Overclock.net › Forums › Cooling › Water Cooling › Help me with dual GPU fittings
New Posts  All Forums:Forum Nav:

Help me with dual GPU fittings - Page 2

post #11 of 21
Thread Starter 
Quote:
Originally Posted by jacobthellamer View Post
I know this, why are you introducing two extra fittings? Do you want low restriction through that part of the loop?

You will have similar bend radius either way with one being 90° and the other 180°.



How about this with a 45°/90° adaptor?
http://www.frozencpu.com/products/69...c499s745#blank
http://www.frozencpu.com/products/83...l=g30c101s1306
Ty
So if I get two 90 degree fittings and put it on GPU2, would there still be enough room to connect a small tube between that fitting and the T-connector?

Quote:
Originally Posted by von rottes View Post
The bridged thing (serial loop?)
Hot water out of GPU1 and into GPU2....

Parallel cold in both hot out both
Quote:
Originally Posted by Somenamehere View Post
The water will be 1-2c difference max. Totally not worth it imo.
This, was just about to say. One of the amazing properties of water is its high specific heat. But that's not important--the reason why I want parallel is to have the least possible restriction and better flow rates.
post #12 of 21
Quote:
Originally Posted by kiwiasian View Post
Ty
So if I get two 90 degree fittings and put it on GPU2, would there still be enough room to connect a small tube between that fitting and the T-connector?
It would depend on your case but you should have enough room.

Here is my single card. Ignore the frosty tygon and temporary tube, I am redoing my loop soon.


Koru
(16 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 1090T - @4.26 NB@3.078 Asus - Crosshair IV formula 280X 16 GB Ggskill 
Hard DriveHard DriveHard DriveCooling
WD Black 640 crucial mx200 240 crucial m500 240 Water loop 
OSMonitorPowerCase
Win 7 Ultimate 64bit AOC 23" IPS + 21.5" Benq + samsung syncmaster Corsair HX650 Hand crafted - Koru 
Mouse
Deathadder 
  hide details  
Reply
Koru
(16 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 1090T - @4.26 NB@3.078 Asus - Crosshair IV formula 280X 16 GB Ggskill 
Hard DriveHard DriveHard DriveCooling
WD Black 640 crucial mx200 240 crucial m500 240 Water loop 
OSMonitorPowerCase
Win 7 Ultimate 64bit AOC 23" IPS + 21.5" Benq + samsung syncmaster Corsair HX650 Hand crafted - Koru 
Mouse
Deathadder 
  hide details  
Reply
post #13 of 21
Thread Starter 
Judging by the pic, I think it will fit. Thanks.

Question about the 90 degree fitting though...I am assuming that one end is a G1/4" thread and the other end is a 1/2" port for my tubing?
post #14 of 21
Quote:
Originally Posted by kiwiasian View Post
Judging by the pic, I think it will fit. Thanks.

Question about the 90 degree fitting though...I am assuming that one end is a G1/4" thread and the other end is a 1/2" port for my tubing?
Why don't you use some rotary 45 or 90 degree fittings? Then you can even have tubing go sideways as well.
Biggie Smalls
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500K Asus P8Z77-M EVGA Titan X Corsair Vengeance DDR3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Pro Samsung 850 Pro Western Digital Black Caviar 64MB Cache Western Digital Black Caviar 64MB Cache 
Optical DriveCoolingOSMonitor
LG Bluray Combo Drive Corsair H50 Windows 7 Professional x64 Dell UltraSharp U3415W 
KeyboardPowerCaseMouse
Ducky Shine 4 Blue/Red Corsair AX860 Corsair Obsidian 350D Razer Deathadder Chroma 
Mouse PadAudioAudioAudio
fUnc Mouse Mat Grace m9xx DAC/AMP ELAC B6 Schiit Lyr 2 
AudioAudio
Fostex TH-X00 (ebony cups with detachable cable... Sennheiser HD650 
  hide details  
Reply
Biggie Smalls
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500K Asus P8Z77-M EVGA Titan X Corsair Vengeance DDR3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Pro Samsung 850 Pro Western Digital Black Caviar 64MB Cache Western Digital Black Caviar 64MB Cache 
Optical DriveCoolingOSMonitor
LG Bluray Combo Drive Corsair H50 Windows 7 Professional x64 Dell UltraSharp U3415W 
KeyboardPowerCaseMouse
Ducky Shine 4 Blue/Red Corsair AX860 Corsair Obsidian 350D Razer Deathadder Chroma 
Mouse PadAudioAudioAudio
fUnc Mouse Mat Grace m9xx DAC/AMP ELAC B6 Schiit Lyr 2 
AudioAudio
Fostex TH-X00 (ebony cups with detachable cable... Sennheiser HD650 
  hide details  
Reply
post #15 of 21
Thread Starter 
Quote:
Originally Posted by OC'ing Noob View Post
Why don't you use some rotary 45 or 90 degree fittings? Then you can even have tubing go sideways as well.
Like one of these?
My main concern is that I don't know if it will extend far enough out from the inlet/outlet.

Edit: Just realized that on that fitting both ends are male/female G1/4"...sigh this is not going to work...
Are there any 90 degree fittings where one end is G1/4" and the other is 1/2"?
post #16 of 21
You just screw a 1/2" barb or compression into the end of the rotary.
Black Noise
(22 items)
 
  
CPUMotherboardGraphicsGraphics
i7 990X Asus Rampage III Extreme EVGA 980Ti EVGA 980Ti 
RAMHard DriveHard DriveHard Drive
24GB Corsair Dominator GT PC3-16000 Samsung 850 EVO Crucial CT750MX300 Seagate Momentus 2TB 
Hard DriveOptical DriveCoolingCooling
Seagate Momentus 2TB Sony Optiarc AD-7690H Slimline DVD-RW Blocks - EK Supremacy, 2 x EK FC-Titan X, EK FC... Radiators - 2 x Black Ice SR1 480, 2 x Black Ic... 
CoolingCoolingCoolingOS
Pumps - Swiftech 35X2 x 2 & Heatsinks Reservoir - EK Multioption X2 400 Advanced Fans - 20 x Noiseblocker PL2 Windows 7 Pro 64-bit 
MonitorKeyboardPowerCase
NEC MultiSync LCD2690WUXi Enermax Aurora Seasonic Platinum 1000 Case Labs TH10 & Pedestal 
  hide details  
Reply
Black Noise
(22 items)
 
  
CPUMotherboardGraphicsGraphics
i7 990X Asus Rampage III Extreme EVGA 980Ti EVGA 980Ti 
RAMHard DriveHard DriveHard Drive
24GB Corsair Dominator GT PC3-16000 Samsung 850 EVO Crucial CT750MX300 Seagate Momentus 2TB 
Hard DriveOptical DriveCoolingCooling
Seagate Momentus 2TB Sony Optiarc AD-7690H Slimline DVD-RW Blocks - EK Supremacy, 2 x EK FC-Titan X, EK FC... Radiators - 2 x Black Ice SR1 480, 2 x Black Ic... 
CoolingCoolingCoolingOS
Pumps - Swiftech 35X2 x 2 & Heatsinks Reservoir - EK Multioption X2 400 Advanced Fans - 20 x Noiseblocker PL2 Windows 7 Pro 64-bit 
MonitorKeyboardPowerCase
NEC MultiSync LCD2690WUXi Enermax Aurora Seasonic Platinum 1000 Case Labs TH10 & Pedestal 
  hide details  
Reply
post #17 of 21
Quote:
Originally Posted by kiwiasian View Post
Like one of these?
My main concern is that I don't know if it will extend far enough out from the inlet/outlet.

Edit: Just realized that on that fitting both ends are male/female G1/4"...sigh this is not going to work...
Are there any 90 degree fittings where one end is G1/4" and the other is 1/2"?
No, I am talking about this or this.

Quote:
Originally Posted by Big Elf View Post
You just screw a 1/2" barb or compression into the end of the rotary.
This will work too if you have a spare barb.
Edited by OC'ing Noob - 6/6/11 at 10:02am
Biggie Smalls
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500K Asus P8Z77-M EVGA Titan X Corsair Vengeance DDR3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Pro Samsung 850 Pro Western Digital Black Caviar 64MB Cache Western Digital Black Caviar 64MB Cache 
Optical DriveCoolingOSMonitor
LG Bluray Combo Drive Corsair H50 Windows 7 Professional x64 Dell UltraSharp U3415W 
KeyboardPowerCaseMouse
Ducky Shine 4 Blue/Red Corsair AX860 Corsair Obsidian 350D Razer Deathadder Chroma 
Mouse PadAudioAudioAudio
fUnc Mouse Mat Grace m9xx DAC/AMP ELAC B6 Schiit Lyr 2 
AudioAudio
Fostex TH-X00 (ebony cups with detachable cable... Sennheiser HD650 
  hide details  
Reply
Biggie Smalls
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500K Asus P8Z77-M EVGA Titan X Corsair Vengeance DDR3 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Pro Samsung 850 Pro Western Digital Black Caviar 64MB Cache Western Digital Black Caviar 64MB Cache 
Optical DriveCoolingOSMonitor
LG Bluray Combo Drive Corsair H50 Windows 7 Professional x64 Dell UltraSharp U3415W 
KeyboardPowerCaseMouse
Ducky Shine 4 Blue/Red Corsair AX860 Corsair Obsidian 350D Razer Deathadder Chroma 
Mouse PadAudioAudioAudio
fUnc Mouse Mat Grace m9xx DAC/AMP ELAC B6 Schiit Lyr 2 
AudioAudio
Fostex TH-X00 (ebony cups with detachable cable... Sennheiser HD650 
  hide details  
Reply
post #18 of 21
.... I thought there were SLI or Crossfirex watercooling adapters that were made for this..
Arcturus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 4690k @ 4.4ghz Asrock Z97 Pro4 Sapphire R9 390 G.Skill Sniper 2133mhz 8gb 
Hard DriveHard DriveCoolingOS
Samsung 850 Evo 250gb WD Blue - 1Tb Mirrored Hyper 212 Evo Windows 8.1 
PowerCaseAudioAudio
XFX TS 650w Corsair Carbide 200r Fiio E10/E9 Stack AKG Q701 
Audio
Grado SR325e 
  hide details  
Reply
Arcturus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 4690k @ 4.4ghz Asrock Z97 Pro4 Sapphire R9 390 G.Skill Sniper 2133mhz 8gb 
Hard DriveHard DriveCoolingOS
Samsung 850 Evo 250gb WD Blue - 1Tb Mirrored Hyper 212 Evo Windows 8.1 
PowerCaseAudioAudio
XFX TS 650w Corsair Carbide 200r Fiio E10/E9 Stack AKG Q701 
Audio
Grado SR325e 
  hide details  
Reply
post #19 of 21
Thread Starter 
Quote:
Originally Posted by Big Elf View Post
You just screw a 1/2" barb or compression into the end of the rotary.
It's not going to fit. Remember I am doing this over the distance of PCIe_1 and PCIe_2.

Quote:
Originally Posted by OC'ing Noob View Post
No, I am talking about this or this.
Juding by this picture and the size of the fitting, I don't think it's going to be able to cross over the edge of the PCB:
post #20 of 21
Thread Starter 
Quote:
Originally Posted by lostmage View Post
.... I thought there were SLI or Crossfirex watercooling adapters that were made for this..
Have a linky? I can't find one for parallel loops and universal GPU blocks.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Help me with dual GPU fittings