Originally Posted by Hellsrage
My volts are 1.440 (or +.050) and with LLC on Normal it climbs to 1.488 when at 100% load, in a Prime95 test at around 10 mins the temp reached 64C and at that point I had a core fail. I'm using a XSPC Raystorm EX240 D5 variant for my CPU, I've got the stock fans on it and at max RPM.
As you can see I'm not even stable in Prime95, for gaming though it works and temps have yet to exceed 62C in any of my games.
It's set to auto for me.
Normal LLC is so erratic (Too low Minimum and Very wide Voltage Delta min to max). Try it at Regular or Ultra. 1.488 Volts will be +0.100 on Regular(at max) and Ultra will give you a max of 1.520 something. That's for me on UD3 rev 3. I'm still doing some testing regarding LLC Settings that might help.
But the Basics:
+0.050 Ultra and High > +0.050 Medium and Regular.
0.075 Regular and Medium > 0.050 Ultra and High.
There is about 0.020 Volts difference between the maximum readings that you can get from Ultra to Regular at same offsets.
+0.050 Extreme > +0.100 Regular (I will have to check again on this one. As I don't really use Extreme)
But it must be the chip mate. Mine would require too much Vcore too. Only that it happens at 4.8 and UP. Up to 4.5 I don't even need to add any Offsets. But need to bump to +0.100 to stabilize a 4.75. Depending on which combination I work with.
That cooler is so good to give you those temps as well.