Overclock.net › Forums › Intel › Intel CPUs › i7 950 @ 4Ghz please help!!
New Posts  All Forums:Forum Nav:

i7 950 @ 4Ghz please help!!

post #1 of 10
Thread Starter 
Hi everyone,

After reading and experimentation I managed to OC my pc (look at my signature) without BSOD at 4Ghz. However, I got a rounding error on P95 after 9 hours of blend test!!

Here are my settings:

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[191]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1531MHz]
UCLK Frequency.........................[3063MHz]
QPI Link Data Rate.....................[6893]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.325000]
CPU PLL Voltage........................[1.86]
QPI/DRAM Core Voltage..................[1.325000]
IOH Voltage............................[1.20]
IOH PCIE Voltage.......................[1.52]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.58]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]


Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[700mV]
CPU Clock Skew.........................[Normal]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Normal]
PCIE Spread Spectrum...................[Disabled]

CPU Ratio Setting....................[21.0]
C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
MPS and ACPI MADT ordering........[Modern ordering]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Disabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]

Memory timings 9-9-9-28


Now I just started testing again making the following only changes (with bold red):

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[191]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1531MHz] CHANGED TO 1149MHZ
UCLK Frequency.........................[3063MHz]
QPI Link Data Rate.....................[6893]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.325000]
CPU PLL Voltage........................[1.86] CHANGED TO 1.90
QPI/DRAM Core Voltage..................[1.325000]
IOH Voltage............................[1.20]
IOH PCIE Voltage.......................[1.52]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.58] CHANGED TO 1.60
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]


Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[700mV]
CPU Clock Skew.........................[Normal]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Normal]
PCIE Spread Spectrum...................[Disabled]

CPU Ratio Setting....................[21.0]
C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
MPS and ACPI MADT ordering........[Modern ordering]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Disabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]

Memory timings 9-9-9-28 CHANGED TO 10-10-10-29

Please stop me if you think I should change something else instead of the values in bold red.

Thanks in advance!

Elias
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
post #2 of 10
CPU PLL too high, some people find setting it less than 1.80v helps, dont bother pushing more than 1.88v.

Change DRAM Voltage to 0.02v above the specified voltage by the RAM.

Uncore clock must be 2x the Ram Multiplier.

Set QPI Link rate to the lowest setting, but not slow mode.

If you are reducing Ram Freq, you can reduce CPU VTT (QPI/DRAM) at 1066Mhz only ~1.20v is required, 1.25v should be enough for 1100Mhz +the BCLCK OC. Also having too little VTT is just as bad as having too much VTT, you must find the sweet spot.

All you need is a bit more Vcore or VTT on your original settings.
Edited by jasjeet - 5/14/11 at 10:25am
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
post #3 of 10
Thread Starter 
Quote:
Originally Posted by jasjeet View Post
CPU PLL too high, some people find setting it less than 1.80v helps, dont bother pushing more than 1.88v.

Change DRAM Voltage to 0.02v above the specified voltage by the RAM.

Uncore clock must be 2x the Ram Multiplier.

Set QPI Link rate to the lowest setting, but not slow mode.

If you are reducing Ram Freq, you can reduce CPU VTT (QPI/DRAM) at 1066Mhz only ~1.20v is required, 1.25v should be enough for 1100Mhz +the BCLCK OC. Also having too little VTT is just as bad as having too much VTT, you must find the sweet spot.

All you need is a bit more Vcore or VTT on your original settings.
Thanks for your quick response.

Somebody in another forum told me to decrease RAM speed, loosen timings and increase ram voltages. I thought it may be good to increase the ppl. Wrong obviously.

Another thing, I thought that voltage above specs is a 'big NO'; is it not?

So, what about 1 notch vcore and 1notch qpi/dram core voltage (which is the VTT as I gather, right?) on my original settings?
Edited by traxevc - 5/14/11 at 10:33am
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
post #4 of 10
Your i7 is rated at 1.20v or wahtever, yet you run at 1.32v? lol

Voltage spec is a guide, all mobos usually provide just enough voltage at load or a little less, hence 0.02v will overcome that small loss and prevent any doubt in your mind that the Ram is not getting enough juice. It wont do any damage, ive pushed VDIMM to 1.70v on my board. As long as VTT is 0.5v within VDIMM you are safe, of course that doesnt mean you can run 2v VDIMM and 1.5v Vtt, but it gives you a bit of freedom.

Raise Vtt first, see how it goes. If not reduce Vtt, and raise vcore. If not raise both. If still not, then repeat but instead of 1 notch, try 2notches.

Long process, but itll get you the stability at the best efficiency.

If you look in P95 folder, open results.txt, in there track down what FFT length the Core failed at. A length that is 1024k or greater usually means RAM/Vtt, a small length, less than 1024k will usually mean the Vcore.

Try play with this setting too:
CPU Differential Amplitude, try 800mv or 900mv.

23x Multi will most likely require less Vcore too. Ram speed loss will have no real world performance loss, only in synthetic benches.

Id also reduce PLL to 1.80v, dont need to mess with it tbh.
Edited by jasjeet - 5/14/11 at 11:04am
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
post #5 of 10
Thread Starter 
Quote:
Originally Posted by jasjeet View Post
Your i7 is rated at 1.20v or wahtever, yet you run at 1.32v? lol

Voltage spec is a guide, all mobos usually provide just enough voltage at load or a little less, hence 0.02v will overcome that small loss and prevent any doubt in your mind that the Ram is not getting enough juice. It wont do any damage, ive pushed VDIMM to 1.70v on my board. As long as VTT is 0.5v within VDIMM you are safe, of course that doesnt mean you can run 2v VDIMM and 1.5v Vtt, but it gives you a bit of freedom.

Raise Vtt first, see how it goes. If not reduce Vtt, and raise vcore. If not raise both. If still not, then repeat but instead of 1 notch, try 2notches.

Long process, but itll get you the stability at the best efficiency.

If you look in P95 folder, open results.txt, in there track down what FFT length the Core failed at. A length that is 1024k or greater usually means RAM/Vtt, a small length, less than 1024k will usually mean the Vcore.

Try play with this setting too:
CPU Differential Amplitude, try 800mv or 900mv.

23x Multi will most likely require less Vcore too. Ram speed loss will have no real world performance loss, only in synthetic benches.

Id also reduce PLL to 1.80v, dont need to mess with it tbh.
sorry mate I will chose not to trust you cause your first sentece shows lack of basic knowledge:

all i7 9xx processors are rated 0.8-1.375. Period
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
post #6 of 10
hmm okay then ill take my years of experience else where....

Point was Intel rates your i7 to function at a certain voltage within that range, hence that is your Voltage Spec, and that is the stock Vcore the Mobo will apply, yet you chose to raise that to 1.32v.

Id also like to say im an electronic engineering student, i do know what im talking about.
Edited by jasjeet - 5/14/11 at 11:25am
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
post #7 of 10
Thread Starter 
Quote:
Originally Posted by jasjeet View Post
hmm okay then ill take my years of experience else where....

Id also like to say im an electronic engineering student, i do know what im talking about.
Ok I am really sorry if I sounded rude. However the 'lol' at the end of phrase was not the best thing to write; especially after wrong info.
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
post #8 of 10
Quote:
Originally Posted by traxevc View Post
sorry mate I will chose not to trust you cause your first sentece shows lack of basic knowledge:

all i7 9xx processors are rated 0.8-1.375. Period
Um from what I see he is giving you good advice, and very well explained IMO.

Thanks, Sir Overkill.
RIGIE
(13 items)
 
  
CPUMotherboardGraphicsRAM
990X 4.5GHz 24/7 GA-X58A-UD9 4X EVGA SC 580 in SLI Dominator GT (3x2Gb)2000 
Hard DriveOSMonitorKeyboard
OCZ 120GB SSD/WD 27" 32" Logitech MX 5500 
PowerCaseMouseMouse Pad
Antec Quattro 1200W OC Lian-Li PC-P80 Logitech None 
  hide details  
Reply
RIGIE
(13 items)
 
  
CPUMotherboardGraphicsRAM
990X 4.5GHz 24/7 GA-X58A-UD9 4X EVGA SC 580 in SLI Dominator GT (3x2Gb)2000 
Hard DriveOSMonitorKeyboard
OCZ 120GB SSD/WD 27" 32" Logitech MX 5500 
PowerCaseMouseMouse Pad
Antec Quattro 1200W OC Lian-Li PC-P80 Logitech None 
  hide details  
Reply
post #9 of 10
I like linx for cpu stress.
Up core volts. IM @ 1.2785 930 cpu tho.
also whats the specs on ram volts. 1.65? set to that.
I dont know if your 2 stick of ram @ 4 gb each is messing with it.
Dyslexia
(16 items)
 
  
Reply
Dyslexia
(16 items)
 
  
Reply
post #10 of 10
Thread Starter 
Quote:
Originally Posted by GfhTattoo View Post
I like linx for cpu stress.
Up core volts. IM @ 1.2785 930 cpu tho.
also whats the specs on ram volts. 1.65? set to that.
I dont know if your 2 stick of ram @ 4 gb each is messing with it.
I also have a feeling my Ram is not really up to the task. However I do think I've got an average, or above, i7 950 batch. I have realised it is a bit vain to base your settings on other people's experiences. Most people who are demonstrating their successful settings in forums etc they have above average batches; perhaps this is the reason they feel like demonstrating them ! I would not demonstrate an OC which needs 1.3v to post @ 3.8ghz (this is just an example). I feel though that most i7's are like this and this constitute the average. Looking at the i7 4ghz club entries it makes me feel that all those guys have golden chips. Maybe a more accurate title would be 'i7 golden chip club'

I wish I had a chip like those though

THanks for all inputs and I apologise again if I offended anyone
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
Polypragmon
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4Ghz @ 1.34 Asus P6X58D-e MSI twin frozrii GTX 470 Corsair Dominator 3 x 2GB 
Hard DriveOptical DriveOSMonitor
c300 crucial + 3 SATA's DVD-RW (LG) windows 7 x64 enterprise sp1 17'' monitor 1280x1024 max res 
PowerCase
XFX 750w pro series antec 100 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i7 950 @ 4Ghz please help!!