Originally Posted by DeeJaySypki
On air Mugen 2 + 2xSlipStrem 120mm (nothing special)
I need to know how those special option in Sabertooth change for example 6x4GHZ
or meyby its nothing important and leave it to AUTO :E
CPU current capability ?
CPU power phase control ?
... and moor ...
speed - 6x4000Mhz
CPU/NB - 3000Mhz
vcore - 1.404v
Cpu/nb - 1.3v
Okay, You always want to start by disabling Turbo, C1E, Cool n' Quiet, and all spread spectrums.
As for current capability on an overbuilt board like the Sabertooth I think it's fine to leave at 100%. The only setting I would leave at auto is voltage frequency. Various voltages other than Vcore and CPU/NB should just be set to their default (ex: VDDA - 2.5V, NB 1.8 - 1.8V, etc.). As for Vcore your max should either be whatever your cooling setup can handle or 1.55V. AS for the CPU/NB, if you leave it at or around 2000MHz, 1.15 - 1.2V should be fine, but for the sake of heat I wouldn't pass 1.3V, even when trying to squeeze out maximum clocks. Possibly the most important thing to play around with is the LLC. In my experience with the Sabertooth, it has never helped, so I leave it at "Standard." You have to experiment to see at what level it actually helps you in overclocking, because it may just tack on voltage that you don't need. I don't recommend ever using the highest setting of LLC though, even if you find that LLC is a good thing on your board.
If you have anymore questions please PM me, as I don't want to flood this thread with info that's already in a lot of overclocking guides.