Overclock.net › Forums › AMD › AMD CPUs › 1090T Vcore issue higher in BIOS than CPUZ
New Posts  All Forums:Forum Nav:

1090T Vcore issue higher in BIOS than CPUZ

post #1 of 3
Thread Starter 
I have my system OC'd to 3.8 and in the BIOS I have the Vcore set to 1.44, when I run a blend session on Prime95 in CPUZ and AMD Overdrive my Vcore drops to 1.37-1.39. Putting the Vcore in bios at 1.44 is the only way to have it 100% stable. If I got 1 notch down to 1.375 on BIOS and run Prime95 after a hour a core or 2 may fail in blend and during that game CPUZ will show my Vcore at like 1.32-1.35. Is there any reasoning to why it would drop on 100% load compared to what the BIOS is giving, I thought it usually went up not down on 100% load sometimes.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD X6 1090T 3.8ghz Asus M4785TD-V EVO Radeon HD 4870 16gb 4x4gb Corsair Vengeance 1600 
OSPowerCase
Win7 64bit OCZ850GXS SLI Coolermaster Scout Storm 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD X6 1090T 3.8ghz Asus M4785TD-V EVO Radeon HD 4870 16gb 4x4gb Corsair Vengeance 1600 
OSPowerCase
Win7 64bit OCZ850GXS SLI Coolermaster Scout Storm 
  hide details  
Reply
post #2 of 3
look for a setting called Load Line calibration in your Bios and enable it to auto or find a setting that reduces it.
My motherboard does the same thing (but i don't have the setting)

current settings ::
BIOS: 1.475V
cpu-Z: 1.425V
Bender
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5-2500k @ 4.6Ghz Gigabyte Z68X-UD3H-B3 Sapphire AMD R9 290X Tri-X (1050/1300mhz)  EVGA GeForce GTX 1080 (How do you OC?) 
RAMHard DriveHard DriveOS
8GB 1600Mhz OCZ Vertex 3 240GB SSD OCZ Vertex 3 240GB SSD windows 10 64bit 
MonitorKeyboardPowerCase
Asus MG279Q Logitech G510  Corsair TX750 CM II 690 Advanced 
MouseMouse PadAudioAudio
CM Sentinel Advance  some big corsair one beyerdynamic DT 770 Pro 250 Ohm SoundBlaster Z Soundcard 
  hide details  
Reply
Bender
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5-2500k @ 4.6Ghz Gigabyte Z68X-UD3H-B3 Sapphire AMD R9 290X Tri-X (1050/1300mhz)  EVGA GeForce GTX 1080 (How do you OC?) 
RAMHard DriveHard DriveOS
8GB 1600Mhz OCZ Vertex 3 240GB SSD OCZ Vertex 3 240GB SSD windows 10 64bit 
MonitorKeyboardPowerCase
Asus MG279Q Logitech G510  Corsair TX750 CM II 690 Advanced 
MouseMouse PadAudioAudio
CM Sentinel Advance  some big corsair one beyerdynamic DT 770 Pro 250 Ohm SoundBlaster Z Soundcard 
  hide details  
Reply
post #3 of 3
Thread Starter 
Quote:
Originally Posted by th3illusiveman View Post
look for a setting called Load Line calibration in your Bios and enable it to auto or find a setting that reduces it.
My motherboard does the same thing (but i don't have the setting)

current settings ::
BIOS: 1.475V
cpu-Z: 1.425V
Just checked and Load Line was already set to Auto.. You can of course adjust it but I am not to familiar with that in adjusting it. It goes by percentages up to 100%. Any other suggestions?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD X6 1090T 3.8ghz Asus M4785TD-V EVO Radeon HD 4870 16gb 4x4gb Corsair Vengeance 1600 
OSPowerCase
Win7 64bit OCZ850GXS SLI Coolermaster Scout Storm 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD X6 1090T 3.8ghz Asus M4785TD-V EVO Radeon HD 4870 16gb 4x4gb Corsair Vengeance 1600 
OSPowerCase
Win7 64bit OCZ850GXS SLI Coolermaster Scout Storm 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › 1090T Vcore issue higher in BIOS than CPUZ