Overclock.net › Forums › Industry News › Hardware News › [sweclockers] the new Corsair Hydro H100 and H80 Cpu Coolers
New Posts  All Forums:Forum Nav:

[sweclockers] the new Corsair Hydro H100 and H80 Cpu Coolers - Page 44

post #431 of 432
Quote:
Originally Posted by Matthousef1;14401644 
@CorsairGeorge

Which case will fit the H100 best according to, I presume, the testing of Corsair for the H100 ?
I tried to fit it in a Antec 1200 case to the 2 back case fans of 120mm, but no..that didn't work..have to do some modding to make more room in the case or drill holes in the top.
I want to create a push-pull setup.

If that doesn't work, I will probably end up either buying a case that will work with the H100 sizes

Every Corsair case works with the H100, as for other cases, your best bet is to go into the watercooling forums and look for guys with a 240mm radiator setup.

The Case forums are good, too, for people who post pics of their watercooled rigs.
post #432 of 432
Quote:
Originally Posted by CorsairGeorge;14414517 
Every Corsair case works with the H100, as for other cases, your best bet is to go into the watercooling forums and look for guys with a 240mm radiator setup.

The Case forums are good, too, for people who post pics of their watercooled rigs.

Well, actually, yesterday I made it fit in my case smile.gif

I looked at it with a friend of mine and with a little bit of adjusting holes and some work we got it fit in a push-pull configuration.
The fans don't line up exactly to eachother, but in essence it works.

Did a test of Prime95 Blend with my AMD 1090T @ 4.2ghz @ 1.488v (at load 1.512v) and the temp went after 1 hour to 52 degrees.
It's not a huge drop in temp in comparison to the S.Mugen 2 that I had, but it's better, that's for sure
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Hardware News
Overclock.net › Forums › Industry News › Hardware News › [sweclockers] the new Corsair Hydro H100 and H80 Cpu Coolers