Overclock.net › Forums › Intel › Intel - General › Help overclocking Celeron D
New Posts  All Forums:Forum Nav:

Help overclocking Celeron D

post #1 of 7
Thread Starter 
ok i am rly new in this never did overclocking b4.. so if u guys can tell me how i know how far i can go with overclocking and is it possible at all i use this:
CPU



on this MB



thx in advance
post #2 of 7
You should try and get this as hot as you can without a heatsink on it and turn off all mobo auto sensors and see if you can get it to glow

Make use out of this obsolete P.O.S
Sandy B**ch
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k @ 4.5GHz 1.3V ASUS P8P67-M Pro PALIT GTX 560 Ti 4GB Kingston DDR3 Hyper-X 
Hard DriveOptical DriveOSMonitor
1TB Seagate 7200RPM 32Mb Cache Asus DVD Burner Windows 7 x64 Ultimate 32" LG 1080p 120Hz 2.4ms + 23.6" Asus 
KeyboardPowerCaseMouse
G15 OCZ 700W Modular HAF 922 Razer DeathAdder 
Mouse Pad
SteelSeries QcK+ 
  hide details  
Reply
Sandy B**ch
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500k @ 4.5GHz 1.3V ASUS P8P67-M Pro PALIT GTX 560 Ti 4GB Kingston DDR3 Hyper-X 
Hard DriveOptical DriveOSMonitor
1TB Seagate 7200RPM 32Mb Cache Asus DVD Burner Windows 7 x64 Ultimate 32" LG 1080p 120Hz 2.4ms + 23.6" Asus 
KeyboardPowerCaseMouse
G15 OCZ 700W Modular HAF 922 Razer DeathAdder 
Mouse Pad
SteelSeries QcK+ 
  hide details  
Reply
post #3 of 7
Sorry but you can't overclock your Celeron D on the motherboard you're using.

stock intel motherboards don't allow BIOS overclocking however you could give SETFSB a try
http://www.overclock.net/downloads/2...fsb-2-0-a.html
Phobia
(13 items)
 
  
CPUMotherboardGraphicsRAM
1100T - 4.40Ghz 990FXA-UD7 VTX3D HD6990 Ripjaws - 1900Mhz CL8 
Hard DriveOSMonitorPower
S3 120gb SSD + 4 x 2TB green Win 7 Ultimate Panasonic 42" + BenQ G2420HD AX1200 
Case
600T White 
  hide details  
Reply
Phobia
(13 items)
 
  
CPUMotherboardGraphicsRAM
1100T - 4.40Ghz 990FXA-UD7 VTX3D HD6990 Ripjaws - 1900Mhz CL8 
Hard DriveOSMonitorPower
S3 120gb SSD + 4 x 2TB green Win 7 Ultimate Panasonic 42" + BenQ G2420HD AX1200 
Case
600T White 
  hide details  
Reply
post #4 of 7
Not very far i'm affraid... maybe to 150-160MHz FSB with a decent cooler if you're running on air. I don't really know that board of yours, but the 478 socket couldn't push too much far ahead of stock in all of those i had.
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
post #5 of 7
plus the sub ~3.20Ghz Celeron D's were to hot to overlock anyway
Phobia
(13 items)
 
  
CPUMotherboardGraphicsRAM
1100T - 4.40Ghz 990FXA-UD7 VTX3D HD6990 Ripjaws - 1900Mhz CL8 
Hard DriveOSMonitorPower
S3 120gb SSD + 4 x 2TB green Win 7 Ultimate Panasonic 42" + BenQ G2420HD AX1200 
Case
600T White 
  hide details  
Reply
Phobia
(13 items)
 
  
CPUMotherboardGraphicsRAM
1100T - 4.40Ghz 990FXA-UD7 VTX3D HD6990 Ripjaws - 1900Mhz CL8 
Hard DriveOSMonitorPower
S3 120gb SSD + 4 x 2TB green Win 7 Ultimate Panasonic 42" + BenQ G2420HD AX1200 
Case
600T White 
  hide details  
Reply
post #6 of 7
Thread Starter 
ok thx a lot for answears (my laptop HP burned the videochis so i am stick whith this old basterd :S)

here we go with MB specification if anyone is interested

General
CPU- Socket 478 for Intel® Pentium 4 / Celeron D (Prescott, Northwood, Willamette) processors
- FSB 800/533/400MHz
- Supports Hyper-Threading Technology
- Supports Untied Overclocking Technology
Chipset- Northbridge: Intel® 865G
- Southbridge: Intel® ICH5
Memory- Dual Channel DDR memory technology
- 2 x DDR DIMM slots
- Supports DDR400/333/266 non-ECC, un-buffered memory
- Max. capacity of system memory: 2GB
BIOS- 4Mb AMI BIOS
- AMI Legal BIOS
- Supports "Plug and Play"
- ACPI 1.1 Compliance Wake Up Events
- Supports Jumperfree
- SMBIOS 2.3.1 Support
Audio, Video and Networking
Graphics- Integrated Intel® Extreme Graphics 2
- DirectX 8.0
- Max. shared memory 96MB
Audio- Cmedia 9761A 5.1 channel audio CODEC
LAN- Realtek PCI LAN 8101L
- Speed: 10/100 Ethernet
- Supports Wake-On-LAN
- Supports PXE
Expansion / Connectivity
Slots- 3 x PCI slots
- 1 x AGP 8X slot
- 1 x AMR slot
Connector- 2 x SATA 1.5 Gb/s connectors (No Support for "RAID" and "Hot Plug" functions )
- 2 x ATA100 IDE connectors (support 4 x IDE devices)
- 1 x Floppy connector
- 1 x IR header
- 1 x COM header
- CPU/Chassis FAN connectors
- 20 pin ATX power connector
- 4 pin 12V power connector
- CD in header
- AUX in header
- Front panel audio connector
- 2 x USB 2.0 headers (support 4 USB 2.0 ports; 2 of them are shared with USB4_5)
Rear Panel I/OASRock I/O Plus
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x VGA Port
- 1 x Parallel Port (ECP/EPP support)
- 6 x Ready-to-Use USB 2.0 Ports
- 1 x RJ-45 LAN Port
- Audio Jack: Line in / Front Speaker / Microphone
Other Features / Miscellaneous
Unique FeatureHybrid Booster:
- CPU Frequency Stepless Control
- ASRock U-COP
- Boot Failure Guard (B.F.G.)
Support CD- Drivers, Utilities, AntiVirus Software (Trial Version)
Accessories- Quick Installation Guide, I/O Shield
- Floppy/ATA 100 Cables
- 1 x SATA Data Cable
- 1 x SATA 1 to 1 Power Cable
- 1 x COM Port Bracket
- 1 x AMR card (optional)
Hardware Monitor- CPU Temperature Sensing
- Chassis Temperature Sensing
- CPU Overheat Shutdown to Protect CPU Life
- CPU Fan Tachometer
- Chassis Fan Tachometer
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore
Form Factor- Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm
OS- Microsoft® Windows® 98SE / ME / 2000 / XP compliant
Certifications- FCC, CE, WHQL
post #7 of 7
Hmmm. go to BIOS and try setting the FSB at 140, wich probably won't need extra voltage to reach that mark. Check if RAM speed changed, as i don't remember if it would or not. If changed, go to RAM and set it at a lower speed than speced. If possible, set all the timings to spec. You can see these in a sticker on each stick of RAM. SAve settings and boot to windows. Put some load on the CPU to test stability. prime95 or OCCT are recommended, but a syntethic benchamark like 3dmark should do to, unless you plan on doing some heavy workloads with it.
If successful, go to BIOS and try a higher setting.
Keep an eye on CPU and case temps.
You can reach 200MHz FSB without exceeding your boards FSB limit, but your chip may not reach there. This is just a guess.
Whenever the setting fails, you can add a little more voltage to the CPU. Stock is 1.4V. so you can start adding a small increase in voltage at a time and test. Whenever you feel like you are happy, or the chip seems to have hit a certain wall (adding a ridiculous amount of voltage doesn't improve stability at higher OC) save the last stable setting and you are done
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Help overclocking Celeron D