Originally Posted by v1ral
How much is "some"?
If you know the case, I'll explain with words. Otherwise let me know and I'll post some pics of what I intend to do.
For the reservoir I will cut out a circular hole in the bottom front of the case (through the mesh) and anchor that reservoir to that. My Raid HDs will sit above that in the 3.5 bays.
The pumps will be beside the 3.5 bays in the back of the case so you don't see them at all, which is where the tubing will run for the most part (at least the black tubing for the behind the scenes work)
The 360 rad will sit on top of the case flush with top. I will cut three 120mm fan hole in the top of the case and I will cut the plastic tray on top so the Rad sits flush inside of it. The barbs will be facing down so that the tubing won't be seen. the fans will be inside of the case like normal.
The 120 rad I will mount on the back side of the case with the 120mm fan on the inside in it's usual spot.
I'll also have to drill some holes for tubing to pass in an out.
Let me know if you need pics.