Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › The RoseArt (56K Warning)
New Posts  All Forums:Forum Nav:

The RoseArt (56K Warning)

post #1 of 3
Thread Starter 
My RoseArt Dell Briefcase


Built from the remains of a Dell 4600c desktop, this computer was the culmination of a very boring weekend. It's rocking a 3GHz with HT, 1MB L2 cache, 800MHz FSB Pentium 4 (from the Swap Meet, replaced the 2.53GHz, 512MB L2 cache, 533MHz FSB Pentium 4), the old 20GB SATA drive from my 360, onboard graphics, and 1GB of 333MHz DDR RAM . Don't judge my shoddy case cutting, I couldn't find my dad's dremel so I used a drill to make a bunch of small holes and then punched the plastic out I know, very professional. I am fully aware that it is a half-assed job.

Overview of the "case".



On the bottom right-hand corner is the power switch and in the center is a 120mm fan that supplies the heat monster of a CPU with air.




Inside the case is a Dell motherboard, my attempt at cable management, a 160W ITX PSU, and hanging from the top is a 2.5" 20GB SATA hard drive. I'm looking for a low-profile AGP card to use. I tested the GPU space with an old ATi Rage 128 Pro and the clearance is perfect. The case actually rests on top of the card .




A close-up of my cable management .




Close-up of XBOX 360 hard drive.



I/O panel and hole for CPU fan to expel hot air from (doesn't really work...).



The hole in the side to allow the PSU fan to breathe, and the power cable comes out the back.



The case is actually very portable. It's about 8-10 pounds and the handle makes it very easy to transport. It's weight distribution is a little off due to the PSU being heavier than all the other components, but it's manageable. I brought it to school on the Friday of our last full week of school. People were amazed by it and if I had a dollar for every person that called this entire thing the "hard drive" of the computer I could upgrade the hardware of this machine .
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
post #2 of 3
i would have drilled and cut the holes properly. I would have use a whole saw for the fan and trace the I/O plate and dremeled out the mobo holes or attached the I/O plate to the board and cut a rectangle in the plastic case to go around the ports letting the I/O plate fill in the empty spots.
Core 2 Haf
(16 items)
 
  
CPUMotherboardGraphicsRAM
C2Q Q9550 ASUS P5E3 Deluxe Wifi-AP GTX 480 Kingston HyperX DDR3 KHX1600C9D3K2/8G 
RAMHard DriveCoolingOS
PNY 1333 55gb, 320Gb, 500GB, 1TB Hyper 212 EVO Win 7 Ultimate 64bit 
OSOSPowerCase
Lubuntu 13.04 x64 OS X 10.8.5 TX750 Haf 912 
  hide details  
Reply
Core 2 Haf
(16 items)
 
  
CPUMotherboardGraphicsRAM
C2Q Q9550 ASUS P5E3 Deluxe Wifi-AP GTX 480 Kingston HyperX DDR3 KHX1600C9D3K2/8G 
RAMHard DriveCoolingOS
PNY 1333 55gb, 320Gb, 500GB, 1TB Hyper 212 EVO Win 7 Ultimate 64bit 
OSOSPowerCase
Lubuntu 13.04 x64 OS X 10.8.5 TX750 Haf 912 
  hide details  
Reply
post #3 of 3
Thread Starter 
Quote:
Originally Posted by cdoublejj View Post
i would have drilled and cut the holes properly. I would have use a whole saw for the fan and trace the I/O plate and dremeled out the mobo holes or attached the I/O plate to the board and cut a rectangle in the plastic case to go around the ports letting the I/O plate fill in the empty spots.
I still can't find the dremel. When I do I'm definitely going to re-cut the case properly though. When I tried cutting the hole for the fan, the plastic actually broke (that's why there's zip-ties holding parts of the case together). As for the I/O panel, it's built onto this tray thing in the Dell case. They do stupid things with their motherboards, but anyway I couldn't trace that part out.
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
Poison Ivy
(31 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K (4.4GHz @ 1.26V) ASRock Z77 Extreme6 EVGA GTX 980Ti ACX 2.0+ 8GB G.SKILL Trident X 2400MHz 
Hard DriveHard DriveCoolingCooling
256GB Samsung 850 Pro 256GB Samsung 840 Pro Rasa RS240 Phobya Xtreme 200mm Radiator 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Dell U2412M QNIX QX2710LED Leopold FC660M (MX Clears) 
PowerCaseMouseMouse Pad
Corsair AX850 Corsair 600T White Edition SteelSeries Rival Glorious PC Gaming Race Desk Pad 
AudioAudioAudioAudio
Sony STR-K900 Receiver Bic America F12 Sub Sennheiser HD600 Beyerdynamic DT 770 Pro 80 
AudioAudioAudioAudio
FiiO E7 Little Dot MKIII AntLion ModMic 4.0 ART DJPre2 Phono Preamp 
AudioAudioAudioOther
Technics SL-DL1 Turntable TEAC EQA-22 Equalizer Pioneer SP-BS22-LR Bookshelf Speakers Logitech G27 Racing Wheel 
OtherOtherOther
Planck Keyboard Carbon Keycap Set Mount-It! Dual Monitor Desk Mount 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › The RoseArt (56K Warning)