I had to take my rig apart. Once I Put it all back together, Ran all my tests and works great. Before I did this, I was getting, Read 430 and write 200 with my Intel SSD. Now its 350 read and 120 write. I also notice its has "Safely remove hardware" at bottom right of screen, with BOTH my SSD and Cav Black that are using Sata III 6gbs. I know Im missed something with putting everything back together. I reset CMOS after I out everything back together. Changed IDE to AHCI and still low reads.
post #1 of 3
5/17/11 at 4:46am