Overclock.net › Forums › Graphics Cards › NVIDIA › Destroying gtx 560 Ti soon !!! Help .. Screws one come off, stipped etc..
New Posts  All Forums:Forum Nav:

Destroying gtx 560 Ti soon !!! Help .. Screws one come off, stipped etc..

post #1 of 23
Thread Starter 
Now i've bought some waterblocks for my gtx 560s. I'm installing one of them right now, AND THOSE FU**ING SCREWS AREN'T COMING OUT NO MATTER WHAT!!!

This is one of the most annoyings things i have ever encountered .. Just spend a ****load of $$ on my new watercooling setup, and i can't install it because some crappy softer-than-butter screws have been put into my card! I have tried all different kinds of screwdrivers, but there are approx. 4 screws that just aren't coming out.. And i of course ended up stripping them in my rage .. I'm so close to strapping the card to a giant flashpowder charge, record it blowing into a million pieces and play the movie using an ATI card ..

Any help would be appreciated ..
    
CPUGraphicsRAMHard Drive
I7 2600k Gtx 580 SLI - 1x Palit and 1x EVGA Ref. 8 Gigs of Kingston Hyperx 1600 mhz 1x OCZ Agility 3 120 gb, 1 HDD 1000 gb 
Optical DriveOSMonitorPower
Random crap .. :) Win 7 Ultimate x64 LG 23" Full HD monitor 1x Coolermaster GX750, and one LC power 550 
Case
Corsair 700d 
  hide details  
Reply
    
CPUGraphicsRAMHard Drive
I7 2600k Gtx 580 SLI - 1x Palit and 1x EVGA Ref. 8 Gigs of Kingston Hyperx 1600 mhz 1x OCZ Agility 3 120 gb, 1 HDD 1000 gb 
Optical DriveOSMonitorPower
Random crap .. :) Win 7 Ultimate x64 LG 23" Full HD monitor 1x Coolermaster GX750, and one LC power 550 
Case
Corsair 700d 
  hide details  
Reply
post #2 of 23
First of all, take it as a lesson learned and remember to use the correct sized screwdriver in the future.

As for getting them out (and you're sure you've stripped them to where a screwdriver won't work) I've always had the best luck removing a stripped screw using a drill with a really small bit. Just be careful or you could wreck the PCB.
SFF Goodness
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASRock z87m OC formula MSI GTX 780 GAMING 8GB G Skill Ripjaw DDR3 2400MHz 
Hard DriveHard DriveCoolingOS
SanDisk Extreme II 480 GB Seagate 2TB Noctua NH-D14 Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell U2312HM x3 Das Model S Professional Silverstone Strider Gold Evolution 750w Silverstone SG10 
MouseAudioAudioAudio
Logitech G500 Xfi Titanium HD Audioengine 5+ Velodyne Impact 12 
  hide details  
Reply
SFF Goodness
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASRock z87m OC formula MSI GTX 780 GAMING 8GB G Skill Ripjaw DDR3 2400MHz 
Hard DriveHard DriveCoolingOS
SanDisk Extreme II 480 GB Seagate 2TB Noctua NH-D14 Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell U2312HM x3 Das Model S Professional Silverstone Strider Gold Evolution 750w Silverstone SG10 
MouseAudioAudioAudio
Logitech G500 Xfi Titanium HD Audioengine 5+ Velodyne Impact 12 
  hide details  
Reply
post #3 of 23
Just drill the bastards. But watch out for the PCB
1155 POWER
(16 items)
 
AMD Heater
(13 items)
 
 
CPUMotherboardGraphicsGraphics
i5 2500k 4,6Ghz Asus Maximus IV Extreme Palit GTX 560 Ti Sonic Gigabyte GTX 560 Ti Overclocked 
RAMHard DriveHard DriveCooling
8GB G.Skill Sniper 1886MHz Seagate 500GB and Samsung 500GB Samsung 840 SSD Corsair H50 
OSMonitorKeyboardPower
Windows 7 Ultimate 64-bit BenQ XL2411Z Steelseries Merc Stealth Nox Apex 800w 
CaseMouseMouse Pad
Antec Lanboy Air Logitech G400s Steelseries Qck Mass 
CPUMotherboardGraphicsRAM
AMD 955 BE Asus Crosshair Formula II nVidia GTX 260 Core 216 55nm Kingston DDR2 4GB 800Mhz 
Hard DriveOptical DriveCoolingOS
Western Digital 500GB Some cheap thing (at least it's black) Modded AMD Stock Cooler Windows 7 Home Premium 32-bit 
MonitorPowerCaseMouse
Some Samsung. Corsair CX600 NZXT Tempest A4Tech X7 
Mouse Pad
Bundled Black Ops Mousepad lol 
CPUMotherboardGraphicsRAM
Intel i5-4210H MSI MS-16GF GTX 850M 8GB DDR3 
Hard DriveOptical DriveOSKeyboard
WDC WD5000 HL-DT-ST DVDRAN GTA0N Windows 8.1 by Steelseries 
Audio
Dynaudio 
  hide details  
Reply
1155 POWER
(16 items)
 
AMD Heater
(13 items)
 
 
CPUMotherboardGraphicsGraphics
i5 2500k 4,6Ghz Asus Maximus IV Extreme Palit GTX 560 Ti Sonic Gigabyte GTX 560 Ti Overclocked 
RAMHard DriveHard DriveCooling
8GB G.Skill Sniper 1886MHz Seagate 500GB and Samsung 500GB Samsung 840 SSD Corsair H50 
OSMonitorKeyboardPower
Windows 7 Ultimate 64-bit BenQ XL2411Z Steelseries Merc Stealth Nox Apex 800w 
CaseMouseMouse Pad
Antec Lanboy Air Logitech G400s Steelseries Qck Mass 
CPUMotherboardGraphicsRAM
AMD 955 BE Asus Crosshair Formula II nVidia GTX 260 Core 216 55nm Kingston DDR2 4GB 800Mhz 
Hard DriveOptical DriveCoolingOS
Western Digital 500GB Some cheap thing (at least it's black) Modded AMD Stock Cooler Windows 7 Home Premium 32-bit 
MonitorPowerCaseMouse
Some Samsung. Corsair CX600 NZXT Tempest A4Tech X7 
Mouse Pad
Bundled Black Ops Mousepad lol 
CPUMotherboardGraphicsRAM
Intel i5-4210H MSI MS-16GF GTX 850M 8GB DDR3 
Hard DriveOptical DriveOSKeyboard
WDC WD5000 HL-DT-ST DVDRAN GTA0N Windows 8.1 by Steelseries 
Audio
Dynaudio 
  hide details  
Reply
post #4 of 23
Quote:
Originally Posted by izz View Post
just drill the bastards. But watch out for the pcb
+1
post #5 of 23
Holy mother of god...drilling on that card...giving me the shivers !

Another thought - can you find tiny 'easy-outs' in your local hardware store? maybe after you drill a little hole in the screw head you can put one of them in there and then screw them out. Maybe you can tap one of them into the screw head by just manually twisting.
Wife's bane
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K @ 4.5 Ghz Gigabyte Z77 UD3H HIS R9-290 8 GB Samsung Wonder RAM 
Hard DriveHard DriveOptical DriveCooling
Crucial SSD for OS Samsung Spinpoint F3 Asus XSPC water block, 360 radiator, and 720 reservo... 
CoolingOSMonitorKeyboard
GPU cooling - XSPC Razer full GPU blocks Win 7 Home Premium Asus PB278Q 2560 X 1440p ISP Logitech G15 
PowerCaseMouseMouse Pad
NZXT Hale90 V2 NZXT Switch 810 Logitech G500 Steelseries QcK 
Audio
Optical out to Sony receiver; Deftech Monitor 3... 
  hide details  
Reply
Wife's bane
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K @ 4.5 Ghz Gigabyte Z77 UD3H HIS R9-290 8 GB Samsung Wonder RAM 
Hard DriveHard DriveOptical DriveCooling
Crucial SSD for OS Samsung Spinpoint F3 Asus XSPC water block, 360 radiator, and 720 reservo... 
CoolingOSMonitorKeyboard
GPU cooling - XSPC Razer full GPU blocks Win 7 Home Premium Asus PB278Q 2560 X 1440p ISP Logitech G15 
PowerCaseMouseMouse Pad
NZXT Hale90 V2 NZXT Switch 810 Logitech G500 Steelseries QcK 
Audio
Optical out to Sony receiver; Deftech Monitor 3... 
  hide details  
Reply
post #6 of 23
Quote:
Originally Posted by iZZ View Post
Just drill the bastards. But watch out for the PCB
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #7 of 23
dont get drill.... use a pair of small vice grips
under the radar
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k gigabyte ga-z68x-ud4-b3 MSI GTX 970 Gaming 4g 8gb corsair vengeance 
Hard DriveHard DriveHard DriveHard Drive
Plextor SSD samsung spinpoint f3 1TB samsung spinpoint f3 1TB Western Digital black 1TB 
CoolingOSMonitorKeyboard
silver arrow windows 7 ultimate 64bit samsung s23a950D Ducky shine 3 year of the snake 
PowerCaseMouseMouse Pad
Corsair AX1200 corsair 650D razer deathadder Steelseries QCK 
Audio
asus xonar essence stx 
  hide details  
Reply
under the radar
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k gigabyte ga-z68x-ud4-b3 MSI GTX 970 Gaming 4g 8gb corsair vengeance 
Hard DriveHard DriveHard DriveHard Drive
Plextor SSD samsung spinpoint f3 1TB samsung spinpoint f3 1TB Western Digital black 1TB 
CoolingOSMonitorKeyboard
silver arrow windows 7 ultimate 64bit samsung s23a950D Ducky shine 3 year of the snake 
PowerCaseMouseMouse Pad
Corsair AX1200 corsair 650D razer deathadder Steelseries QCK 
Audio
asus xonar essence stx 
  hide details  
Reply
post #8 of 23
Whatever you do, do not use a dremel. Pioneerisloud has had the same issue, and OCN came to the consensus that they should be cut w/ a dremel.

Personally, I've been able to extract damaged Phillips head screws using a small flat-head screw driver, either at an angle or by inserting into what's little left of the outer-most of the Phillips head. This has been most successful for me. The flat-head driver in a glasses repair kit is rather useful; can be had @ the 99cent store or your local wally world.

I'd try the pen trick 1st of the "extreme extraction measures". Get lighter and a cheapo pen you don't care about anymore. Melt/soften one end of the pen and shove it into the screw's head; hold it there until to cools, and then attempt to extract the screw. Edite/note: make sure the pen is of "BIC" style. The hard plastic of some other pens, especially the clear ones, will do you no good.

You can also try super-glue. put a minute drop of superglue IN the head of the screw(not around it, we don't want to glue the screw in) or on the tip of what you're inserting, and immediately stick either your screw driver end or the now screw-head molded pen you used in and hold it in place until it'll hold it's own weight, then let it dry for a lil bit. Then attempt extraction again.

There are also special extraction kits for extracting stripped head or broken-off head screws, but they're expensive, and are usually designed for much larger screw heads.

As a last resort I would drill it out. However, this carries the risks of slipping and damaging the PCB, damaging the threads, etc. I would use a very small titanium drill bit, then use a very slightly larger one, stick it in and attempt to reverse the screw out by using the grip from the slightly larger bit in the slightly smaller hole. You might even be able to do this w/ a drill bit and whatever bit of the head is remaining; try some different sized drill bits and see if any catch when going in a counter-clockwise motion.
Edited by DesertRat - 5/20/11 at 9:33am
post #9 of 23
You got to be gentle with the screws. You apply a little pressure, back off. Apply alittle pressure, back off, till the screws come loose otherwise your stripping them.
 
Gsvlip Dudyrm
(15 items)
 
Oda'maksv
(9 items)
 
CPUMotherboardGraphicsRAM
3770k @ 4.5 1.312 load Zotac Z77 ITX Wifi GTX 1070 Gaming 2126/2249 w/ Hybrid cooler TridentX 16GB 2400MHz 
Hard DriveHard DriveCoolingCooling
Samsung 850 Pro 1TB Seagate 2TB H105 EVGA Hybrid GPU cooler 
OSMonitorKeyboardPower
Windows 10 Asus MG279Q - 24" 144Hz 1080p Filco Majestic II w/ Cherry Reds Seasonic X 760W 
CaseMouseMouse PadAudio
Bitfelix Prodigy Logitech G400 Razer Goliath AKG A701 
AudioAudio
JDS Labs Objective 2 JDS Labs ODAC 
CPUMotherboardGraphicsRAM
Core i5 750 3.99 (190x21) 1.376v Load ASUS P7P55d-E Pro GTX 670 FTW <- Poor overclocker :( 8GB (4x2GB) G.Skill DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 830 Evo 128GB 2x 2TB  Some DVD drive OSX 10.10.4 
MonitorPowerCaseMouse
Asus 1080P Crap TX 750 HAF 922 G400s 
Mouse PadOther
Apple Keyboard Xbox One controler 
CPURAMHard DriveHard Drive
C2D 2,26GHz under volted @ .978v 8GB  Crucial M4 64GB SSD 500GB Scorpio Black 
OSMonitorKeyboardMouse
OS X 10.0 1280x800 Built-in Trackpad 
Audio
Built-in 
  hide details  
Reply
 
Gsvlip Dudyrm
(15 items)
 
Oda'maksv
(9 items)
 
CPUMotherboardGraphicsRAM
3770k @ 4.5 1.312 load Zotac Z77 ITX Wifi GTX 1070 Gaming 2126/2249 w/ Hybrid cooler TridentX 16GB 2400MHz 
Hard DriveHard DriveCoolingCooling
Samsung 850 Pro 1TB Seagate 2TB H105 EVGA Hybrid GPU cooler 
OSMonitorKeyboardPower
Windows 10 Asus MG279Q - 24" 144Hz 1080p Filco Majestic II w/ Cherry Reds Seasonic X 760W 
CaseMouseMouse PadAudio
Bitfelix Prodigy Logitech G400 Razer Goliath AKG A701 
AudioAudio
JDS Labs Objective 2 JDS Labs ODAC 
CPUMotherboardGraphicsRAM
Core i5 750 3.99 (190x21) 1.376v Load ASUS P7P55d-E Pro GTX 670 FTW <- Poor overclocker :( 8GB (4x2GB) G.Skill DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 830 Evo 128GB 2x 2TB  Some DVD drive OSX 10.10.4 
MonitorPowerCaseMouse
Asus 1080P Crap TX 750 HAF 922 G400s 
Mouse PadOther
Apple Keyboard Xbox One controler 
CPURAMHard DriveHard Drive
C2D 2,26GHz under volted @ .978v 8GB  Crucial M4 64GB SSD 500GB Scorpio Black 
OSMonitorKeyboardMouse
OS X 10.0 1280x800 Built-in Trackpad 
Audio
Built-in 
  hide details  
Reply
post #10 of 23
Quote:
Originally Posted by DesertRat View Post
Whatever you do, do not use a dremel. Pioneerisloud has had the same issue, and OCN came to the consensus that they should be cut w/ a dremel.

Personally, I've been able to extract damaged Phillips head screws using a small flat-head screw driver, either at an angle or by inserting into what's little left of the outer-most of the Phillips head. This has been most successful for me. The flat-head driver in a glasses repair kit is rather useful; can be had @ the 99cent store or your local wally world.

I'd try the pen trick 1st of the "extreme extraction measures". Get lighter and a cheapo pen you don't care about anymore. Melt/soften one end of the pen and shove it into the screw's head; hold it there until to cools, and then attempt to extract the screw. Edite/note: make sure the pen is of "BIC" style. The hard plastic of some other pens, especially the clear ones, will do you no good.

You can also try super-glue. put a minute drop of superglue IN the head of the screw(not around it, we don't want to glue the screw in) or on the tip of what you're inserting, and immediately stick either your screw driver end or the now screw-head molded pen you used in and hold it in place until it'll hold it's own weight, then let it dry for a lil bit. Then attempt extraction again.

There are also special extraction kits for extracting stripped head or broken-off head screws, but they're expensive, and are usually designed for much larger screw heads.

As a last resort I would drill it out. However, this carries the risks of slipping and damaging the PCB, damaging the threads, etc. I would use a very small titanium drill bit, then use a very slightly larger one, stick it in and attempt to reverse the screw out by using the grip from the slightly larger bit in the slightly smaller hole. You might even be able to do this w/ a drill bit and whatever bit of the head is remaining; try some different sized drill bits and see if any catch when going in a counter-clockwise motion.
+1 on the super glue, I have had good luck with that method. Use a vice or something to hold it steady while you wait for the glue to dry though! A

Also, make sure you are able to hold the card securely and apply enough downward pressure!
For sale
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 Asus P6T Deluxe Asus GTX460 TOP 768mb G Skill ECO 1600 CAS7 1.35V 
Hard DriveOptical DriveOSMonitor
2x Vertex 60 GB raid[0] Asus DVDRW W7,Ubuntu 2 xAsus VH236H 
KeyboardPowerCaseMouse Pad
Razer Ultra X3 1000W HAF 932 My Desk 
  hide details  
Reply
For sale
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 Asus P6T Deluxe Asus GTX460 TOP 768mb G Skill ECO 1600 CAS7 1.35V 
Hard DriveOptical DriveOSMonitor
2x Vertex 60 GB raid[0] Asus DVDRW W7,Ubuntu 2 xAsus VH236H 
KeyboardPowerCaseMouse Pad
Razer Ultra X3 1000W HAF 932 My Desk 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Destroying gtx 560 Ti soon !!! Help .. Screws one come off, stipped etc..