Overclock.net › Forums › Intel › Intel CPUs › 0x0124 BSOD after 11 hours of Prime95 blend
New Posts  All Forums:Forum Nav:

0x0124 BSOD after 11 hours of Prime95 blend

post #1 of 17
Thread Starter 
So I was running Prime95 blend test for about 11 hours, and was about to stop, but then I got hit with a BSOD. The BSOD was something like 0x0000000124, and I remember reading somewhere that the x0124 BSOD error was because of a lack of vcore I think. I was wondering if this is correct, or if this error could mean something else.
post #2 of 17
BSOD Codes for SandyBridge

0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500k [4.7 GHz] Asus P8P67 Pro B3 [2001 BIOS] MSI 7970 Lighting [Stock] G.Skill Ripjaws X 2x4GB [1600 MHz] 
Hard DriveOSMonitorKeyboard
Crucial M4 128GB + 2TB Raid 0 Cavier Black Windows 7 [Ultimate x64] [Dell U2412HM] + [HP 2311x] RosewillRK-9000 
PowerCaseMouse
Silverstone Strider [1500w] Corsair 300R Razer Deathadder 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500k [4.7 GHz] Asus P8P67 Pro B3 [2001 BIOS] MSI 7970 Lighting [Stock] G.Skill Ripjaws X 2x4GB [1600 MHz] 
Hard DriveOSMonitorKeyboard
Crucial M4 128GB + 2TB Raid 0 Cavier Black Windows 7 [Ultimate x64] [Dell U2412HM] + [HP 2311x] RosewillRK-9000 
PowerCaseMouse
Silverstone Strider [1500w] Corsair 300R Razer Deathadder 
  hide details  
Reply
post #3 of 17
Thread Starter 
Okay, thanks. I'll try raising the vcore up a bit, and then raising the other two if that doesn't work.

A little surprised about this though, since Small FFTs ran fine for 8 hours and it didn't end up BSODing until 11 hours in on the blend test.
post #4 of 17
If you already passed small FFT then it is most likely the memory controller at fault. So go with that voltage, whatever it's called for you - QPI/DRAM voltage, VCCIO voltage, CPU VTT voltage, etc...
FreeNAS
(9 items)
 
Beast
(14 items)
 
Alura :)
(11 items)
 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
i5 2500k Asus P8Z68-V Pro MSI R7970 Lightning BE 2 x 4GB G.Skill Ripjaws 2133mhz 
Hard DriveOptical DriveCoolingOS
Mushkin Enhanced Chronos 240GB and WD Black 1TB Asus DRW-24B1ST Cooler Master Hyper 212 EVO Windows 7 Ultimate x64 
MonitorPowerCase
Hannspree 24 inch Thermaltake Tough Power TP-750P 750W Gold Cooler Master HAF 932 
  hide details  
Reply
FreeNAS
(9 items)
 
Beast
(14 items)
 
Alura :)
(11 items)
 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
i5 2500k Asus P8Z68-V Pro MSI R7970 Lightning BE 2 x 4GB G.Skill Ripjaws 2133mhz 
Hard DriveOptical DriveCoolingOS
Mushkin Enhanced Chronos 240GB and WD Black 1TB Asus DRW-24B1ST Cooler Master Hyper 212 EVO Windows 7 Ultimate x64 
MonitorPowerCase
Hannspree 24 inch Thermaltake Tough Power TP-750P 750W Gold Cooler Master HAF 932 
  hide details  
Reply
post #5 of 17
Quote:
Originally Posted by Dopamin3;13663809 
If you already passed small FFT then it is most likely the memory controller at fault. So go with that voltage, whatever it's called for you - QPI/DRAM voltage, VCCIO voltage, CPU VTT voltage, etc...

Agreed, if it is CPU voltage BSOD for 124 errors it usually happens within the first hour.

But don't fully rule to out, just try the other suggestion first.
Bob's Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K MSI P67A-G45 MSI 6970 Lightning 2GB G Skill Ripjaws X (2x4GB) 1866mhz 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Corsair Force 3 SSD (60GB), X1 WD5000AAKS, X1 W... ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner Noctua NH-C14 Windows 7 64 bit 
MonitorKeyboardPowerCase
Asus VH238H Logitech G510 HALE90 750W NZXT Phantom Black 
MouseMouse PadAudioOther
Logitech G9x SteelSeries 4HD ASUS Xonar DGX / Audio-Technica ATH-AD700 Hauppauge! HVR-1250 TV Tuner 
  hide details  
Reply
Bob's Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K MSI P67A-G45 MSI 6970 Lightning 2GB G Skill Ripjaws X (2x4GB) 1866mhz 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Corsair Force 3 SSD (60GB), X1 WD5000AAKS, X1 W... ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner Noctua NH-C14 Windows 7 64 bit 
MonitorKeyboardPowerCase
Asus VH238H Logitech G510 HALE90 750W NZXT Phantom Black 
MouseMouse PadAudioOther
Logitech G9x SteelSeries 4HD ASUS Xonar DGX / Audio-Technica ATH-AD700 Hauppauge! HVR-1250 TV Tuner 
  hide details  
Reply
post #6 of 17
Thread Starter 
edit: nvm

I'll go ahead and try the other thing then. Any suggestions for how high I should raise those other settings?
Edited by wubikens - 5/28/11 at 12:46am
post #7 of 17
If you passed about 11 hours already, I would only raise the VTT value a notch or two in the bios and see if that fixes stability.
FreeNAS
(9 items)
 
Beast
(14 items)
 
Alura :)
(11 items)
 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
i5 2500k Asus P8Z68-V Pro MSI R7970 Lightning BE 2 x 4GB G.Skill Ripjaws 2133mhz 
Hard DriveOptical DriveCoolingOS
Mushkin Enhanced Chronos 240GB and WD Black 1TB Asus DRW-24B1ST Cooler Master Hyper 212 EVO Windows 7 Ultimate x64 
MonitorPowerCase
Hannspree 24 inch Thermaltake Tough Power TP-750P 750W Gold Cooler Master HAF 932 
  hide details  
Reply
FreeNAS
(9 items)
 
Beast
(14 items)
 
Alura :)
(11 items)
 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
i5 2500k Asus P8Z68-V Pro MSI R7970 Lightning BE 2 x 4GB G.Skill Ripjaws 2133mhz 
Hard DriveOptical DriveCoolingOS
Mushkin Enhanced Chronos 240GB and WD Black 1TB Asus DRW-24B1ST Cooler Master Hyper 212 EVO Windows 7 Ultimate x64 
MonitorPowerCase
Hannspree 24 inch Thermaltake Tough Power TP-750P 750W Gold Cooler Master HAF 932 
  hide details  
Reply
post #8 of 17
Thread Starter 
Quote:
Originally Posted by Dopamin3;13663892 
If you passed about 11 hours already, I would only raise the VTT value a notch or two in the bios and see if that fixes stability.

Okay, thanks again.

If this does end up being a problem with the memory, is it a problem that memtest could detect? Because before this blend test, I ran memtest86+ for 13 1/2 hours with 12 passes and no errors.

I've been having some trouble with this memory anyway though, running at its specified settings. This memory was supposed to run at 1600mhz at 8-8-8-24 @ 1.5v, but when I checked the bios after installing the ram, it showed as 9-9-9-24 @ 1.64v. I tried manually setting it to what it should have been at, and then I ran that Small FFTs test for 8 hours. Like I mentioned, I passed without any issues, but then I ended up running the blend test for about 4 hours and I got a BSOD (I didn't read the error, but I assumed it had something to do with the memory). So I increased my dram voltage to v1.55 and then I ran memtest86+ for 13 1/2 hours, and got 12 passes with 0 errors. After that, I ran this blend test that I was talking about for 11 hours, and got the 0x124 bsod.

edit: Wow, I'm beside myself with stupidity. I forgot to mention what cpu I've been using and with what kind of oc.

As the first poster guessed, I'm using a sb cpu, 2600k. I had it oc'd to 4.5ghz @ 1.29/1.3v. This is on a MIVE board. I'm also using this for my ram.
Edited by wubikens - 5/28/11 at 1:07am
post #9 of 17
If you ran memtest for 13.5 hours, I'm sure it's fine at 1.55v. However, when you bluescreened before it might not have necessarily been from the RAM. I would try to re run memtest86+ at the stock timings and voltage of 1.5v. You should be able to hit rated speeds for the kit, but if you wouldn't for some reason then you can always bump it back up. Also if command rate is set to 1T instead of 2T you may need slightly more voltage on the DRAM but not all too much.
FreeNAS
(9 items)
 
Beast
(14 items)
 
Alura :)
(11 items)
 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
i5 2500k Asus P8Z68-V Pro MSI R7970 Lightning BE 2 x 4GB G.Skill Ripjaws 2133mhz 
Hard DriveOptical DriveCoolingOS
Mushkin Enhanced Chronos 240GB and WD Black 1TB Asus DRW-24B1ST Cooler Master Hyper 212 EVO Windows 7 Ultimate x64 
MonitorPowerCase
Hannspree 24 inch Thermaltake Tough Power TP-750P 750W Gold Cooler Master HAF 932 
  hide details  
Reply
FreeNAS
(9 items)
 
Beast
(14 items)
 
Alura :)
(11 items)
 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
i5 2500k Asus P8Z68-V Pro MSI R7970 Lightning BE 2 x 4GB G.Skill Ripjaws 2133mhz 
Hard DriveOptical DriveCoolingOS
Mushkin Enhanced Chronos 240GB and WD Black 1TB Asus DRW-24B1ST Cooler Master Hyper 212 EVO Windows 7 Ultimate x64 
MonitorPowerCase
Hannspree 24 inch Thermaltake Tough Power TP-750P 750W Gold Cooler Master HAF 932 
  hide details  
Reply
post #10 of 17
Thread Starter 
Quote:
Originally Posted by Dopamin3;13663965 
If you ran memtest for 13.5 hours, I'm sure it's fine at 1.55v. However, when you bluescreened before it might not have necessarily been from the RAM. I would try to re run memtest86+ at the stock timings and voltage of 1.5v. You should be able to hit rated speeds for the kit, but if you wouldn't for some reason then you can always bump it back up. Also if command rate is set to 1T instead of 2T you may need slightly more voltage on the DRAM but not all too much.

Ah, okay. Yeah, I'm running it at 2T, so I should be fine then I hope.

I was also hoping to bug you one more time (hopefully only one more time, sorry lol). I checked my BIOS, but I can't seem to find any VTT setting. In the CPU/ram section of the bios, I only saw...

-dram
-vccsa
-vccio
-cpu pll
-pch
-pch pll

So would I only raise the vccio in place of the vtt? If so, what would you recommend increasing it to (not very familiar with this setting, so I don't want to risk setting it too high)? I included a screenshot of the voltages I was talking about from my bios screen.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 0x0124 BSOD after 11 hours of Prime95 blend