Overclock.net › Forums › AMD › AMD CPUs › Fed up with the heat.... 1055T @ 71C
New Posts  All Forums:Forum Nav:

Fed up with the heat.... 1055T @ 71C - Page 5

post #41 of 80
What fans are you using on that rad? The RS series of rads need fast fans. The RX series need slow-medium speed fans. In both cases, static pressure plays a big role.

The 240mm rads (either one) should do the job is you only have the CPU on it. If you have any other components, the RS240 will struggle to keep things cool. The RX240 is just barely enough for a CPU/GPU loop and most people just go with the 360 series of rads then.
post #42 of 80
If your fed up with that, My Tri-core can beat your 70c/71c temp cause it also hits 70c temp with only 3 cores, on stock.
   
Beautiful Card, Plays Great
Msi GeForce GTX 560 Ti (Fermi) N560GTX-TI Twin Frozr II/OC Video Card
CPUMotherboardGraphicsRAM
Intel Core i5 3550 MSI Z77A-G45 MSI N560-GTX Ti Twin Frozr II OC Corsair Vengeance 8GB DDR3-1600 
Hard DriveCoolingOSMonitor
1x 1 Hitachi 1TB 7200rpm // 1x 500gb Seagate 72... Scythe Ninja 3 Push-Pull Windows 8 Pro 64-bit // (Win7 Dualboot) LG 27" IPS277L 
KeyboardPowerCase
Razer BlackWidow Corsair TX650M Corsair Carbide 400R 
CPUMotherboardGraphics
Intel Core Duo T2350 30B2 Mobile Intel(R) 945 Express Chipset Family 
  hide details  
Reply
   
Beautiful Card, Plays Great
Msi GeForce GTX 560 Ti (Fermi) N560GTX-TI Twin Frozr II/OC Video Card
CPUMotherboardGraphicsRAM
Intel Core i5 3550 MSI Z77A-G45 MSI N560-GTX Ti Twin Frozr II OC Corsair Vengeance 8GB DDR3-1600 
Hard DriveCoolingOSMonitor
1x 1 Hitachi 1TB 7200rpm // 1x 500gb Seagate 72... Scythe Ninja 3 Push-Pull Windows 8 Pro 64-bit // (Win7 Dualboot) LG 27" IPS277L 
KeyboardPowerCase
Razer BlackWidow Corsair TX650M Corsair Carbide 400R 
CPUMotherboardGraphics
Intel Core Duo T2350 30B2 Mobile Intel(R) 945 Express Chipset Family 
  hide details  
Reply
post #43 of 80
i agree with whiteslashasian, it does sound like a flow problem. i mean i have a x6 1100T and max temp is 34C with average ambient at 25C to 29C and i have a 240 rad. now if ur pump is burning up dude to flow problems that could cause the high temps. or it could be cause of the possible bad lap. i would check to make sure that you dont have a clog in ur rad or pump
The Obsidian
(16 items)
 
Mini Beast
(11 items)
 
Slience
(8 items)
 
CPUMotherboardGraphicsGraphics
Phenom II X6 1100T 4.4Ghz Msi 790FX-GD70 XFX Radeon 6970 2GB in CrossFire XFX Radeon 6970 2GB in CrossFire 
RAMHard DriveHard DriveOptical Drive
Crucial Ballistics Tracer DDR3-1600 OCZ Revo Drive HITACHI Deskstar Lite-On 22x DVD bruner 
CoolingOSMonitorKeyboard
Custom Water Cooling Windows 7 Enterperise 64-Bit 3x Asus 24" LED LCD in Eyefinity (5760x1080) Logitech G-15 
PowerCaseMouseMouse Pad
Corsair HX 850W Corsair Obsidian 800D Razer Mamba Razer Destruction 
CPUMotherboardRAMHard Drive
Intel Core i5-2405S ASRock Z68M-ITX/HT PNY Optima DDR-3 1333 Crucial CT 
Hard DriveHard DriveOptical DriveOS
Segate Barracuda 7.2K Samsung 5.4K SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 
KeyboardPowerCase
i-rocks KR-6402-BK Black USB Mini Keyboard Antec TruePower TP-650 650W LIAN LI PC-Q08B 
CPUMotherboardRAMHard Drive
AMD E-350 APU ASUS E35M1-I DELUXE Fusion  Patriot Signature DDR-3 1600 Seagate Momentus 
Hard DriveOptical DriveOSCase
OCZ Vertex 2 SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 Habey EMC-800B 
  hide details  
Reply
The Obsidian
(16 items)
 
Mini Beast
(11 items)
 
Slience
(8 items)
 
CPUMotherboardGraphicsGraphics
Phenom II X6 1100T 4.4Ghz Msi 790FX-GD70 XFX Radeon 6970 2GB in CrossFire XFX Radeon 6970 2GB in CrossFire 
RAMHard DriveHard DriveOptical Drive
Crucial Ballistics Tracer DDR3-1600 OCZ Revo Drive HITACHI Deskstar Lite-On 22x DVD bruner 
CoolingOSMonitorKeyboard
Custom Water Cooling Windows 7 Enterperise 64-Bit 3x Asus 24" LED LCD in Eyefinity (5760x1080) Logitech G-15 
PowerCaseMouseMouse Pad
Corsair HX 850W Corsair Obsidian 800D Razer Mamba Razer Destruction 
CPUMotherboardRAMHard Drive
Intel Core i5-2405S ASRock Z68M-ITX/HT PNY Optima DDR-3 1333 Crucial CT 
Hard DriveHard DriveOptical DriveOS
Segate Barracuda 7.2K Samsung 5.4K SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 
KeyboardPowerCase
i-rocks KR-6402-BK Black USB Mini Keyboard Antec TruePower TP-650 650W LIAN LI PC-Q08B 
CPUMotherboardRAMHard Drive
AMD E-350 APU ASUS E35M1-I DELUXE Fusion  Patriot Signature DDR-3 1600 Seagate Momentus 
Hard DriveOptical DriveOSCase
OCZ Vertex 2 SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 Habey EMC-800B 
  hide details  
Reply
post #44 of 80
Quote:
Originally Posted by trevorb05 View Post
i agree with whiteslashasian, it does sound like a flow problem. i mean i have a x6 1100T and max temp is 34C with average ambient at 25C to 29C and i have a 240 rad. now if ur pump is burning up dude to flow problems that could cause the high temps. or it could be cause of the possible bad lap. i would check to make sure that you dont have a clog in ur rad or pump
I agree with me too!

Also, tubing doesn't like to get very hot either...sometimes you lose a lot of your plasticizer and end up with cruddy tubing that needs to be replaced...

I don't like top mount rads simply because they're harder than usual to bleed the air out of. I think running the loop (loop only if you can) with the case on its side and holding the res/pump up as the highest point should help to force any trapped air out of the rad.
    
CPUMotherboardGraphicsRAM
Intel Core i5 2500k GIGABYTE GA-Z68XP-UD4 Sapphire HD 6950 2GB Mushkin Enhanced Blackline 8GB 1600 
Hard DriveHard DriveOptical DriveOS
ADATA S599 Samsung Spinpoint T NEC DVD-RW W7 
MonitorMonitorPowerCase
Dell 2007wfp Dell 2007wfp 1000w Ultra X3 Lian Li PC-V2000b Plus II 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5 2500k GIGABYTE GA-Z68XP-UD4 Sapphire HD 6950 2GB Mushkin Enhanced Blackline 8GB 1600 
Hard DriveHard DriveOptical DriveOS
ADATA S599 Samsung Spinpoint T NEC DVD-RW W7 
MonitorMonitorPowerCase
Dell 2007wfp Dell 2007wfp 1000w Ultra X3 Lian Li PC-V2000b Plus II 
  hide details  
Reply
post #45 of 80
I would suggest going to finer grit sandpaper. Like mentioned earlier, 600 grit is still a little "rough" for this application. I would also use a square or micrometer to measure for even thickness of the block(s) in question.

I also suggest checking your radiators for a buildup of dust which can slowly decrease air flow, increasing temperatures. Check your push/pull fans for correct RPM. It may be possible that one or more fans have dropped in speed due to dust buildup or simply from use.

Again I also suggest flushing your loop in an attempt to remove any possible build up in the loop.

Possibly the pump has weakened from build up or use.

It looks like you have performed some of these checks already. These are just suggestions what I would personally do.

On an additional note, I remember you saying that the temperature had increased slowly over different tests. Where these tests performed on different days/time of day? Was the ambient temperature cooler on the first test then the later?

I hope you get it figured out.
RedLine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 970 Asus Rampage III Extreme (X2) Nvidia GeForce GTX 580 Superclocked Corsair Memory Dominator GT 12 GB 
Hard DriveOptical DriveOSMonitor
(X2) Western Digital Caviar Black 1 TB (X2) ASUS Blu Ray Disc Writer Windows 7 Ultimate 64 Bit (X3) ASUS VG236HE 23-Inch LCD 
KeyboardPowerCaseMouse
Logitech G19 Ultra X4 1200 Watt Azza Huricane 2000R Logitech G9 
  hide details  
Reply
RedLine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 970 Asus Rampage III Extreme (X2) Nvidia GeForce GTX 580 Superclocked Corsair Memory Dominator GT 12 GB 
Hard DriveOptical DriveOSMonitor
(X2) Western Digital Caviar Black 1 TB (X2) ASUS Blu Ray Disc Writer Windows 7 Ultimate 64 Bit (X3) ASUS VG236HE 23-Inch LCD 
KeyboardPowerCaseMouse
Logitech G19 Ultra X4 1200 Watt Azza Huricane 2000R Logitech G9 
  hide details  
Reply
post #46 of 80
Quote:
Originally Posted by Atomfix View Post
All will be inspected later, Going to rip apart the block, res will be dismantled, flushed with vinegar etc, going to use a high psi jet blast of water in the radiator to make sure there are no blockages etc...

Maximum service for this poor W/C xD

The Northbridge Project now signing off, Will report back later on tonight (GMT) and will let you know the results
You can't dismantle the res, it's glued.
Sane
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K @ 4.9Ghz 1.46V ASUS Rampage IV Formula ASUS GTX780 1176Mhz 1.187V 16GB GeIL Enhance Corsa 1600Mhz CL9 
Hard DriveCoolingCoolingCooling
Samsung 256GB 830 EK Supremacy Nickel-Plexi XSPC RS360 XSPC RX240 
CoolingOSMonitorKeyboard
5x Scythe Gentle Typhoon AP-15 Windows 8 Pro x64 Asus VE228T Logitech G19s 
PowerCaseMouse
Corsair HX850 NZXT Phantom 630 Razor Abyssus 
  hide details  
Reply
Sane
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K @ 4.9Ghz 1.46V ASUS Rampage IV Formula ASUS GTX780 1176Mhz 1.187V 16GB GeIL Enhance Corsa 1600Mhz CL9 
Hard DriveCoolingCoolingCooling
Samsung 256GB 830 EK Supremacy Nickel-Plexi XSPC RS360 XSPC RX240 
CoolingOSMonitorKeyboard
5x Scythe Gentle Typhoon AP-15 Windows 8 Pro x64 Asus VE228T Logitech G19s 
PowerCaseMouse
Corsair HX850 NZXT Phantom 630 Razor Abyssus 
  hide details  
Reply
post #47 of 80
For sure the rad can get hot if it cannot dissapate the heat properly, is not a flow problem

I tested my CPU @ 4Ghz, with the CPU and a full coverage MB block running through a BI GTX 120mm (pretty much equal to a thin 240), and after 30 min of prime the Rad was HOT to the touch. Had nothing to do with flow, was just the rad couldn't dump the heat fast enough. Once the 360 was installed, no more heat issues



results:

Quote:
Originally Posted by Phobos223 View Post
Frequencies:
CPU @ 4104 Mhz (304*13.5)
NB @ 3040 Mhz
RAM @ ~1625Mhz

Voltages:
CPU @ 1.48V
CPU/NB @ ~1.35V (approx. can't remember exactly but darn close)
NB @ 1.30V
SB @ 1.2V
RAM @ 1.65V


And the results were as follows.... Keep in mind this was just with the single 120mm rad and it was HOT in my house last night... ambient was around 80F/26C the entire time (nasty here in StL this week!) Also, the fan on the rad is 1800rpm/~85CFM

Idle:
CPU @ 35C
NB @ 40C
SB @ 30C

Load (prime95 full blast for ~45 - 60min)
CPU @ 63C
NB @ 50C
SB @ ~37C (cant remember exactly but wasn't over 40)
Sweaty Box
(10 items)
 
Stacker T01 v5.0
(10 items)
 
Sturbin' Box
(13 items)
 
CPUMotherboardGraphicsRAM
i7 5960X ASUS Rampage V Extreme 2x Nvidia 1080ti SLI 32GB Corsair Dominator DDR4 3400Mhz 
Hard DriveCoolingOSMonitor
Samsung 850 pro NVMe M.2 Custom EK watercooled loop Windows 10 Pro Triple LG 4K 27" 
PowerCase
Cosair 1500Ti CaseLabs M10 
CPUMotherboardGraphicsRAM
Delidded i7 3770K @ 5Ghz ASUS Maximus V Gene EVGA GTX 670 SLI - Heatkiller Blocks 16GB Corsair Vengeance DDR3 @ 2400Mhz 
Hard DriveCoolingOSMonitor
Samsung 840 EVO Custom Loop - EK Supreme HF Windows 7 Pro 64-bit Dell 30" + 2 x Dell 24" 
PowerCase
Sparkle Gold 1200W CM Stacker T01 
CPUMotherboardGraphicsRAM
Phenom II X6 1055T @4.0GHz (308x13) / 3.08GHz NB ASUS Crosshair IV Formula w/EK full coverage block ATI 5870x2 Crossfired @ 950/1250 8GB Corsair Vengeance DDR3 1600 
Hard DriveCoolingOSMonitor
OCZ Vertex 3 SSD Swifttech Apogee Drive Block/Pump Windows 7 64bit Pro ASUS 27" LCD 
PowerCase
Corsair Professional Series Gold 650W  Lian-Li PC-650A 
  hide details  
Reply
Sweaty Box
(10 items)
 
Stacker T01 v5.0
(10 items)
 
Sturbin' Box
(13 items)
 
CPUMotherboardGraphicsRAM
i7 5960X ASUS Rampage V Extreme 2x Nvidia 1080ti SLI 32GB Corsair Dominator DDR4 3400Mhz 
Hard DriveCoolingOSMonitor
Samsung 850 pro NVMe M.2 Custom EK watercooled loop Windows 10 Pro Triple LG 4K 27" 
PowerCase
Cosair 1500Ti CaseLabs M10 
CPUMotherboardGraphicsRAM
Delidded i7 3770K @ 5Ghz ASUS Maximus V Gene EVGA GTX 670 SLI - Heatkiller Blocks 16GB Corsair Vengeance DDR3 @ 2400Mhz 
Hard DriveCoolingOSMonitor
Samsung 840 EVO Custom Loop - EK Supreme HF Windows 7 Pro 64-bit Dell 30" + 2 x Dell 24" 
PowerCase
Sparkle Gold 1200W CM Stacker T01 
CPUMotherboardGraphicsRAM
Phenom II X6 1055T @4.0GHz (308x13) / 3.08GHz NB ASUS Crosshair IV Formula w/EK full coverage block ATI 5870x2 Crossfired @ 950/1250 8GB Corsair Vengeance DDR3 1600 
Hard DriveCoolingOSMonitor
OCZ Vertex 3 SSD Swifttech Apogee Drive Block/Pump Windows 7 64bit Pro ASUS 27" LCD 
PowerCase
Corsair Professional Series Gold 650W  Lian-Li PC-650A 
  hide details  
Reply
post #48 of 80
The reason to get a mirror shine when lapping is to make it even flatter. It's shiny because it's almost 100% flat.

What TIM are you using? I saved 10 degrees by using mx4. If you're using the stuff that came with the RASA kit, that's your problem. It's terrible.
post #49 of 80
what is in your loop? just cpu or video cards too? if you have other parts in your loop just for test purposes only have your cpu to see if it make any difference. you have to eliminate all other parts to help point to you cause of the heat!
The Obsidian
(16 items)
 
Mini Beast
(11 items)
 
Slience
(8 items)
 
CPUMotherboardGraphicsGraphics
Phenom II X6 1100T 4.4Ghz Msi 790FX-GD70 XFX Radeon 6970 2GB in CrossFire XFX Radeon 6970 2GB in CrossFire 
RAMHard DriveHard DriveOptical Drive
Crucial Ballistics Tracer DDR3-1600 OCZ Revo Drive HITACHI Deskstar Lite-On 22x DVD bruner 
CoolingOSMonitorKeyboard
Custom Water Cooling Windows 7 Enterperise 64-Bit 3x Asus 24" LED LCD in Eyefinity (5760x1080) Logitech G-15 
PowerCaseMouseMouse Pad
Corsair HX 850W Corsair Obsidian 800D Razer Mamba Razer Destruction 
CPUMotherboardRAMHard Drive
Intel Core i5-2405S ASRock Z68M-ITX/HT PNY Optima DDR-3 1333 Crucial CT 
Hard DriveHard DriveOptical DriveOS
Segate Barracuda 7.2K Samsung 5.4K SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 
KeyboardPowerCase
i-rocks KR-6402-BK Black USB Mini Keyboard Antec TruePower TP-650 650W LIAN LI PC-Q08B 
CPUMotherboardRAMHard Drive
AMD E-350 APU ASUS E35M1-I DELUXE Fusion  Patriot Signature DDR-3 1600 Seagate Momentus 
Hard DriveOptical DriveOSCase
OCZ Vertex 2 SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 Habey EMC-800B 
  hide details  
Reply
The Obsidian
(16 items)
 
Mini Beast
(11 items)
 
Slience
(8 items)
 
CPUMotherboardGraphicsGraphics
Phenom II X6 1100T 4.4Ghz Msi 790FX-GD70 XFX Radeon 6970 2GB in CrossFire XFX Radeon 6970 2GB in CrossFire 
RAMHard DriveHard DriveOptical Drive
Crucial Ballistics Tracer DDR3-1600 OCZ Revo Drive HITACHI Deskstar Lite-On 22x DVD bruner 
CoolingOSMonitorKeyboard
Custom Water Cooling Windows 7 Enterperise 64-Bit 3x Asus 24" LED LCD in Eyefinity (5760x1080) Logitech G-15 
PowerCaseMouseMouse Pad
Corsair HX 850W Corsair Obsidian 800D Razer Mamba Razer Destruction 
CPUMotherboardRAMHard Drive
Intel Core i5-2405S ASRock Z68M-ITX/HT PNY Optima DDR-3 1333 Crucial CT 
Hard DriveHard DriveOptical DriveOS
Segate Barracuda 7.2K Samsung 5.4K SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 
KeyboardPowerCase
i-rocks KR-6402-BK Black USB Mini Keyboard Antec TruePower TP-650 650W LIAN LI PC-Q08B 
CPUMotherboardRAMHard Drive
AMD E-350 APU ASUS E35M1-I DELUXE Fusion  Patriot Signature DDR-3 1600 Seagate Momentus 
Hard DriveOptical DriveOSCase
OCZ Vertex 2 SAMSUNG 8X Slim DVD Burner Windows 7 Enterprise x64 Habey EMC-800B 
  hide details  
Reply
post #50 of 80
Phobos, your old loop =/= Atom's loop.

I'd argue that a even a thin 240 with fans in push/pull would outperform (though not by a whole lot) that 120 with a single fan.

Even if they did perform the same, you had your CPU running MUCH higher voltages and had a mobo block which is restrictive and adds a good amount of heat (OC'd and voltage bump to the NB as well?) to the loop.

I maintain that a 240 rad w/ fans in push/pull in a CPU only loop, mild OC and VCore bump, should not cause the water and rad to become that hot under optimal operational conditions at load. I think blockage or air pockets in the rad are the culprit here.
    
CPUMotherboardGraphicsRAM
Intel Core i5 2500k GIGABYTE GA-Z68XP-UD4 Sapphire HD 6950 2GB Mushkin Enhanced Blackline 8GB 1600 
Hard DriveHard DriveOptical DriveOS
ADATA S599 Samsung Spinpoint T NEC DVD-RW W7 
MonitorMonitorPowerCase
Dell 2007wfp Dell 2007wfp 1000w Ultra X3 Lian Li PC-V2000b Plus II 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5 2500k GIGABYTE GA-Z68XP-UD4 Sapphire HD 6950 2GB Mushkin Enhanced Blackline 8GB 1600 
Hard DriveHard DriveOptical DriveOS
ADATA S599 Samsung Spinpoint T NEC DVD-RW W7 
MonitorMonitorPowerCase
Dell 2007wfp Dell 2007wfp 1000w Ultra X3 Lian Li PC-V2000b Plus II 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Fed up with the heat.... 1055T @ 71C