090t overclocking help =P