Quote:
Originally Posted by
MistralÂ

Sorry my mistake I thought you had an FX6100, the only way to increase the ram speed is to increase the CPU BUS Frequency, you need to increase it too 234 that will give you 1872Mhz but you will have to adjust the multi for the CPU, CPU/NB and HT link as they will increase as well. You may have to increase the CPU/NB voltage to stabilize the IMC as the controller in your chip is not rated above 1600Mhz.
Alright so i got that settled had to bump the HT and CPU/NB to 2340Mhz to get it to boot.I have the CPU BUS set to 234 and the multiplier set to 17.Not sure were i should go from here.Thanks


Should i set all the voltages manually or leave them as auto?

Update: passed 40 runs of LinX going to run prime blend while im at work..
Edited by Xaphan187 - 3/2/12 at 8:24pm