Originally Posted by AKERSEKOMIS
I have the Hiper 680w mk2. I know they seem a little off but bios shows correct values, i never trust software for psu voltages. The pc wouldn't even boot with those values, let alone gaming and stressing. As i said before all is stable with overclocked settings but why does CnQ needs to be enabled? And why sometimes, after clearing cmos works as it should?
HWINFO64 is the best software for system monitoring out there to be honest and i had some difficulties with my board as well regarding the readings but all is well now.
sometimes a reset cmos doesn't work properly, what i mostly do is unplug the power cable and turn the power switch off. Than i hold the power button for about 10 seconds and start the machine up. I do this to be sure there is no power left in the components so when i start up i get "clean" power if you know what i mean.
I called and emailed Gigabyte and they send me a new BIOS, i couldn't see any difference but it made a small improvement in stability. I will go look if i can send it to you.
Try this BIOS:
990FXGAMING.zip 2768k .zip file
Edited by hurricane28 - 9/2/16 at 9:19am