Originally Posted by xstasy
All this to cool a cpu, really?
*That high voltage drops to 1.44v under load. Stable with 2 runs of IntelBurnTest but I'm doing more tests of course. I don't see myself going over 3.6ghz with this budget board. I think 3.6 is quite a feat for a board with such bad vdroop and 4 power phases. I'm probably going to kill the thing.
...and a little picture.
50/50 antifreeze in hopes of keeping corrosion at bay for a while due to the nature of what I have in the water. A little algae prevention isn't bad either. I've heard people say it doesn't do anything to algae but they don't put barely any in there. My fluid is HALF antifreeze.
Ran the compressor for about 15 minutes(guess) until the cores on my CPU read -1 -1 -7 -7 and then noticed my block sweating. I kept going because it wasn't bad but it didn't seem to get below -1 -1 -7 -7 for some reason. Whatever I'm not complaining!
Here's 2 quick IBT runs @ those temperatures.
Edited by Khaotik55 - 6/10/11 at 5:01pm