so.. no timelapse. i had to leave suddenly during the taping and it is just all messed up Ugh...
Thanks Lutro for the availability of the MDPCx sleeving!
Here we are, i didnt measure it so i hope lutro sent me the right amount... hehe
orange connectors, 100 ft White Small MDPCx, 50 ft Orange Small MDPCx, and 75 precut White heatshrink. And a digital Heatgun
For my first time sleeving... EVER.. i like how it came out. I can see a little of the black under the white but it is acceptable.
After a long time.... i finished the 24 pin and 8 pin on the non modular part. Had to cut the hole a little larger for the extra size.
After getting everything together... It looks like a mess back here. I know i mixed it with black sleeving BUT the black sleeving is always located in the shadows, aka behind the fan contoller/ etc.
Also the metal plate i added is SO helpful because i dont know where i would have put all these wires.
Hmm hsf.... dont mind the orange scribbles... i was trying something and failed miserablly... Im going to remove it later.
The orange connectors really show on the GPU, alot better than having black ones.
All lit up. Notice the metal plate that hides the cables. It works so well!
And the side panel on.
also the 120mm blow hole that is positioned on the cpu backplate, i finally got all the side panels on and there is a considerable amount of air coming out of it. I'm happy with this airflow and im not going to add a fan.
Im going to be adding a few fan grills, such as on the psu and rear intake. But thanks for looking, Ikem