Overclock.net › Forums › AMD › AMD CPUs › HELP WITH AMD PHENOM X4 965 oc'ed to 3.8
New Posts  All Forums:Forum Nav:

HELP WITH AMD PHENOM X4 965 oc'ed to 3.8 - Page 2

post #11 of 21
Quote:
Originally Posted by sunsetreaper View Post
vcore? i adjusted the voltage from the cpu voltage control idk if i did that wrong
You might want to do a few things:

First: Calm down
Second: Turn off your computer
Third: Make sure your H50 is properly configured. Make sure the fans are facing the correct way, are in the correct spot, and make sure you do not have too much TIM
Fourth: Turn on your computer and take off your OC completely. Load failsafe defaults for your motherboard
Fifth: Log back onto OCN and read the hundreds of guides we have on here on how to properly and safely OC a CPU
    
CPUMotherboardGraphicsRAM
Intel i7 4720HQ Razer nVidia GTX 970m Integrated RAM 
Hard DriveOSMonitorKeyboard
M.2 SSD Windows 10 Professional Integrated Integrated 
MouseMouse PadAudio
Trackpad/Razer Mamba/Razer Orochi Corsair (portable)/Steelseries (Desk) Integrated Speakers 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i7 4720HQ Razer nVidia GTX 970m Integrated RAM 
Hard DriveOSMonitorKeyboard
M.2 SSD Windows 10 Professional Integrated Integrated 
MouseMouse PadAudio
Trackpad/Razer Mamba/Razer Orochi Corsair (portable)/Steelseries (Desk) Integrated Speakers 
  hide details  
Reply
post #12 of 21
You should clean your pump header and cpu again, and reapply your thermal paste and reseat the H50 and see, im confident your temps would go down. your temps are not dangerous unless they go past 62ish but, my own load temps are under your idle temps like, just an indication, mine goes to 44c max after about an hour and a half of prime 95 blend.
post #13 of 21
Quote:
Originally Posted by sunsetreaper View Post
vcore? i adjusted the voltage from the cpu voltage control idk if i did that wrong
Why don't try 1.35v first then if you get error on prime95 then adjust it
if its error again then adjust the vcore again. You need patience in overclocking.
love mah rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 4670k azrock z87 extreme 4 MSI 7950 windforce (Xfire) Corsair DDR3 8gb 
Hard DriveHard DriveHard DriveCooling
hyperX 120gb  wd black 600gb WD green 1.5tb zalman 9900 max 
OSMonitorKeyboardPower
windows 7 ultimate(x64) Vizio 32" corsair  corsait 750watts 
CaseMouse
thermaltake chaser mk-1 logitech G500 
  hide details  
Reply
love mah rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 4670k azrock z87 extreme 4 MSI 7950 windforce (Xfire) Corsair DDR3 8gb 
Hard DriveHard DriveHard DriveCooling
hyperX 120gb  wd black 600gb WD green 1.5tb zalman 9900 max 
OSMonitorKeyboardPower
windows 7 ultimate(x64) Vizio 32" corsair  corsait 750watts 
CaseMouse
thermaltake chaser mk-1 logitech G500 
  hide details  
Reply
post #14 of 21
Thread Starter 
Quote:
Originally Posted by Asmodean View Post
You should clean your pump header and cpu again, and reapply your thermal paste and reseat the H50 and see, im confident your temps would go down. your temps are not dangerous unless they go past 62ish but, my own load temps are under your idle temps like, just an indication, mine goes to 44c max after about an hour and a half of prime 95 blend.
you know i did that like 3-6 times already and like now im doing push/pull method and its still the same, i mean how tight do i have to put the sink to the cpu? i was pressing on it as i put screwed it on and if i do the paste again, do i do a drop and let it spread or i spread it myself? how much paste do i put? i put a peasize
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II 965 BE X4 BIOSTAR TA870U3+ RADEON 6950 HD 2GB 8gb DDR3 1600mhz 
Hard DriveOSMonitorKeyboard
500gb Windows 7 64bit 22' LG 1080p LED dell 
PowerCaseMouseMouse Pad
XION 1000w ANTEC 1200 Genius dell 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II 965 BE X4 BIOSTAR TA870U3+ RADEON 6950 HD 2GB 8gb DDR3 1600mhz 
Hard DriveOSMonitorKeyboard
500gb Windows 7 64bit 22' LG 1080p LED dell 
PowerCaseMouseMouse Pad
XION 1000w ANTEC 1200 Genius dell 
  hide details  
Reply
post #15 of 21
Quote:
Originally Posted by sunsetreaper View Post
you know i did that like 3-6 times already and like now im doing push/pull method and its still the same, i mean how tight do i have to put the sink to the cpu? i was pressing on it as i put screwed it on and if i do the paste again, do i do a drop and let it spread or i spread it myself? how much paste do i put? i put a peasize
NEVER spread it by yourself. If you have plenty of thermal paste, try as much as your using now, install the cooler then uninstall it and see if it spread itself all over the CPU. If it didn't, use more. If it spread all over the CPU but it's seeping out, use less.
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
post #16 of 21
Thread Starter 
Quote:
Originally Posted by Lostintyme View Post
NEVER spread it by yourself. If you have plenty of thermal paste, try as much as your using now, install the cooler then uninstall it and see if it spread itself all over the CPU. If it didn't, use more. If it spread all over the CPU but it's seeping out, use less.


when i play starcraft 2 it can go up to 56c but right now its 46-47c at 3.8ghz @ 1.4500v with corsair h50 with push/pull method
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II 965 BE X4 BIOSTAR TA870U3+ RADEON 6950 HD 2GB 8gb DDR3 1600mhz 
Hard DriveOSMonitorKeyboard
500gb Windows 7 64bit 22' LG 1080p LED dell 
PowerCaseMouseMouse Pad
XION 1000w ANTEC 1200 Genius dell 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II 965 BE X4 BIOSTAR TA870U3+ RADEON 6950 HD 2GB 8gb DDR3 1600mhz 
Hard DriveOSMonitorKeyboard
500gb Windows 7 64bit 22' LG 1080p LED dell 
PowerCaseMouseMouse Pad
XION 1000w ANTEC 1200 Genius dell 
  hide details  
Reply
post #17 of 21
Quote:
Originally Posted by sunsetreaper View Post
when i play starcraft 2 it can go up to 56c but right now its 46-47c at 3.8ghz @ 1.4500v with corsair h50 with push/pull method
Download prime95 and run that. Really stresses temps. Try the thermal paste method listed in my previous post.
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
post #18 of 21
Thread Starter 
Quote:
Originally Posted by Lostintyme View Post
Download prime95 and run that. Really stresses temps. Try the thermal paste method listed in my previous post.


ok so if i do that, do i have to clean off the thermal paste i have on it right now? or i can use the same one already?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II 965 BE X4 BIOSTAR TA870U3+ RADEON 6950 HD 2GB 8gb DDR3 1600mhz 
Hard DriveOSMonitorKeyboard
500gb Windows 7 64bit 22' LG 1080p LED dell 
PowerCaseMouseMouse Pad
XION 1000w ANTEC 1200 Genius dell 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD PHENOM II 965 BE X4 BIOSTAR TA870U3+ RADEON 6950 HD 2GB 8gb DDR3 1600mhz 
Hard DriveOSMonitorKeyboard
500gb Windows 7 64bit 22' LG 1080p LED dell 
PowerCaseMouseMouse Pad
XION 1000w ANTEC 1200 Genius dell 
  hide details  
Reply
post #19 of 21
Quote:
Originally Posted by sunsetreaper View Post
when i play starcraft 2 it can go up to 56c but right now its 46-47c at 3.8ghz @ 1.4500v with corsair h50 with push/pull method
That's a bit too much vcore for 3.8GHz IMO. Bring it down a bit, to at least 1.4v and you'll see a temp drop.
T3k
(13 items)
 
The Tibaldi
(9 items)
 
WooJoo
(13 items)
 
CPUMotherboardGraphicsGraphics
Intel i5 3210 h77 HD4000 GeForce 640 LE 
RAMHard DriveOSOS
4gb of something 5400rpm slowness 13.04 Ubuntu x64  Windows 8 Pro 
Monitor
1920x1080 
CPUMotherboardGraphicsRAM
965 BE 4.0GHZ (250 x 15.5) @1.5V m2n32 sli deluxe - 2000mhz @ 1.3V Asus TOP 5850 1GB 950/1200 Kingston HyperX 5-5-5-15 
Hard DriveOptical DriveOSMonitor
WD Velociraptor 150GB, WD raptor 74gb TDK 880N DVDRW Windows 7 x64 Ultimate Westinghouse 22" lcd 
KeyboardPowerCaseMouse
saitek eclipse II Corsair 620W modular Cooler Master ATCS 840 black emprex 
  hide details  
Reply
T3k
(13 items)
 
The Tibaldi
(9 items)
 
WooJoo
(13 items)
 
CPUMotherboardGraphicsGraphics
Intel i5 3210 h77 HD4000 GeForce 640 LE 
RAMHard DriveOSOS
4gb of something 5400rpm slowness 13.04 Ubuntu x64  Windows 8 Pro 
Monitor
1920x1080 
CPUMotherboardGraphicsRAM
965 BE 4.0GHZ (250 x 15.5) @1.5V m2n32 sli deluxe - 2000mhz @ 1.3V Asus TOP 5850 1GB 950/1200 Kingston HyperX 5-5-5-15 
Hard DriveOptical DriveOSMonitor
WD Velociraptor 150GB, WD raptor 74gb TDK 880N DVDRW Windows 7 x64 Ultimate Westinghouse 22" lcd 
KeyboardPowerCaseMouse
saitek eclipse II Corsair 620W modular Cooler Master ATCS 840 black emprex 
  hide details  
Reply
post #20 of 21
Quote:
Originally Posted by sunsetreaper View Post
ok so if i do that, do i have to clean off the thermal paste i have on it right now? or i can use the same one already?
I think you should take the H50 off, reseat the thermal paste, run prime95, and for a few hours at the least and report back to us.
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD FX-8150P GIGABYTE 990FXA-UD5 Dual 5870s G. Skill 8GB 1600MHZ 7-8-7-24 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, 1.5TB, 250GB, 80GB DVD-RW+Fan controller {Windows 7 x64} {ASUS} 23" 1080P LED + Dual Samsung 19" 1280x1024 
KeyboardPowerCaseMouse
Basic Logitech keyboard Xigmatek NRP-MC1002 Silver Xigmatek Elysium w/ window, 15 fans Logitech G9x 
Mouse Pad
Xigmatek 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › HELP WITH AMD PHENOM X4 965 oc'ed to 3.8