Overclock.net › Forums › Intel › Intel CPUs › How to degrade a 2600K most effectivly?
New Posts  All Forums:Forum Nav:

How to degrade a 2600K most effectivly? - Page 6

post #51 of 171
Quote:
Originally Posted by XrOo View Post
How come some are getting their chips degraded when running 1.5 then?
Obviously it DOES something.

And if takes too long, I will just increase the voltage. But starting at 1.5V on stock speeds are OK.

It's HEAT vs VCORE.

Not 3.4Ghz@2.0 Volts and 150C@all cores. That's not gonna help out one bit (Sort of a joke, hah hah)
I say do how much heat it can handle first because high Voltage is most likely to do the damage, then do !.5v+ after you have seen what damage heat can do.

Thanks, Sir Overkill.
RIGIE
(13 items)
 
  
CPUMotherboardGraphicsRAM
990X 4.5GHz 24/7 GA-X58A-UD9 4X EVGA SC 580 in SLI Dominator GT (3x2Gb)2000 
Hard DriveOSMonitorKeyboard
OCZ 120GB SSD/WD 27" 32" Logitech MX 5500 
PowerCaseMouseMouse Pad
Antec Quattro 1200W OC Lian-Li PC-P80 Logitech None 
  hide details  
Reply
RIGIE
(13 items)
 
  
CPUMotherboardGraphicsRAM
990X 4.5GHz 24/7 GA-X58A-UD9 4X EVGA SC 580 in SLI Dominator GT (3x2Gb)2000 
Hard DriveOSMonitorKeyboard
OCZ 120GB SSD/WD 27" 32" Logitech MX 5500 
PowerCaseMouseMouse Pad
Antec Quattro 1200W OC Lian-Li PC-P80 Logitech None 
  hide details  
Reply
post #52 of 171
Most chips will take significantly more voltage than what is considered "safe" for extended periods of time.

I have run my Athlon II up to 1.8v, my e2160 up to 1.78v and I believe I took my Athlon X2 3600+ somewhere in the 1.6v+ range.

I do not run them at such voltages all the time, but the chips have never complained even running at 1.6v for extended periods of time.

There have been a few people to run 1.6v into the 45nm Core 2 series chips 24/7.
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 Gigabyte Aorus RX570, XFX RX570  G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 Gigabyte Aorus RX570, XFX RX570  G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
post #53 of 171
There are always different failure mechanisms like others have said, extreme voltage can cause breakdowns as can extreme temperature. However the main reduction in lifetime is usually based on electromigration where heat and temperature are both factors.

From wiki:
Quote:
Electromigration reliability of a wire (Black's equation)

At the end of the 1960s J. R. Black developed an empirical model to estimate the MTTF (mean time to failure) of a wire, taking electromigration into consideration:[2]

{MTTF} = A (J^{-n}) e^{{E_a}/{k T}}

Here A is a constant based on the cross-sectional area of the interconnect, J is the current density, Ea is the activation energy (e.g. 0.7 eV for grain boundary diffusion in aluminum), k is the Boltzmann's constant, T is the temperature and n a scaling factor (usually set to 2 according to Black). It is clear that current density J and (less so) the temperature T are deciding factors in the design process that affect electromigration.
I.E. temperature has an exponential effect and current has less of one. Current will increase with voltage and frequency as dynamic power = some constant x vcore^2xfrequency i.e. current = some constant x vcore x frequency. Because of the exponential factor of temperature this leads to the general theory of you are fine as long as your temps are in check and that higher voltages are safer with lower temperatures.

My suggestion:

Find the stability of a known good chip on the board. Then if I were you I would find your maximum stability point with an air cooler at 90C, up vcore one tick and then IBT until failure. After failure double check with the known good chip to make sure the chip has degraded and not the PSU/mobo vrm's. If proven that the chip degraded at 90C, you can then repeat at 95C. You then have two data points from which to back extract the factors in the equation however you have two unknowns - current density and the correction factor. The current density can be roughly estimated by using a killawatt and taking 2 data points - idle @ stock and loaded @ overclocked. The delta is very rough estimate the dynamic power.

This should be enough to give you a rough equation of mean time to failure into which people can plug their vcore, frequency and temps.
Edited by stren - 5/26/11 at 4:11pm
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
post #54 of 171
Quote:
Originally Posted by systemlayers View Post
No don't go outside of spec purposely that's stupid. I agree with OP's methods. Use 1.5v @ stock clocks and see if 1.5 voltage specifically does any damage. There are many who wonder what the 100% stable voltage is for sandy bridge and this could be a useful data point. This could be test 1 . Run it for at least a week. Test 2 if 1.5v passed a week or two fine under prime95 (might want to start a new thread on methods of which p95 to use) could be a heat test (keep computer in warm area and get temperatures around 90c for a week or two).
It would take years before 1.5v did ANY damage at stock. It's always the overclocks which get hurt first, unless the IMC gets damaged. You could probably fold 24/7 for one year at 1.5v load and the chip would keep working at stock as if nothing happened. Might still overclock to 4 ghz, too...
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
post #55 of 171
Quote:
Originally Posted by stren View Post
There are always different failure mechanisms like others have said, extreme voltage can cause breakdowns as can extreme temperature. However the main reduction in lifetime is usually based on electromigration where heat and temperature are both factors.

From wiki:


I.E. temperature has an exponential effect and current has less of one. Current will increase with voltage and frequency as dynamic power = some constant x vcore^2xfrequency i.e. current = some constant x vcore x frequency. Because of the exponential factor of temperature this leads to the general theory of you are fine as long as your temps are in check and that higher voltages are safer with lower temperatures.

My suggestion:

Find the stability of a known good chip on the board. Then if I were you I would find your maximum stability point with an air cooler at 90C, up vcore one tick and then IBT until failure. After failure double check with the known good chip to make sure the chip has degraded and not the PSU/mobo vrm's. If proven that the chip degraded at 90C, you can then repeat at 95C. You then have two data points from which to back extract the factors in the equation however you have two unknowns - current density and the correction factor. The current density can be roughly estimated by using a killawatt and taking 2 data points - idle @ stock and loaded @ overclocked. The delta is very rough estimate the dynamic power.

This should be enough to give you a rough equation of mean time to failure into which people can plug their vcore, frequency and temps.
Hmm ok I think I see what you're getting at. This is only going work at a high overclock, though. At a low OC (assuming all thermal throttling is disabled in BIOS), the chip might just run until it reaches #thermtrip.

Problem is finding an overclock that will actaully work at 90C...
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
SB Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600k Gigabyte P67A-UD5 B3 R9 290X 16GB 
Hard DriveOptical DriveOSMonitor
WD 2 TB, WD 1 TB, 250gb Liteon ihbs212 blu-ray burner/reader XP+W7 Benq XL2720Z 
KeyboardPowerCaseMouse
Ducky Shine 69/Year of the Goat/Shine 5 Seasonic Platinum X1000 Corsair 760T Logitech G502 with r0ach approved ™ sensor 
Mouse Pad
Puretrak Talent 
  hide details  
Reply
post #56 of 171
Thread Starter 
Exactly. I'm thinking of installing a fan controller. That way I can easily control the fans until I hit a "good" temp spot, ~85-90C.

Here's the plan either way.
I will first run a simple OC at 4.5GHz for 1 day with the lowest possible vcore and temps (using h2o loop).

That way I can easily know for sure that it was/is stable at 4.5.
After that, a friendly 5 days vacation for it at 85-90C full load using a fan controller and aircooling. And still at 4.5Ghz. Now the fun thing is. If it degrades, it should simply BSOD 124 within 5 days. If not, I can simply push on with vcore to 1.52-1.6. And use H2O. Heat would no more be a problem and it would be possible to run at a high voltage.

If anyone has a better idea, let me know.
Gene Z
(8 items)
 
5970CF H2O
(16 items)
 
Core X
(9 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K ASUS Max Gene Z ASUS 580GTX CU II G.Skill Ripjawz  
Hard DriveCoolingPowerCase
WD Black 1TB/64MB Air Corsair 850 Temjin TJ08-E 
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asrock Z68 Fata1ty Pro Gen 3 2 x ATI Radeon 5970 Corsair Vengeance 16GB 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 2 SSD 120GB Seagate 7200.12 80GB LG BD Burner GPUs watercooled / CPU stock 
OSMonitorKeyboardPower
Windows 7 24" Samsung LCD Some old junk FD 1000W 
CaseMouseMouse PadAudio
800D Microsoft something Its round, with a picture of a cookie Onboard (Realtek something) 
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Asus Rampage IV Extreme GTX580s (4) Corsair Vengeance 1600Mhz 
CoolingOSMonitorPower
1080 + 3x360 Windows 7 Samsung 8005 55" Corsair AX1200 
Case
Xigmatek  
  hide details  
Reply
Gene Z
(8 items)
 
5970CF H2O
(16 items)
 
Core X
(9 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K ASUS Max Gene Z ASUS 580GTX CU II G.Skill Ripjawz  
Hard DriveCoolingPowerCase
WD Black 1TB/64MB Air Corsair 850 Temjin TJ08-E 
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asrock Z68 Fata1ty Pro Gen 3 2 x ATI Radeon 5970 Corsair Vengeance 16GB 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 2 SSD 120GB Seagate 7200.12 80GB LG BD Burner GPUs watercooled / CPU stock 
OSMonitorKeyboardPower
Windows 7 24" Samsung LCD Some old junk FD 1000W 
CaseMouseMouse PadAudio
800D Microsoft something Its round, with a picture of a cookie Onboard (Realtek something) 
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Asus Rampage IV Extreme GTX580s (4) Corsair Vengeance 1600Mhz 
CoolingOSMonitorPower
1080 + 3x360 Windows 7 Samsung 8005 55" Corsair AX1200 
Case
Xigmatek  
  hide details  
Reply
post #57 of 171
I say use F@H. At least the computational power will go to something useful.
post #58 of 171
Thread Starter 
Good point. F@H would put about the same stress as Prime95 I suppose?
The whole test itself is to somewhat simulate the daily stress for a normal overclocker, or folder if you would like.

Although just making the whole degration process a lot faster. Like running insane voltages when not needed, making it run hot (less cooling) just for the sake.

But yeah, you make a point. F@H would work too.
Gene Z
(8 items)
 
5970CF H2O
(16 items)
 
Core X
(9 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K ASUS Max Gene Z ASUS 580GTX CU II G.Skill Ripjawz  
Hard DriveCoolingPowerCase
WD Black 1TB/64MB Air Corsair 850 Temjin TJ08-E 
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asrock Z68 Fata1ty Pro Gen 3 2 x ATI Radeon 5970 Corsair Vengeance 16GB 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 2 SSD 120GB Seagate 7200.12 80GB LG BD Burner GPUs watercooled / CPU stock 
OSMonitorKeyboardPower
Windows 7 24" Samsung LCD Some old junk FD 1000W 
CaseMouseMouse PadAudio
800D Microsoft something Its round, with a picture of a cookie Onboard (Realtek something) 
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Asus Rampage IV Extreme GTX580s (4) Corsair Vengeance 1600Mhz 
CoolingOSMonitorPower
1080 + 3x360 Windows 7 Samsung 8005 55" Corsair AX1200 
Case
Xigmatek  
  hide details  
Reply
Gene Z
(8 items)
 
5970CF H2O
(16 items)
 
Core X
(9 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K ASUS Max Gene Z ASUS 580GTX CU II G.Skill Ripjawz  
Hard DriveCoolingPowerCase
WD Black 1TB/64MB Air Corsair 850 Temjin TJ08-E 
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asrock Z68 Fata1ty Pro Gen 3 2 x ATI Radeon 5970 Corsair Vengeance 16GB 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 2 SSD 120GB Seagate 7200.12 80GB LG BD Burner GPUs watercooled / CPU stock 
OSMonitorKeyboardPower
Windows 7 24" Samsung LCD Some old junk FD 1000W 
CaseMouseMouse PadAudio
800D Microsoft something Its round, with a picture of a cookie Onboard (Realtek something) 
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Asus Rampage IV Extreme GTX580s (4) Corsair Vengeance 1600Mhz 
CoolingOSMonitorPower
1080 + 3x360 Windows 7 Samsung 8005 55" Corsair AX1200 
Case
Xigmatek  
  hide details  
Reply
post #59 of 171
Quote:
Originally Posted by XrOo View Post
Not a troll question. Getting a 2nd 2600k and the idea is to see what makes it degrade. Temps, voltages etc.

Is prime still the most aggresive "task" when it comes to load or is there an alternative?

Its for pure suicide, and research. There are too many "It has degraded" threads. It would be interesting to see what makes it degrade. Temps VS voltages.
Example: 3.4Ghz at 1.5 volts at full load for 2 days = result(?)

So, I need to stress everything. IMC, purely through the CPU? what would put Max load on ram etc?

Help me out here
Prime95 Blend with 1.55-1.65v for voltage degradation test and IBT with updated Linpack highest stable overclock while keeping under 98'c (close as possible)

Hate to ruin your fun early, but you won't degrade them for years even at that.
Yuki
(20 items)
 
Illya
(20 items)
 
Neptunia
(12 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K 5Ghz ASUS P8P67 Pro EVGA 1080 Ti FTW3 G.Skill RipJaws X 2133Mhz 16GB 
Hard DriveHard DriveHard DriveCooling
240GB Corsair Neutron GTX RAID0 Samsung 850 Evo 1TB WD Red 8TB Corsair H115i GTX 
CoolingOSMonitorMonitor
EK Vardar fans Windows 10 Dell u2713hm Apple Cinema Display 
KeyboardPowerCaseMouse
Razer BlackWidow 2013 CoolerMaster V1000 Corsair 760T Artic White Logitech G502 Proteus Spectrum 
Mouse PadAudioAudioAudio
CoolerMaster Swift-RX XL ASUS Xonar DX Schiit Magni Sennheiser HD650 
CPUMotherboardGraphicsRAM
Intel Core i7 Skylake-E X190 Nvidia Titan Volta 32GB 3200Mhz DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Pro 512GB Samsung 850 Evo 1TB 8TB WD Red Corsair H115i GTX 
CoolingOSMonitorMonitor
EK Vardar fans Windows 10 Dell u2713hm Apple Cinema Display 
KeyboardPowerCaseMouse
Ducky Shine CoolerMaster V1000 Corsair 760T Artic White Logitech G502 
Mouse PadAudioAudioAudio
CoolerMaster Swift-RX XL Asus Xonar DX Schiit Magni Sennhesier HD650 
CPUMotherboardGraphicsRAM
Core i5 6600 3.3Ghz Asus Z170M Pro AMD RX460 G.Skill 16GB 2133Mhz 
Hard DriveOSMonitorKeyboard
Samsung 850 M.2 256GB Windows 10 LG 34" 3440x1440 Ducky Shine 3 
PowerCaseMouseMouse Pad
CoolerMaster Vanguard 450W BitFenix Phenom Logitech G700S CoolerMaster Swift-RX 
  hide details  
Reply
Yuki
(20 items)
 
Illya
(20 items)
 
Neptunia
(12 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K 5Ghz ASUS P8P67 Pro EVGA 1080 Ti FTW3 G.Skill RipJaws X 2133Mhz 16GB 
Hard DriveHard DriveHard DriveCooling
240GB Corsair Neutron GTX RAID0 Samsung 850 Evo 1TB WD Red 8TB Corsair H115i GTX 
CoolingOSMonitorMonitor
EK Vardar fans Windows 10 Dell u2713hm Apple Cinema Display 
KeyboardPowerCaseMouse
Razer BlackWidow 2013 CoolerMaster V1000 Corsair 760T Artic White Logitech G502 Proteus Spectrum 
Mouse PadAudioAudioAudio
CoolerMaster Swift-RX XL ASUS Xonar DX Schiit Magni Sennheiser HD650 
CPUMotherboardGraphicsRAM
Intel Core i7 Skylake-E X190 Nvidia Titan Volta 32GB 3200Mhz DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Pro 512GB Samsung 850 Evo 1TB 8TB WD Red Corsair H115i GTX 
CoolingOSMonitorMonitor
EK Vardar fans Windows 10 Dell u2713hm Apple Cinema Display 
KeyboardPowerCaseMouse
Ducky Shine CoolerMaster V1000 Corsair 760T Artic White Logitech G502 
Mouse PadAudioAudioAudio
CoolerMaster Swift-RX XL Asus Xonar DX Schiit Magni Sennhesier HD650 
CPUMotherboardGraphicsRAM
Core i5 6600 3.3Ghz Asus Z170M Pro AMD RX460 G.Skill 16GB 2133Mhz 
Hard DriveOSMonitorKeyboard
Samsung 850 M.2 256GB Windows 10 LG 34" 3440x1440 Ducky Shine 3 
PowerCaseMouseMouse Pad
CoolerMaster Vanguard 450W BitFenix Phenom Logitech G700S CoolerMaster Swift-RX 
  hide details  
Reply
post #60 of 171
Thread Starter 
For years? Have you missed out the part where people say "It has degraded only after 1 month"?

:-P
Gene Z
(8 items)
 
5970CF H2O
(16 items)
 
Core X
(9 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K ASUS Max Gene Z ASUS 580GTX CU II G.Skill Ripjawz  
Hard DriveCoolingPowerCase
WD Black 1TB/64MB Air Corsair 850 Temjin TJ08-E 
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asrock Z68 Fata1ty Pro Gen 3 2 x ATI Radeon 5970 Corsair Vengeance 16GB 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 2 SSD 120GB Seagate 7200.12 80GB LG BD Burner GPUs watercooled / CPU stock 
OSMonitorKeyboardPower
Windows 7 24" Samsung LCD Some old junk FD 1000W 
CaseMouseMouse PadAudio
800D Microsoft something Its round, with a picture of a cookie Onboard (Realtek something) 
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Asus Rampage IV Extreme GTX580s (4) Corsair Vengeance 1600Mhz 
CoolingOSMonitorPower
1080 + 3x360 Windows 7 Samsung 8005 55" Corsair AX1200 
Case
Xigmatek  
  hide details  
Reply
Gene Z
(8 items)
 
5970CF H2O
(16 items)
 
Core X
(9 items)
 
CPUMotherboardGraphicsRAM
Intel 2500K ASUS Max Gene Z ASUS 580GTX CU II G.Skill Ripjawz  
Hard DriveCoolingPowerCase
WD Black 1TB/64MB Air Corsair 850 Temjin TJ08-E 
CPUMotherboardGraphicsRAM
Intel Core i7 2600K Asrock Z68 Fata1ty Pro Gen 3 2 x ATI Radeon 5970 Corsair Vengeance 16GB 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 2 SSD 120GB Seagate 7200.12 80GB LG BD Burner GPUs watercooled / CPU stock 
OSMonitorKeyboardPower
Windows 7 24" Samsung LCD Some old junk FD 1000W 
CaseMouseMouse PadAudio
800D Microsoft something Its round, with a picture of a cookie Onboard (Realtek something) 
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Asus Rampage IV Extreme GTX580s (4) Corsair Vengeance 1600Mhz 
CoolingOSMonitorPower
1080 + 3x360 Windows 7 Samsung 8005 55" Corsair AX1200 
Case
Xigmatek  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › How to degrade a 2600K most effectivly?