Overclock.net › Forums › Intel › Intel - General › help with my ram
New Posts  All Forums:Forum Nav:

help with my ram

post #1 of 3
Thread Starter 
hello iam newbie for o/c stuff but i did o/c my cpu i7 930 to 4kz but i have one problem with my this memory ram 3dimm PC3-16000 2000MHz C9 BLACK DRAGON TRIPLE CHANNEL dont run to 2000mhz only 1534mhz why doing this i try everything but nothing anyone help me please my system is this
motherbord ASUS P6X58D PREMIUM ,psu Chieftec 750w ,gigabyte gtx 480 and my settings to bios is this
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[191]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1531MHz]
UCLK Frequency.........................[3063MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.30]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.30]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
post #2 of 3
Thread Starter 
anyone?
post #3 of 3
Not 100% sure what you're asking, I assume it's why your memory won't run any faster than 1531MHz, not how to make the memory run faster?

Increase VQPI, there's no way your memory controller will hit 2000 CL9 without pushing it harder than 1.3V. Bear in mind the IMC is only rated by intel for 1066MHz, so even running at 1531MHz is overclocking the memory controller a lot. I've needed 1.42V on VQPI before to hit 2000-CL9 and that was on a gulftown so you may or may not need more, but I bet you need more than 1.3V
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › help with my ram