Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Plextor SSD
New Posts  All Forums:Forum Nav:

Plextor SSD

post #1 of 5
Thread Starter 
Is anyone with a Plextor SSD getting the error "The device, \\Device\\Ide\\iaStor0, did not respond within the timeout period." in event viewer and get a freeze/lockup for 30 seconds to a minute (while the hard drive LED is constantly on) after installing the latest Intel RST/AHCI drivers?
post #2 of 5
any firmware update for it?
post #3 of 5
Thread Starter 
Yes, I updated the firmware to the latest and still getting the same error. If someone has a Plextor SSD please post which motherboard you are using and if you have the freezing problem. In order for the error message to appear in the Event Viewer you have to wait out the freeze. It takes about 30 seconds to a minute for the freeze to go away until you have a responsive system again.
Edited by mrwalker - 5/17/11 at 10:38am
post #4 of 5
Thread Starter 
anyone?
post #5 of 5
Thread Starter 
Still wondering if anyone has encountered this issue.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: SSD
Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Plextor SSD